0
Electrical Engineering
Electrical engineering is a field of engineering that deals with the study and application of electricity, electronics and electromagnetism.
23,056 Questions
What is difference between self excited mixer and separately excited mixer?
location of local oscillator
- self - oscillator is integral to mixer
- separate - oscillator is a physically separate stage
A circuit in which elements are connected in series.For example in RLC series circuit resistor,inductor and capacitor are connected in series.
Which type of stator winding has two windings in parallel?
The type of stator winding that has two windings in parallel is known as a "double-layer winding." In this configuration, two separate sets of windings are placed in the stator slots, allowing for improved efficiency and reduced losses. This design can enhance the performance of the motor by allowing for better distribution of the magnetic field and reducing the resistance in the windings.
What is the purpose of insulation on electrical cables?
The function of electrical insulation is to resist electrical leakage. Shorting and personnel injury are effects of its failure to perform that function.
How much energy is given to each coulomb of charge that flows through a 1.5 volt battery?
1.5 volts means 1.5 joules/coloumb.
What is the difference between AGC and ABC fuses?
AGC fuses have glass body. ABC fuses have a ceramic body.
Resonant
What part of the hair dryer does the motor move?
fan
ANS2:It depends on your frame of reference. In most frames of reference you would say the motor moves the fan because you imagine the device to be stationary. From the fan's frame of reference, the motor turns all of the rest of the parts of the hair dryer and the rest of the universe, as well.Most people would say the motor turns the fan.
How reactance of inductors depends on frequency?
actually, inductance is directly proptional to the frequency according to the formula , so if frequency is more, then inductance is also more and vice versa
Describe advantages of electrical heating?
No piping to corrode, cleaner then oil , safer then gas, no flue piping required, cant freeze up like a pipe can, no hydraulic shock (water hammering) less controls to go bad
What is thermal electromotive force?
Electromotive force (EMF) is another term for voltage. Thermal EMF is voltage that is created by thermal (heat) energy, and there are several ways this can be done. Let's look at one.
The most common application of the idea of the generation of voltage by what we call thermoelectric effect (which is a form of contact potential) is probably the thermocouple. This device, which is essentially the placement of two dissimilar metals up against each other, will cause a difference of potential (a voltage) to appear across the junction of the two metals. This characteristic makes the device very useful in measuring temperature, to cite just one application of the idea. A link can be found below for more information.
What does a transformer convert?
A transformer transforms one level of voltage and current into another. A step up transformer raises voltage and lowers current, usually to make long power lines more efficient, and a step down transformer raises current and lowers voltage, usually to make it safe for homes and appliances.
There are other more specialized transformers as well. Isolation transformers provide galvanic (DC) isolation between primary and secondary. They may step the voltage up or down, or not, as needed. Current transformers, used as part of an instrumentation system, transform high current flow in a conductor (feeding a load, such as a motor), to a lower current, usually 5 amperes full scale. They are usefull when very large currents must be measured.
Another Answer
It is incorrect to say that a step-up transformer 'transforms voltage up, and current down' or that a step-down transformer 'steps voltage down, and current up'. This suggests that the primary current determines the secondary current, which it most-definitely doesn't! The value of the current in a transformer's primary winding is determined by the load, so the load determines the value of the secondary current which, in turn, determines the value of the primary current.
What is the difference between phase 3 and pivotal phase 3 clinical trials?
Trial from which data will be used to make significant claims These are the well designed Phase III trials whose data is generally used to get marketing approvals and information provided in the Package Insert or Product Information Leaflet. These are not to be confused with pilot studies or trials that ar done to only access the logistic check by enrolling few patients.
What is the best method to repair a fractional horsepower motor that has bad bearing?
To repair a fractional horsepower motor with bad bearings, first, disconnect the motor from its power source and remove it from its mounting. Carefully take apart the motor housing to access the bearings, then remove the old bearings using a bearing puller or by tapping them out gently. Clean the bearing surfaces, install new bearings, and reassemble the motor, ensuring everything is aligned properly. Finally, test the motor to ensure it runs smoothly before reinstalling it.
What voltage is used on a farm?
On farms, the most commonly used voltage for general electrical needs is typically 120/240 volts for residential areas and 480 volts for three-phase power used in larger agricultural equipment and machinery. Some farms may also use higher voltages, such as 600 volts, for specific applications. The choice of voltage depends on the size of the farm and the type of equipment used. Additionally, some farms may have specialized systems, such as solar or wind power, which can vary in voltage.
How does a low voltage thermostat prevent arcing when breaking or making contacts?
A low voltage thermostat prevents arcing during the breaking or making of contacts by using a low current and voltage to control the circuit. This reduced energy minimizes the potential for electrical discharge when contacts open or close, as lower energy levels result in less intense arcing. Additionally, many low voltage thermostats are designed with specific materials and contact configurations that further mitigate arcing, ensuring a safer and more reliable operation. Overall, these design features help prolong the lifespan of the contacts and enhance system efficiency.
The expression (5P10) denotes a permutation, specifically the number of ways to arrange 10 objects taken 5 at a time. However, since 10 exceeds 5, (5P10) is mathematically undefined and equals 0, as you cannot choose more items than are available. In general, the formula for permutations is (nPr = \frac{n!}{(n-r)!}), where (n) is the total number of items and (r) is the number of items to arrange.
An undervolt coil is an electrical component used in power electronics to regulate voltage levels, typically in devices like power supplies or voltage regulators. By reducing the voltage supplied to certain components, it helps improve energy efficiency, decrease heat generation, and enhance the overall performance of the device. This practice is often employed in computer hardware to optimize power consumption while maintaining stable operation. Overall, undervolting contributes to better thermal management and longevity of electronic components.
Why transformer on ship are usually air-cooled?
Transformers on ships are usually air-cooled to enhance reliability and reduce the risk of leaks associated with liquid cooling systems, which can be problematic in a marine environment. Air-cooling systems are also lighter and require less maintenance, making them suitable for the limited space and weight considerations on vessels. Additionally, air-cooled transformers can operate effectively in the various temperature and humidity conditions encountered at sea.
Why lighting contactor stick on?
A lighting contactor may stick on due to several reasons, such as mechanical failure, electrical overload, or a malfunctioning coil. Dust or debris can also accumulate in the contactor, preventing it from releasing properly. Additionally, if the control circuit is faulty or there is a continuous signal to the coil, the contactor may remain energized. Regular maintenance and inspection can help prevent these issues.
Why series inductor filter can not be connected to a half wave rectifier?
A series inductor filter cannot be connected to a half-wave rectifier because the inductor will block the DC component of the output, resulting in no current flow after the first half-cycle. In a half-wave rectifier, the output is pulsating DC, which means current only flows during one half-cycle, leading to the inductor not being able to store energy effectively. This configuration would cause poor filtering and inefficient operation, as the inductor would not allow the necessary current to pass through during the entire cycle.
To adjust the load sensor valve on a Navara ute after upgrading the spring, start by checking the valve's mounting position to ensure it's properly aligned with the new spring rate. You may need to adjust the linkage or the valve itself to ensure it accurately reflects the load. Additionally, consult the vehicle’s service manual for specific adjustments, as they may recommend changing the preload or repositioning the valve arm. Test drive the vehicle to confirm the load sensing system is functioning correctly with the new spring setup.
In a simple alternating current generator, electrical connections with the rotating coil are typically made using slip rings. These are conductive rings attached to the coil that rotate with it, allowing for a continuous electrical connection with stationary brushes that maintain contact with the slip rings. This setup enables the generated alternating current to be transferred to an external circuit while the coil rotates within a magnetic field.
Hi-Voltage can develop a system to connect with Green Industries' purchasing system through several options: they could implement an API integration to facilitate real-time data exchange, utilize EDI (Electronic Data Interchange) for standardized document transfers, or create a custom middleware solution to bridge the two systems. Additionally, they could explore cloud-based integration platforms that offer pre-built connectors for easier deployment. Ultimately, the choice will depend on the specific technical requirements and budget considerations.
