Dish Network

If you have a VIP receiver, you can go into the Main Menu, press the Menu button on your DISH remote, then press 6 (System Setup) and 8 (HDTV Setup). On the HDTV Setup screen you can select the resolution for your TV. Under TV Type, the higher the resolution (720i or 1080i) the larger the picture. The aspect ratio can be set to 16:9. Sometimes you will have some programs broadcast in a lower resolution.

Ray Calo

DISH Network

You press the *asterisk* key on your remote (also labeled "format"). Keep pressing it until you get what you want. It will scroll through a series of formats: normal, stretch, partial zoom, zoom, grey bar.

You are not able to transfer the recordings from the DVR receiver to your computer. The programming language used for the receiver is different than that used for computers.

You can use an external hard drive connected to your receiver to give you more storage capacity.

It's either you use a USB cable or an HDMI cable.

DISH is a leading satellite TV & internet provider offering the best programming and technology at an unbeatable value. Dish delivers the best video anywere at anutime utlizing state-of-the-art equipment & technology & award-winning HD & DVR Technology!

cutt.us/xhzgz

I found the answers below did not work with our Haier TV (model 15HL25S). I proceeded to go one by one through our remote's (Sanyo RMT-U340) TV codes and found that the 'AOC' brand code works for our Haier TV.

---

I looked on the Net for about two hours, including the answer below. While the answer below has great information, I didn't figure this out until I saw a TV for sale that said Advent Haier. I went back and tried the Advent codes from the remote instruction booklet, and the first Advent code worked.

Here are some codes that might work also for you, 01768,11034,11265, (this one worked for me on directtv remote) and 10178, also if you go to the DirectTV web site it will look up codes for your TV?

I encountered the same problem with my old 13" Haier tv i bought back in 2001. I bought a Radio Shack Family Favorite 5-in-1 remote for $14.99 since it was the only one that listed Haier. That code was 1034. Try that.

---

That didn't work for me unfortunately, so I referred to a combination of the troubleshooting of the 2 previous models (4-in1 and 3-in-1).

1. Press "TV" button

2. Hold "P" (program button) till the "TV" button flashes once then twice

3. Enter 9 9 1, and the "TV" should flash twice

4. Aim the remote at the TV and hold the Power button down for at least 3 seconds. (Remote automatically goes to first code but it probably wont work so go on to step 5)

5. Press CH+ repeatedly till the TV shuts off and stop immediately!

6. Hold "P" for 2 seconds

7. Hold "Select" for 2 seconds

8. Hold "P" for 2 seconds

9. Hold Power for 2 seconds and TV should turn back on.

If not. Repeat steps 1 thru 9. I know it sounds tedious but its the best bet. It took me three tries because my finger slipped and hit other buttons or I didn't stop when it shut off. I spent 3 hours looking for codes online and nothing worked.

Replacement on the Haier website is $19.99 plus a load in shipping. This beats that!

Should the 991 code search fail, those instructions are nearly identical to one for my remote (manufactured by Universal Electronics), and my user's guide includes Haier TVs on its manufacturers' codes list. Try 10768, 11034 and 11748.

Okay, new info. Just spoke with Haier customer service person who says that no Haier flat screen TVs or, for that matter, DVD players, are set up to be able to work with a universal remote; only their older tube TVs do. The Haier remote must be used. So we all can stop trying to find the codes. It wold have been nice is the user guides had revealed this unfortunate absence of functionality. Perhaps customer service didn't know.

I just got the code for my remote and it works great (code 11265).

what channel is the Steeler game on today I have no other than direct tv

The Oscars are going to be on channel 009-00 on dish.

There are three satellite tv providers. These are Dish Network, DirecTV and Skyangel. Dish Network was founded in 1995 and has 10 mission subsribers. DirecTV, founded in 1994 has the most subscirbers wtih 14.5 million users. Skyangel began in 1981.

Not knowing exactly what type of connectors are on both pieces of equipment, many TVs have RCA type connectors (round with holes on the middle of the female connectors) and are colored in Red Yellow and White. Assuming you have these types of connectors on both your TV and your stereo, get an RCA cable of sufficient length and connect the Red connector on the cable to the Red AUDIO output on the TV; connecting the other end of the cable to the Red Audio INPUT of the stereo. Do likewise with the white connector. Now you'll be able to play your TV sound thru your stereo system. Note the Yellow is usually reserved for Video.

The telephone number for Dish Network in Texas is 1-800-823-4929.

There are about 5 different packages through dishnetwork and all at reasonable prices. If you are looking for something basic you can go with the Dish America package which is 24.99 a month for 12 months. America's Top 120 is the next teir and that goes for 29.99 for 12 months. Then you have America's Top 120 Plus which goes for 34.99 a month for the first 12 months. America's Top 200 is 39.99 a month for the first 12 months and then last but not least is America's Top 250 and that goes for 49.99 a month for the first 12 months.

Call customer service and they will assist you. You will be sent boxes and you mail the receiver back.

GMC has a Yule Log.....although they are playing some commercials....channel 188 in my area.

At this time DISH Network is not currently offering the Barbie Channel.

channel 9645 and 095

I just wanted to clarify the previous answer. DISH Network is available in Canada but provided by Bell Canada. The programming packages are different from the packages in the United States. All equipment is provided by Bell Canada.

The top 10 codes for a Sharp TV are below!

Codes: 628, 605, 740, 741, 607, 652, 666, 658, 669, 679

You can go to www.dishnetwork.com to find channels and programming of shows you would like to view. In the upper right hand corner of the page select Check TV Schedule. On the next screen, select your programming package, input your zip code, then select Submit. On the following page a list of your available programming will display. You can conduct a search for the program you would like to view from this screen.

You can also perform a search on your receiver. Press your Menu button on your DISH remote to display the Main Menu, the press 2 (Themes and Search). Select Keyword, input the program title, and select Done. On the Themes and Search screen, select Get Results. A list of the broadcast times and channels will display.

31 is the stupid answer channel dumb butt

Dish Network is one company among several that offer Television programming that is transmitted via satellite directly to a small dish shaped receiving antenna mounted to the side of the customer's house or apartment building. Dish Network was designed as an alternative to the high cost cable companies. And many of Dish Networks users have saved money signing up for Dish Network through Dish Network Referrals. Save $50 when you get DISH Network with this Coupon Code: RFI011596316. Here are the instructions on using the code: 1. Call 855-318-6900 or visit dish.com/refer to order DISH. 2. Provide the certificate number (RFI011596316) at the time of order. This $50 offer is otherwise invalid.

Its the other way around.... the answer is wrong!

How do you program a BOSE system to the DISH system like a Hopper or 722.

i do NOT want to know how to program DISH, i already know that.

The remote code that will program your DISH Network remote to your Emerson TV will be one of the following (I recommend starting with the first code if it doesn't successfully program your remote you can try the following codes,) 632, 569, 672, or 516.