BMW 5-Series

The negative terminal for the battery on a 1997 BMW 5 Series is typically located on the driver's side of the engine bay. It is connected to the battery and is usually marked with a minus (-) symbol. To access it, you may need to remove any covers or components that obstruct your view of the battery. Always ensure the vehicle is off before attempting to work on the battery.

To reset the brake lining light on a 1995 BMW 525i, first ensure that the brake pad wear sensor has been replaced if it was faulty. Next, turn the ignition to the "on" position without starting the engine. Then, press the trip odometer reset button and hold it while turning the ignition off and back on again. Release the button, and the brake lining light should reset.

The EML (Electronic Mail) system on a BMW typically refers to the electronic throttle control system. If you're looking for the throttle body or components related to the EML, it is usually located on the intake manifold of the engine. For specific models, it may be necessary to consult the owner's manual or a service manual for precise location details, as placement can vary by engine type and model year. If you're experiencing issues with the EML, it's advisable to have a qualified mechanic diagnose the problem.

You should consider changing the rotors on a BMW 530i when you notice signs of wear such as excessive scoring, warping, or if the thickness is below the manufacturer's specifications. Additionally, if you experience vibrations during braking or a decrease in braking performance, it may be time to replace them. Regular inspections during brake pad changes, typically every 20,000 to 30,000 miles, can help determine when rotors need replacing. Always refer to your owner's manual for specific maintenance recommendations.

If your 1991 BMW 525i won't reverse, it could be due to several issues, such as low transmission fluid, a faulty transmission linkage, or a failing transmission itself. It's also possible that the reverse gear has worn out or the transmission filter is clogged. Checking the transmission fluid level and condition is a good first step, followed by a professional diagnostic if needed.

On a 2004 BMW 530i, the transmission dipstick is located near the back of the engine bay, usually toward the passenger side. It is often integrated into the transmission fill tube and may not be easily visible without some effort. To check the transmission fluid level, you may need to remove a cover or access the area from underneath the vehicle, as many models do not feature a traditional dipstick like other cars. Always refer to the owner's manual for specific instructions regarding fluid checks and maintenance.

As of now, there has been no official announcement regarding a fifth series of "The Thick of It." The show's creator, Armando Iannucci, has expressed that he believes the series concluded effectively with its fourth season and the film "In the Loop." While there is always interest from fans for more content, it seems unlikely that a new series will be produced.

To remove the outer headlight lens on a BMW X5, first, ensure the vehicle is turned off and the headlights are cool. Carefully detach any clips or screws securing the headlight assembly, which may be located at the top or sides of the assembly. Once the assembly is loose, gently pull it forward to access the lens. If you're aiming to replace or clean the lens, you may need to carefully separate it from the housing, often involving more detailed steps depending on the specific model year.

The BMW E34 typically uses a 12V battery, with common sizes being Group 48 or Group 49, depending on the specific model and engine configuration. The capacity generally ranges from 70Ah to 100Ah. It's important to check the owner's manual or the specifications on the existing battery to ensure the correct fit and performance.

To change the oil and filter on a 2004 BMW Z4, start by warming up the engine slightly to thin the oil, then turn it off and let it cool for a few minutes. Use a wrench to remove the oil drain plug and allow the old oil to drain completely into a pan. Replace the oil filter using an oil filter wrench, ensuring a new rubber gasket is in place. Finally, reattach the drain plug, fill the engine with new oil through the oil cap, and check the level with the dipstick.

To reset the rear window of a BMW 525i, first, ensure the ignition is on. Then, fully lower the window by pressing the window switch down until it reaches the bottom. Next, pull the switch up to raise the window all the way to the top and hold it for a few seconds after it closes. This process should recalibrate the window's position and restore its functionality.

The BMW 520 series typically requires a specific type of coolant known as BMW Antifreeze/Coolant, which is usually a concentrated ethylene glycol-based formula. It is important to use the coolant that meets BMW's specifications, often identified as BMW Longlife Coolant (usually blue or green in color). Always check the owner's manual for the exact specifications and dilution ratios, as these can vary by model year. Additionally, mixing different types of coolant can lead to system issues, so it's best to stick with the recommended product.

To check the oil level on a 1999 BMW 528i, first, ensure the car is on a level surface and the engine is off. Open the hood and locate the oil dipstick, which is typically marked with a bright yellow or orange handle. Pull out the dipstick, wipe it clean, reinsert it fully, and then pull it out again to check the oil level against the markings on the dipstick. Add oil if necessary, ensuring it meets the recommended specifications.

On a BMW 325i, the oil dipstick is typically located near the front of the engine, often on the driver's side. It is a long, slender tube with a handle, usually marked with a bright color for easy visibility. To check the oil level, you would need to pull the dipstick out, wipe it clean, reinsert it, and then pull it out again to read the oil level. Note that some newer models may not have a traditional dipstick, as they use electronic oil level sensors instead.

The BMW X5 offers a trunk space of approximately 33.9 cubic feet with the rear seats up. When the rear seats are folded down, this capacity expands to around 72.3 cubic feet, providing ample room for cargo and luggage. The versatile design makes it suitable for both everyday use and longer trips.

The torque settings for big end bearings on a BMW engine can vary depending on the specific engine model. Generally, for many BMW engines, the torque specification for big end bolts is typically around 40-50 Nm (29-37 lb-ft), followed by an additional angle torque of 90 degrees. It's essential to consult the service manual for the specific engine model for accurate torque specifications and procedures. Always use a calibrated torque wrench for precise measurements.

To replace the ignition switch in a 1998 BMW 528i, first disconnect the car battery to ensure safety. Then, remove the steering column covers by unscrewing the screws that hold them in place. After exposing the ignition switch, disconnect the wiring harness and unscrew the ignition switch from its housing. Finally, install the new ignition switch, reconnect the wiring, and reassemble the steering column covers before reconnecting the battery.

The BMW 545i, equipped with a 4.4-liter V8 engine, typically achieves a 0-60 mph time of around 5.0 to 5.4 seconds, depending on conditions and specific model year. This performance is bolstered by its rear-wheel-drive layout and responsive automatic transmission. The combination of power and luxury makes the 545i a notable performer in its class.

The headlight relay on a 1990 BMW 535i is typically located in the fuse box, which is found in the engine compartment. Specifically, it is usually situated on the driver's side near the battery. You can identify the relay by checking the diagram on the fuse box cover for its location. If you need to replace it, ensure the ignition is off and follow proper safety precautions.

To reset the oil change light on a 1992 BMW 118i, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within five seconds, which should trigger the reset. Finally, turn off the ignition and then start the engine to ensure the oil change light is no longer illuminated. If the light persists, repeat the process.

To disable the daytime running lights (DRLs) on a 2001 BMW 540i, you can use the vehicle's onboard computer system. Start by turning on the ignition without starting the engine. Then, press the gas pedal three times while turning the headlight switch from the off position to the parking lights and back to off. This should deactivate the DRLs. If this method doesn’t work, consult the vehicle's manual or consider using a specialized BMW diagnostic tool.

The BMW 530d, equipped with a diesel engine, typically offers impressive performance, with a 0-60 mph acceleration time of around 5.5 to 6 seconds, depending on the model year and specific configuration. It has a top speed of approximately 155 mph, which is electronically limited. Overall, the 530d combines strong power with efficient fuel consumption, making it a popular choice in the luxury sedan segment.

To add Freon to a 1998 BMW 528i, locate the low-pressure service port, which is typically found on the larger aluminum pipe connected to the AC compressor. Remove the cap from this port and attach the refrigerant can's hose to it. Make sure the engine is running and the AC is set to the maximum cool setting while adding the refrigerant according to the manufacturer's instructions. Always check for leaks and ensure the system is properly charged.

In a 2001 BMW 525i, the battery is located in the trunk, not under the hood. It is positioned on the right side of the trunk area, beneath a cover. Accessing the battery requires removing the cover to reach the terminals for maintenance or replacement.

Yes, you can change the mileage readout from miles to kilometers on a BMW X5. This can typically be done through the vehicle's settings menu on the dashboard display. Navigate to the "Settings" or "Vehicle Settings" option, find the "Units" section, and select kilometers instead of miles. Make sure to consult your owner's manual for specific instructions, as the process may vary slightly depending on the model year.