TFTP (Trivial File Transfer Protocol) is a lightweight file transfer protocol that is most commonly used for booting computers over a network or updating devices attached to the network.
router>enable router#configure terminal router(config)#line vty 0 4 router(config-line)#password cisco router(config-line)#login to configure router with telnet you must set up password or secret for privilieged mode.
Is throughput always less than bandwifth?
Throughput in megabits per second will always be equal to or less than the bandwidth in megabits per second (it can't be higher). Throughput decreases as latency increases. For instance if you send a file to your neighbor two houses down the latency should be very low (assuming you are on the same network). However, if you send it to another city the latency will be higher and while your bandwidth remains the same, your throughput will decrease due to the latency between the locations. Note that this can be improved by optimizing the TCP window size on your computers. There is a free TCP optimizer program available on the web if you search on that term.
The difference is that the write mem command is being discontinued. It is being replaced by the copy command and is the one you should use on the cisco tests. I still use this command on some routers such as 831, 871, 3002, 2950, 2600 however it appears that as of IOS 12 it will be gone.
Hope this helps!
Ports are devices used to connect a personal computer(PC) to external devices,such as keyboards and mice.They are located at the back of the PC.But today,some ports are found on the front of the PC as well.
The abbreviation of STCP is a computer term. This abbreviation stands for Stream Control Transmission Protocol and is used in networking.
Objective type question and answer for client server architecture?
Q 1. What is Client-server Computing? a. Client/server is a computational architecture that involves client processes requesting service from server processes. b. Client/server is a computational architecture that involves Server processes requesting service from Client processes. c. hardware and software systems containing more than one processing element or storage element Q 2. What is a Client process? a.The client is a process (program) that sends a message to a server process (program) b. Q 3. What is a Server process? a. A server process (program) fulfills the client request by performing the task requested Q 4. What is a Two-Tier Architecture? a. A two-tier architecture is where a client talks directly to a server, with no intervening serverb. A two-tier architecture is where a client can not talks directly to a server. c. A two-tier architecture introduces a server (or an "agent") between the client and the server Q 5. What is a Three-Tier Architecture? a. A three-tier architecture introduces a server (or an "agent") between the client and the server b. A three-tier architecture is where a client talks directly to a server, with no intervening server c. A two-tier architecture is where a client can not talks directly to a server. Q 6. What is Cooperative Processing? a. Cooperative processing is computing which requires two or more distinct processors to complete a single transaction b. Cooperative processing is computing which requires single processors to complete a single transaction. c. Is an architecture introduces a server (or an "agent") between the client and the server Q 7. What is Distributed Processing? a. The distribution of applications and business logic across multiple processing platforms. b. The distribution of applications and business logic inside single processing platforms. c. Computing which requires single processors to complete a single transaction. Q 8. What is Remote Data Management? a.In remote data management, the entire application resides on the client and the data management is located on a remote server/host. b. In remote data management, the entire application resides on the Server and the data management is located on a remote Client c. Is computing which requires two or more distinct processors to complete a single transaction Q 9. What is OSF-DCE? a. DCE is the Distributed Computing Environment, from the Open Software Foundation. b. Q 10. What is CORBA? a. CORBA stands for the Common Object Request Broker Architecture. b. Confederation of Regions Broker Architecture c. Certificate of Registration Broker Architecture Q 11. Which of the following protocols is used in the internet a. X.25 b. IBM c. TCP/IP d. UUCP Q 12. A port no. 2000 is used on both PCs of a network for an application. Then the following layer in a Network is needed for handling such a connection. a. Network layer b. Transport layer c. Physical layer d. Data link layer Q 13. One needs to send the data to hosts on the network at once. The data must be received only by the hosts for whom it is intended. The following topology should be used. a. Broadcast b. Point to point c. Multicast d. None of the above
Why do you frequently receive server not found errors?
You have problems either with network connection, proxy server if you have any, or firewall. Also in can your network card which is actually the worst case.
When you secure a wireless network using MAC address filtering is data sent over the network secure?
To make it secure you have to use encryption which is available in almost all routers.
LAN (Local area network) connects devices (computers) that are within a relatively small geographical are like a room or a building. The most popular connection technology for LANs is Ethernet.
There are millions of types of different networks in the world. These networks may be as simple as a computer network for example.
What class of network is each IP addresses?
CLASS A - 1-126 (10.0.0.0) 1 n/w, 3 host CLASS B - 128-191 (172.16.0.0) 2 n/w, 2 host CLASS C - 192- 223 (192.168.0.0) 3 n/w, 1 host CLASS D - 224-239 CLASS E - 240- 254
A firewall is a combination of software and hardware that helps prevent unauthorized access to a system through the Internet. Modern Windows OS's feature an inbuilt firewall.
Which type of Ethernet cable to be used for LAN setup?
It depends on the type of LAN; the most common cable in a LAN is UTP cable. In older LAN types you could also use coaxial copper cable.
For UTP cable that would be Cat 5, cat 5E or above for most LANs.
Originally referred to as KVS ( keyboard video switch), the KVM began circulation during 1980's. While the name behind the hardware is unknown. Its purpose to illuminate congested computer stock rooms has proven successful.
How can i pursue a master degree in IT if I Gain 3-years diploma from a college?
For master degree program you must have to passed and certified yourself for getting certification exams like Microsoft, Apple, CompTIA, VMware, SISCO etc. I give you the direct link access to site where you can easily get all exam dumps material in a very cheap rates and started your preparation with in few day's.
realbraindumps.com
What is the baud rate of the standard 10-Mbps Ethernet?
10 mbps ethernet uses Manchester encoding where each symbol is represented by 2 bit sequence. Hence the bits/symbol is 2. Since data rate = bits/symbol x symbol/seconds, symbols/seconds = baud rate = 5 mega baud
No internet connection for your laptop ecs-g320 using broadband?
You have to check you firewall, if you have it. And check the router settings. It might be the router fault. Sometimes people set up IP filters, you have to check it also.
What is the difference between a personal computer a server computer?
A server computer serves other computers (in a network) with programs and/or files. Think of it like a cafeteria. You get your tray (computer), walk down the line (pull down the file menu), when you see something you need or want you ask for it to be put on your tray (downloaded to your desktop computer). Your desktop computer is the same as a personal computer.
"Dot gov" refers to how you spell the Web site ending ".gov" as in "whitehouse.gov" or "senate.gov."
Every page is stored in the web in the hyper text format.. They are present in a tree structure of similar domain.. URL address refers to the traversal of a particular page present in the web and the path name of the page.
Without the following information being provided a person will not know what the correct answer is. It is important to also include what the following key elements are.
In what way is instant messaging a hybrid of client-server and P2P architectures?
If the messaging is done Peer to Peer, but there is a server which helps the peers to find each other by registering themselves on it, it is then a hybrid relationship.