How many square feet in a 3525 in area room?
If you mean a 35ft by 25ft room then it is 35*25 = 875 square feet
There are no "feet" in acres.
"Feet" means distance from one point to another, like the length of a piece of rope
or a car trip. "Acre" means area covered by a surface, like the amount of carpet to
cover the floor of a room, or the amount of land needed to produce a million bushels
of corn. The two units measure different types of things, and they can't be converted
to each other.
1 acre = 43,560 square feet (not feet)
1/2 acre = 21,780 square feet
What is 460 square milles in kilometers?
1 km = 1 mi * 8/5
1 km**2 = mi**2* (8/5)**2
460 mi**2 * 64/25= 1177 sqkm
How many acres in a fourth a mile?
Awesome! I've just received my free minecraft giftcode!
>> minecraftnow.us <<
How do you convert weight to cubic feet of space?
You cannot.
Weight and volume (cubic feet of space) are two entirely different attributes of matter. Conversion between the two is not valid without additional information. For example, the weight of a cubic metre of lead on the surface of the earth will be a lot more than the weight of the same lump on the the surface of the moon because the moon's gravity is much weaker. And both of these will weight a lot more than a cubic metre of air (on earth).
How many square yards are in 2088 square feet?
9 sq feet = 1 sq yard so 2088 sq ft = 2088/9 sq yards = 232 sq yards
How many square meters are in a 6 x 11 foot room?
6*11 = 66 square feet = 6.13 square metres (to 3 sf).
An area of 5 feet by 800 feet is equal to 5 * 800 = 4,000 square feet.
How you can remove 4,000 square feet from an area of 2,000 square feet is a separate and nonsensical question however.
How many square feet in 11 feet 7 inch x 5 feet 9inch room?
A little over 66.6 square feet. Call it 67.
How many lineal feet in 450 square feet?
None, since there can be no conversion.
A linear (or lineal) foot is a measure of length in 1-dimensional space. A square foot is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
How long would it take to pressure wash 20320 sq.ft?
The time it takes to pressure wash an area depends on several factors, including the equipment used, the pressure applied, the condition of the surface, and the skill of the operator. Additionally, the efficiency of the pressure washer itself can vary.
As a rough estimate, a professional pressure washing operator can typically clean approximately 400-600 square feet per hour. However, this estimate can vary significantly based on the factors mentioned above.
Using the higher estimate of 600 square feet per hour, to pressure wash 20,320 square feet, it would take approximately:
20320 sq.ft / 600 sq.ft per hour = 33.87 hours
Please note that this is a rough estimate and actual time may vary. It is also worth considering that the operator may take breaks or encounter obstacles that could affect the overall time required.
59,424.77 to the nearest square mile?
59,424.77 rounded to the nearest square mile is 59,425Because 59,424.77 is closer to 59,425 than it is to 59,424
21 square feet EZ