Computers

Same as mcrophones always do, pick up noise. And either record it or transmit it. Or both.

When bilding a custom computer the CPU and motherboard are the two most important components. The main focus in deciding what type of motherboard is narrowing down which specific processor that will be installed. The faster the CPU then the more options become available, thus most manufacturers will supply appropriate options. At NTCPU we go into this in depth in our eBook about building CUSTOM CPU's. A recommende brand is ASUS due to their constant efforts to be a leader and also ading newer technologies as standards at affordable prices.

You need a network card and cat 5 cable and a ftp server to share files

encryption

only windows with built in encryption software is win 7 ultimate

Ability of a computer, computer software program, or hardware device to decode the human voice into digitized speech that can be interpreted by the computer or hardware device. Voice recognition is commonly used to operate a device, perform commands, or write without having to operate a keyboard, mouse, or press any buttons. For example, a user could say "open Internet" and the computer would open an Internet browser and allow that user to browse the Internet.

Brand-name computers are good quality but building your own can save you money and get you exactly what you want.

Brand-name is good quality, but they often bundle there PC's with lots of accessories and junk software that you probably will never use, and they jack up the price for it. I have recently built my first PC, it was surprisingly easy and fun. The first thing you should have in mind is what you want it to do, I built mine for games, so having upgradeable hardware is key...I wanted to be able to upgrade my graphics later on..

So you need to keep things in mind like this, do you want on-board video or not? I started with the motherboard and built around that. You need to fully understand that certain parts only work with certain parts e.g. you CANNOT stick a AGP video card into a PCI-E slot and expect it to work if you get my drift. Same goes for CPU/Mobo/RAM ect. So if you're building going from the ground up you need to remember this stuff, you CANNOT stick a 775 socket CPU in a 774 socket Motherboard. You will end up damaging both the CPU and the MOBO.

So keep that in mind, when you buy a Motherboard you should get a list of all the compatible hardware/software...Also there are lots of different Case types like : ASUS, Abit, MSI, DFI, ATX which all have different screw holes for the Motherboard and power supply...So advice would be to start with the motherboard and build up from that using the recommended hardware for the motherboard. Find a case that fits, make sure you have a Operating system disk handy, and make sure that OS is supported by all of your hardware.

You may also want to install the CPU yourself to save a lil money or you could opt for a Mobo w/pre-installed CPU and make things MUCH easier. I installed my CPU by myself was worried about it at first hearing a lot or horror stories of things going wrong, but personally I found it easy and had no problems installing the CPU whatsoever. Make sure you do the research first before attempting to install a CPU because you could easily destroy a CPU if you don't know what your doing. Don't be afraid to use a walk-through! It's a great feeling once you get her up and running and installing your new operating system :)

_______________________

I'm 17, and have been building my own PCs for just over 5 years now. It's not as hard as they say...

You have to decide what you want the PC for, gaming, work, server management etc. After that, you need to decide what the best hardware is for your specific purpose (speak to a local PC dealer or two).

E.g: For gaming, you want a dual core CPU at minimum (quad core or higher preferred). So make sure the motherboard can handle a good CPU as well as lots of ram (+- 8 gb) and pci-e slot. If you can get a SLI compatible board then go for it (can connect to graphics cards of the same type to double memory). Also aim for a gigabit on-board network card and 5.1 channel sound card. A good hard drive is essential (250gb should do at first). Make sure your mother board can handle SATA (Serial-ATA) drives as they transfer data at a much quicker rate than the old IDE... I would suggest going for a Gigabyte mother board if it is your first build. They are easy to manage and very reliable.

if you have laptop keep your firewall for a while but not too long then get a virus proctection and also for laptop charge to max then play on it and never charge it when the battry is 100% or you will muck up the unit and it won't work and you have to use it charged

For PC just do the things that i said for a laptop but get protection first

== == This depends on what you use your computer for and how often you add software to it. I use my computer 24/7 quite intensively, so I defragment every other day. My computer is set to do so at a time when I am not using it. I recommend that the average user defragment once a week. I also recommend looking at getting O&O Defrag if this is something that you believe is very important to your computer.

You might have to free up space to begin a defragmentation; the computer needs spare space to temporarily move the files around.

That depend on several factors: who refurbished it, how old the system is, and what price you're willing to pay for that system. Most factory refurbished units that have a warranty are great deals with relatively long lifespans if well maintained.

The commonest size in use is 31/2 inches. Standard capacity is 1.444MB.

Earlier models also used 5 1/4 inch diskettes, and even earlier ones used 8 inch diskettes. Those earlier diskettes were "floppy" because they were covered in nothing but a coated cardboard sleeve, and were not rigid thus, hence the popular name "floppy disk."

An ergonomic office desk is a desk designed to allow adjustments to both the height and tilt angle by the user. The height adjustments can be manual or motorized, depending on the sophistication and expense of the desk. Ergonomic desks can also be modular, with the work surface attached to cubical panelling.

Most ergonomic desks are built for use with computers and related equipment. The typical ergonomic desk has a cut-out hole in the work surface itself for the purpose of running computer cables off of the desk surface.

Features of ergonomic office desk:-

1. Figure out Your Normal Posture
2. Keyboard & Mouse tray
3. Maitaining eye level to Screens
4. Adjustable height
5. Required storage space
6. Good quality material

Benefits of Ergonomic office desk:-

1. Ergonomic desks reduce the risk of obesity:- Obesity is the result of consuming more calories than you burn. Of course, if it is the opposite, it weakens. Although sport is the most effective method of burning calories quickly, it is not enough if you are used to spending all your working day sitting in a chair. In fact, compared to sitting, the same amount of time spent standing is estimated to burn.

2. Ergonomic desks reduce back pain:- Most people who work in an office and spend between 8 and 12 hours sitting finally complaining of low back pain. Several studies conclude that people who start using ergonomic desks experience improvement in low back and neck pain after a 2-week period.

3. Increase productivity:- It increase productivity is that standing improves blood circulation and keeps the brain alert. It’s also harder to fall asleep if you’re upright instead of sitting. The reason is simple – you’re constantly on the lookout for what’s going on with your body.

4. Comfortable working environment:- It provide you the comfortable working environment as the adjustable feature makes it easy to adjust as per your sitting posture. A person can change the posture during the long hour sitting and work comfortably without any bodypain.

5. Increased Job Satisfaction:- For employees it provides a healthy working environment as a result employee will have a sense of full job satisfaction in terms of work and infrastructure both. They will become more efficient and productive.

An ergonomic desk can make a big difference while working for long hours and maintaining the proper health, without affecting the work. If you also want to provide your employees a safe, health and productive work environment with such quality ergonomic desk then value office furniture will be the best one for you. Dealing in premium quality office furniture at reasonable price.

It depends a lot on what you want to make with it. I tend to use iMovie HD because I like to have a timeline when I work, and I'm not as interested with importing things from a video camera. If you want easier camera importing and don't need a timeline, the newer iMovie '09 might be better for you. Ultimately the best option would be Final Cut (Pro, Studio or Express) which is more costly but has a lot more features and is more professional-grade.

Open your browser, press Alt+C, check your browser history

Brain can store or can save more and different things for a particular time, the more you save in the brain the more you forgot the the thing which you saved long time ago while Computer can save and store things for a long time without disapear dispite may be virus or system collapse

Dont go to point where it crashes

Most of HP notebook computers are manufactured in China. HP desktop computers are manufactured in many countries, one of them is Czech Republic. HP servers also are manufactured in few countries, including Czech Republic and Hungary.

MAN means to ask questions on WikiAnswers.

tool + nerd or electricity and nerd

1. Hardware and software configuration information

2. Application settings

3. Users preferences

That would be the motherboard. The processor is plugged into the motherboard, and the motherboard is mounted in the case.

Im having that same prob. I can get the bottom off easily but the top is SUPER stubborn. You can slide a credit card under neath the tabs. That seemed to work for other people even though that didnt work for me. What kind of computer? I have a macbook pro and that is hard. Depends wat kind of computer u have.

check the power supply

A modem. Modem is short for mudulator/demodulator. Telephone lines use analog signals which your computer cannot interpret. When analog signals reach a modem however, they are converted to digital signals and then passed to the computer. When sending data, this process is reversed.

Either delete them from your library on your iPad or connect your computer if you use a computer to sync and delete from there. Make sure you bin them on your iTunes as when you next sync or backup it will automatically replace the episodes back on your iPad which can be frustrating,