Area

160 centimeters are 1.60 meter.

Assuming 1 meter = 3.28 feet, 1.74 meters would thereby equal 5.62 feet. 1.74 m is about 5.7 feet or 5 ft 8.5 inch The answer to this question is 5.708592 feet or 68.5038 inches There are 174 centimeters in 1.74 meters. There are 2.54 centimeters in an inch. There are 12 inches in a foot.

174cm/2.54 = 68.5 inches

68.5 inches / 12 = 5.7 feet

or 5 feet 8.5 inches

McDowell County in North Carolina has a total area of 446 square miles.

Well, ten tenths=100% yes? So 2x5=10 2!

To convert meters to millimeters, you multiply the length in meters by 1000, since there are 1000 millimeters in one meter. For example, if you have 2 meters, you would multiply 2 by 1000 to get 2000 millimeters.

None, because square meters are an area and centimeters are a length or a distance. One cannot be converted to the other.

The answer is really impossible. Tonnage means weight or mass. Square yard means an area. One cannot be converted to the other. If you have cubic yards you can do a conversion if you know what material you are working with. But even infinite square yardage has no weight or mass. Use the following formula: Length (feet) X width (feet) X depthH (inches) / Density of Material (lbs/cubic ft) Example: What is the tonnage required for an 100' x 10' asphalt road 4" deep? 100' X 10' X 4" = 4000 / 160 (lbs asphalt per cubic foot) = 25 tons.

There are 10,000 square meters in one hectare.

There are 133,700 cubic feet in 1,000,000 gallons.

A millimeter is a unit of length and a square meter is a unit of area, so they can't be converted from one to another. If you mean 1500 square mm, we can convert that to square meters in the following way: a square meter has 1000 mm on a side, so the total area is just that squared, or 1,000,000 (1 million) square millimeters per square meter. For the final step, divide 1500 by 1000000 to get .0015 square meters.

There are 10,000 square meters in a hectare, which is equal to 0.01 square kilometers.

To find the area of a room, multiply the length times the width.

12 x 12=144

Assuming the room is measured in feet, which most are, the area is 144 square feet.

2.471. A hectare is 100 m by 100 m or 10,000 square meters.

For more precision use the exact definition of an inch (2.54 cm=1 in), 12 in = 1 ft, and 43560 ft^2=1 acre to obtain 100000000000/40468564224 or approximately 2.4710538146717.

The decimal (sometimes decimel) is an "outdated" unit of area that is still used in more rural parts of Bangladesh and India. It's about 1/100th of an acre, or about 40.46 square meters. That's about 435.5 square feet. On a regulation football field, that's the area from the goal line to about the 27 yard line, and the width of the field, if that helps.

14/25

Household and carpenter rulers are typically marked in feet and inches. For your question, find the percentage of a foot (.56) in inches - (one foot = 12 inches)12 x .56 = 6.72 inches. = 6 inches and .72 of an inch... convert one inch into 100 equal parts then divide by 72... 72/100... then the fraction can easily be found = 18/25. A typical ruler shows only 16 divisions of an inch, now you can see that it takes 4 of the 16th inch divisions to equal 48 and therefore you can estimate 36/4 or slightly over 18/32 and under 24/32. SO, on a ruler your mark should be slightly below 6 3/4 inches. If you cut at 6 3/4 inches, you can file off the remaining .03 inches. Most machinists rulers are marked in 10ths and 100ths.

Miles measures distance. Square miles measures area. therefore, you can not compare the two.

You can't convert cubic meters to square feet. Cubic units measure volume while square units measure area. To convert between the two requires the loss of a dimension.

Why, what are you planning? :P

But seriously, ethanol is simply fermented sugar. That's why grapes turn into alcoholic wine when fermented, the sugar in the grapes turns to alcohol.

So you are probably talking about growing sugar beet, which is going to require a fair amount of land to work. You would want a few acres at least.

There are 23,347.44 square feet in 536 of an acre.

The SI unit of area is the square meter (m2), which is a derived unit.

A cubic mile is a unit of volume that represents the amount of space occupied by a cube with sides that are each 1 mile in length. It is equal to approximately 4.17 billion cubic meters or 147.2 billion cubic feet.

984..2519685feet are in 300 meters

Direct Conversion Formula300 m*

1 ft

0.3048 m

=

984.2519685 ft

2000 pounds = 1 ton

If you have to dig a hole 270 feet wide by 470 feet long to a depth of 15 feet, you've got a lot of digging to do. The volume is a simple product, so 270 x 470 x 15 = 1,903,500 cubic feet. Since there are 27 cubic feet to the cubic yard, you've got 70,500 cubic yards of dirt to move! If your trucks carry 12 yards, that's 5,875 loads. That's a lotta fill!,

It has an area of 8,729 square miles and is the 47th largest US State.