Geothermal

Outdoor temperatures fluctuate with the changing seasons but underground temperatures don't. Four to six feet below the earth's surface, temperatures remain relatively constant year-round. A geothermal system, which typically consists of an indoor unit and a buried earth loop, capitalizes on these constant temperatures to provide "free" energy. In winter, fluid circulating through the system's earth loop absorbs stored heat and carries it indoors. The indoor unit compresses the heat to a higher temperature and distributes it throughout the building. In summer, the system reverses, pulling heat from the building, carrying it through the earth loop and depositing it in the cooler earth.

The Department of Energy (DOE) and the Environmental Protection Agency (EPA) have both endorsed Geothermal Heat Pump systems as among the most energy efficient, environmentally clean, and cost effective systems for temperature control.

more info: http://goeggsales.com

Geothermal energy is harvested by drilling holes into bedrock that has sufficient nuclear decay to be warm, filling pipes (or the hole directly) with a liquid that is pumped back to the surface and where a heat exchanger transfers the heat to another medium (liquid).

There are many advantages to having Geothermal power! For more detailed information go here: http://www.squidoo.com/benefitsofgeothermal

Yes, you can potentially use your well for geothermal energy depending on factors such as the depth and flow rate of the well. A geothermal heat pump system can utilize the stable temperature of the underground water to heat and cool your home efficiently. It's best to consult with a professional geothermal contractor to assess the feasibility and design a suitable system for your well.

To clean geothermal HVAC coaxial coils, you can use a coil cleaning solution specifically designed for HVAC systems. Mix the solution with water according to the manufacturer's instructions and apply it to the coils using a sprayer. Let it sit for a few minutes to loosen dirt and grime, then rinse the coils thoroughly with water. Repeat the process if necessary until the coils are clean.

The main use of geothermal energy is to generate electricity by tapping into natural heat sources underground to produce steam, which then drives turbines connected to generators. Geothermal energy can also be used for direct heating and cooling in buildings by circulating water through underground pipes.

Geothermal energy can be found in the Philippines mainly in areas with active volcanic regions, such as in the provinces of Batangas, Albay, and Leyte. These regions have abundant geothermal resources that are harnessed for energy production through geothermal power plants.

It would need to be located over an area where the earths crust is relatively thin allowing for volcanic activity close enough to the surface that it can be reached with a core drill. Yosemite would be an excellent place.

Geothermal energy is recovered by what is called an "well". No I'm not talking about a wishing well. The well pumps up the wanted energy to a storage tank inside it. The energy is underground. That's why they use wells.

Geothermal Energy is definitely environmentally friendly . It uses the heat from the origin of the planet, radioactive decay of minerals and solar energy absorbed by the surface. Although it does not produce a lot of electricity and it is costs a lot, but it is definitely enviromentally friendly.

geothermal energy can be used for many diffrent things for example heat energy and is a good electricity conductor

The source of the heat, the hot rocks below the earth, would have to be continuously hot. Although over billions of years the centre of the earth is cooling, this is happening so slowly that we can consider geothermal as a renewable resource.

Geothermal power is produced by the internal forces of the earth. Since this is an ongoing process it is a renewable resource. Basically it is the heat from the magma inside the earth, the same that causes volcanoes and geysers.

The core of earth is so hot that it will keep heating the crust.

A geothermal pipe for a home generally needs to be buried at least 5-10 feet deep, but this can vary based on local regulations, soil type, and climate. Deeper depths may be required in colder climates to take advantage of more stable ground temperatures for efficient heat exchange.

By using the ground as the source for heat, much like an airsource heat pump uses air to remove the heat from the air on a cold day a geothermal system using the more consistent earth as the source for pulling heat out of the ground to heat your home in the winter and cool your home in the summer. The earths more consistent temperatures allow the system to work better than an air source system and in general the Geothermal system is more effiencent than any other type of heating used in homes.

Geothermal energy can be saved by using it in a more efficient manner through technologies like heat pumps and underground thermal energy storage systems. Increasing the overall efficiency of geothermal power plants and utilizing excess heat for district heating or other applications can also help in saving geothermal energy. Additionally, proper maintenance of geothermal wells and equipment can prevent energy losses and prolong the lifespan of the system.

Countries use geothermal energy because it is a renewable and sustainable energy source that reduces dependence on fossil fuels. Geothermal energy provides a consistent and reliable source of power and helps to reduce greenhouse gas emissions, making it an attractive option for countries looking to transition to cleaner energy sources. Additionally, geothermal energy has low operating costs and can provide benefits to local economies through job creation and energy security.

The most abundant energy source in the Americas is petroleum, which includes crude oil and natural gas. These fossil fuels have traditionally been the primary sources of energy in the region, supporting transportation, electricity generation, and industrial activities. However, there is a growing shift towards renewable energy sources such as wind, solar, and hydropower to diversify the energy mix and reduce carbon emissions.

Clouds are not an energy source themselves, but they can affect the amount of solar energy reaching the Earth's surface by reflecting, absorbing, and scattering sunlight. This can impact the overall availability of solar energy for technologies like solar panels.

Geothermal energy is used for electricity generation through power plants that tap into hot underground reservoirs of steam or hot water. It is also used for direct heating in residential and commercial buildings by circulating hot water through pipes. Additionally, geothermal energy is used for heating greenhouses to extend the growing season for plants.

Geothermal heat is used from within the Earth to produce steam by tapping into hot rocks or reservoirs of hot water deep underground. This steam is then used to generate electricity through geothermal power plants.

The source of heat in geothermal energy comes from the Earth's core, where heat is produced through the decay of radioactive elements. This heat is transferred to the Earth's crust, warming up underground water reservoirs that can be tapped for energy production.

Geothermal energy currently contributes to less than 1% of the world's energy supply.

Hot springs are caused by the geothermal heating of underground water that rises to the surface, typically through cracks or fractures in the Earth's crust. This heating can be due to magma chambers, geothermal gradients, or tectonic activity, resulting in the water emerging at the surface at temperatures higher than the surrounding environment.

The actual word "geo" means earth, and "thermal" refers to thermal energy which means heat. So in gross terms geothermal means: any type of thermal energy or heat from the earth that is used for various purposes for our society. Geothermal also can be studied from the perspective of understanding the earth, which pertains to volcanoes and plate tectonics and how the plates move around the earth.

Solar energy has technically existed for billions of years, as it originates from the sun's nuclear fusion. However, the practical use of solar energy through solar panels and other technologies began in the late 19th century.