BMW 5-Series

The headlight relay on a 1990 BMW 535i is typically located in the fuse box, which is found in the engine compartment. Specifically, it is usually situated on the driver's side near the battery. You can identify the relay by checking the diagram on the fuse box cover for its location. If you need to replace it, ensure the ignition is off and follow proper safety precautions.

To reset the oil change light on a 1992 BMW 118i, turn the ignition key to the "on" position without starting the engine. Press the gas pedal three times within five seconds, which should trigger the reset. Finally, turn off the ignition and then start the engine to ensure the oil change light is no longer illuminated. If the light persists, repeat the process.

To disable the daytime running lights (DRLs) on a 2001 BMW 540i, you can use the vehicle's onboard computer system. Start by turning on the ignition without starting the engine. Then, press the gas pedal three times while turning the headlight switch from the off position to the parking lights and back to off. This should deactivate the DRLs. If this method doesn’t work, consult the vehicle's manual or consider using a specialized BMW diagnostic tool.

The BMW 530d, equipped with a diesel engine, typically offers impressive performance, with a 0-60 mph acceleration time of around 5.5 to 6 seconds, depending on the model year and specific configuration. It has a top speed of approximately 155 mph, which is electronically limited. Overall, the 530d combines strong power with efficient fuel consumption, making it a popular choice in the luxury sedan segment.

To add Freon to a 1998 BMW 528i, locate the low-pressure service port, which is typically found on the larger aluminum pipe connected to the AC compressor. Remove the cap from this port and attach the refrigerant can's hose to it. Make sure the engine is running and the AC is set to the maximum cool setting while adding the refrigerant according to the manufacturer's instructions. Always check for leaks and ensure the system is properly charged.

In a 2001 BMW 525i, the battery is located in the trunk, not under the hood. It is positioned on the right side of the trunk area, beneath a cover. Accessing the battery requires removing the cover to reach the terminals for maintenance or replacement.

Yes, you can change the mileage readout from miles to kilometers on a BMW X5. This can typically be done through the vehicle's settings menu on the dashboard display. Navigate to the "Settings" or "Vehicle Settings" option, find the "Units" section, and select kilometers instead of miles. Make sure to consult your owner's manual for specific instructions, as the process may vary slightly depending on the model year.

The BMW 520d M Sport typically uses BMW's Longlife-04 engine oil, which is a synthetic oil designed to meet the vehicle's specific performance requirements. It's recommended to change the oil and filter every 10,000 to 15,000 miles or annually, depending on driving conditions and habits. Regular check-ups and adhering to the vehicle's service indicator will help ensure optimal performance. Always consult the owner’s manual for the most accurate recommendations.

To change the transmission oil in a 2004 BMW 530i, start by lifting the car securely and placing a drain pan under the transmission pan. Remove the transmission pan bolts and carefully detach the pan to drain the old oil. Replace the filter if applicable, clean the pan, and install a new gasket before reattaching it. Finally, refill the transmission with new oil through the dipstick tube, ensuring you use the correct type and amount specified in the owner's manual.

To put the chime back on a BMW E39, first ensure that the vehicle's battery is connected properly, as a disconnected battery can disable the chime. Next, check the settings in the car's onboard computer using the OBC (On-Board Computer) to ensure that the chime feature is enabled. If the chime still does not work, it may be necessary to inspect the chime speaker or related wiring for any faults. If issues persist, consulting the vehicle's manual or a professional mechanic is recommended.

The BMW 320i typically requires about 5 to 6 liters of engine oil, depending on the specific model year and engine type. It's important to consult the owner's manual for the exact specifications, as oil capacity can vary slightly between different versions of the 320i. Always use the recommended oil type for optimal performance.

The fuse number for the lighter in a BMW 520 can vary depending on the model year and specific configuration. Generally, it is located in the fuse box, which is typically found under the dashboard or in the trunk. For precise information, it's best to consult the owner's manual or a fuse diagram specific to your vehicle's model year.

To fix lean conditions on both bank 1 and bank 2 in a BMW 540i, start by checking for vacuum leaks in the intake system, as these can cause an improper air-fuel mixture. Inspect the mass air flow (MAF) sensor and ensure it's clean and functioning correctly, as a faulty MAF can lead to incorrect readings. Additionally, examine the fuel system for issues such as a clogged fuel filter or failing fuel pump, which can restrict fuel delivery. If these components are functioning properly, consider checking the oxygen sensors and engine control unit (ECU) for further diagnostics.

The headlight fuse for a BMW 5 Series is typically located in the fuse box, which can be found in the engine compartment or under the dashboard on the driver's side, depending on the model year. To locate the specific fuse for the headlights, refer to the owner's manual, which provides a fuse diagram and details. Generally, the fuse is labeled with a number corresponding to the headlights. Always ensure the vehicle is off before checking or replacing any fuses.

A 2006 BMW 325i typically requires about 6.9 quarts of oil when equipped with the 3.0-liter inline-six engine. It's important to use the correct oil type, usually a synthetic 5W-30, and to check the owner's manual for any specific recommendations. Always ensure to check the oil level after filling to avoid overfilling.

If a 1987 BMW 528e cranks but doesn't start, it could be due to several issues. Common causes include fuel delivery problems, such as a faulty fuel pump or clogged fuel filter, or ignition system failures like a bad ignition coil or spark plugs. Additionally, a malfunctioning sensor, such as the crankshaft position sensor, could prevent the engine from starting. Checking these components systematically can help identify the root cause of the problem.

If you cannot see the odometer reading on a 1991 BMW 525i, it could be due to a faulty odometer gear, a burned-out bulb, or a malfunctioning instrument cluster. First, check the dashboard lighting to ensure it's not simply dim. If the lights are functioning, you may need to inspect or replace the odometer gear, which is a common issue in older BMWs. If you're unsure, consulting a mechanic or a specialist in vintage BMWs may be advisable.

On a BMW 530i, the brake fluid reservoir is typically located near the back of the engine bay, on the driver's side, close to the windshield. It is usually a translucent plastic container with a cap labeled for brake fluid. To check the fluid level, ensure the car is on a level surface and the engine is off, then inspect the markings on the side of the reservoir.

As of now, there are no plans for a fifth series of "Lark Rise to Candleford." The show concluded after its fourth series, which aired in 2011. Although it garnered a loyal fan base, the series was not renewed for further episodes, and the story was wrapped up in its final season. Fans continue to cherish the existing episodes, but any potential revival remains uncertain.

To add transmission fluid to a 2001 BMW 525i, first ensure the vehicle is on a level surface and the engine is running at normal operating temperature. Locate the transmission dipstick, usually found near the back of the engine bay, and remove it to check the fluid level. If low, use a funnel to add the appropriate type of transmission fluid through the dipstick tube, taking care not to overfill. After adding fluid, recheck the level and ensure it’s within the recommended range.

To read the oil dipstick on a BMW 528i, first ensure the engine is off and level. Remove the dipstick, wipe it clean with a lint-free cloth, then reinsert it fully before pulling it out again. Check the oil level against the marked indicators on the dipstick; the oil should be between the minimum and maximum marks. If it's low, add the appropriate oil type until it reaches the optimal level.

To unlock the alarm on a 2003 BMW 5 Series, use the remote key fob to press the unlock button. If the remote is unresponsive, you can manually unlock the driver's door with the key, which should deactivate the alarm. If the alarm still does not turn off, inserting the key into the ignition and turning it to the "on" position may also help. If issues persist, consult the owner's manual or seek assistance from a BMW dealer.

The Infiniti G35 rims may fit on a BMW E36, but compatibility depends on several factors, including bolt pattern, offset, and center bore. The G35 typically has a 5x114.3 bolt pattern, while the E36 uses a 5x120 bolt pattern, meaning the rims are not directly interchangeable. Adapters could be used, but they may affect handling and safety. Always consult with a professional before attempting to fit different rims.

To fix the driver’s seat in your 1998 BMW 740IL, first, check the seat adjustment mechanism for any visible obstructions or loose connections. If the seat is stuck or not adjusting, inspect the power seat switch and wiring for damage, and replace any faulty components. Additionally, ensure that the seat’s motor is functioning; if not, you may need to replace the motor. If the problem persists, consult a professional mechanic for a thorough diagnosis.

The 1995 BMW 525i typically features an air conditioning system with a refrigerant capacity of about 1.5 to 1.8 pounds (approximately 0.68 to 0.82 kg) of R134a refrigerant. It's essential to refer to the owner's manual or service documentation for exact specifications, as variations can occur based on the specific model and options. Proper maintenance and servicing are crucial for optimal performance.