answersLogoWhite

0

Global Positioning Systems (GPS)

The Global Positioning System is a satellite-based navigational system that provides dependable time and location information of a receiver. Maintained by the U.S. government, it is originally intended for military applications and later made freely accessible for civilian use.

1,372 Questions

Do porta potties have tracking devices?

Porta potties typically do not have tracking devices installed in them. However, some high-end or specialized units may have optional GPS tracking systems for monitoring purposes.

What is the difference between a GPS and a Satellite Navigation System?

A GPS (Global Positioning System) is a specific satellite-based navigation system developed and operated by the United States government. Satellite navigation systems are more generally used to refer to any navigation system that relies on satellites to provide location information, which can include other systems like GLONASS (Russia) or Galileo (EU). Essentially, a GPS is a type of satellite navigation system.

When did people start using the GPS?

The Global Positioning System (GPS) was first developed by the U.S. Department of Defense in the 1970s. It became fully operational in 1995 for civilian use, and since then has been widely adopted for navigation and location services worldwide.

What is the horizontal datum used by GPS?

The horizontal datum used by GPS is the World Geodetic System 1984 (WGS 84). It provides a consistent reference frame for defining positions on the Earth's surface.

Where to send Garmin Rino to get repaired?

If under warranty and the model is not discontinued, send it to Garmin. If warranty is expired or the product is discontinued, you are SOL. Garmin is not customer centric and has no intentions of changing their policy.

What was developed by the us to help military forces know exactly where they are on earth's surface?

The Global Positioning System (GPS) was developed by the United States to provide precise location information to military forces and users worldwide. By utilizing a network of satellites, GPS can determine a user's position, velocity, and time anywhere on Earth's surface.

What date was gps invented?

The concept of GPS (Global Positioning System) was developed in the early 1970s by the United States Department of Defense. The first GPS satellite was launched in 1978, and the full constellation of 24 operational satellites was completed in 1993.

What is expansion of gps and gis how many satellites are there in gps?

GPS stands for Global Positioning System, which is a satellite-based navigation system used for determining location and time anywhere on Earth. GIS stands for Geographic Information System, which is a framework for gathering, managing, and analyzing spatial data. There are typically 24 satellites in the GPS constellation that work together to provide accurate positioning information.

How do you delete address on navigation system?

To delete an address from a navigation system, you typically select the address from your saved locations or recent destinations list and choose the delete option. Alternatively, you can navigate to the address and then clear the destination from the current route. Check your navigation system's user manual for specific instructions as the exact steps may vary depending on the system.

Where is the 2000 Catera onstar fuse?

The OnStar fuse on a 2000 Catera is typically located in the fuse box under the dashboard on the driver's side of the vehicle. You can consult the owner's manual for the specific location within the fuse box.

What will be the conclusion for vehicle tracking sysyem using gps?

Designing and implementing enables us to establish relevant system design principles that are useful to other sensor.. It allows complexity to be placed at the appropriate levels of the system to achieve overall simplicity in system implementation. Our system decomposition allows each of the subsystems to be reusable by a wide variety of sensor network applications.The network management and debugging services are useful for deploying other sensor. We demonstrate a working system that not only monitors sensory data but also tracks and controls a higher tier system to accomplish a cooperative task in real time. The system assumes very little processing and communication requirements on the sensor. Logs of Tracking Server and Pointing out current location of vehicle. For vehicle tracking in real time, in-vehicle unit and a tracking server is used. The information is transmitted to Tracking server using GSM/GPRS modem on GSM network by using SMS or using direct TCP/IP connection with Tracking server through GPRS. Tracking server also has GSM/GPRS modem that receives vehicle location information via GSM network and stores this information in database. This information is available to authorized users,

What does gps stand for in science terms?

Global Positioning System. IT was in my sixth grade science bk.

Who does the voice on the Garmin gps?

The voice on Garmin GPS devices is typically generated using text-to-speech technology. Users can choose from a variety of voices and languages when setting up their device.

Why does your garmin keep turning on and off?

Your Garmin device may be turning on and off due to a low battery, software issues, or a faulty power button. Try charging your device fully, performing a software update, and checking if the power button is functioning properly. If the issue persists, contact Garmin customer support for further assistance.

How is the distance to a satellite measured in a GPS?

Triangulate the distance with geometry. If you know the distance between two points in a triangle and the angle between those two and the third, you can calculate the distance between all three.

We know the distance to the sun (the nearest star) because we dropped mirrors all over the moon and used them to bounce signals off and then time how long they take to go there and back, calculate the distance and then we've got two sides of the triangle and can figure out the third.

We can do the same with other stars.

Answer

The method outlined above is called "parallax". It is how we establish distances to stars near earth. Since the earth is moving around the sun (and as the guy above says we know the distance to the sun) we can use the "width" of the earths orbit as what we call the baseline. (the bottom of the triangle.) near earth stars (near still being very far away, the order of parsecs) will appear to move against the background of distant stars. We can take measurements from each "end" or the orbit and use them to calculate (as above) the distance to the star.

This is best demonstrated by holding your finger up in front of your face and looking at it through one eye at a time, the distance between your eyes serving as the baseline. if you could measure the apparent movement of your finger and you knew the distance between your eyes you could work out how far your finger was from your face.

Once we have the distance to a few nearby stars like this we start to use more outlandish methods.

Stars tend to fit into various types depending on colour (which indicates temperature) and age. If we know the distance to a star (by parallax) and we know what type it is we can use what is called the "standard candle" method to work out the distances to further away stars of the same type.

So - I know that a "type G2V" (the sun) is X bright if it's Y far away... i assume that a G2V which appears much dimmer is much further away - we know that brightness decreases related to the square of distance (can't remember the full equation of the top of my head) so you can use this method to pin down distances for loads of stars provided you can get a fixed reference the "standard candle" - obviously this method has issues, mostly to do with the light from stars being dimmed for reasons other than distance like dust in the way. However it's the best we've got!

Is removing your GPS ankle bracelet a felony?

It could be if it is a condition of parole, but will most likely be considered contempt of court if it is a pre-trial release situation. Getting caught removing it or without it is certainly going to exacerbate the case.

What does gps mean on a ring?

GPS on a ring likely stands for "Genuine Precious Stone," indicating that the ring contains a real and authentic gemstone.

What was the GPS originally created for and what is it actually used for today?

Well, the name kind of gives it away - Global Positioning System. Much like everything to do with technology and computers, it was originally created for military purposes, in this case the U.S. military for positioning of troops, ships etc.

Today it is still used for this, as well as for civil use. GPS is free to use for anyone with a GPS receiver.

What is the minimum number of 'global positioning system' satellites that are observable by a user anywhere on earth?

A user can typically observe at least 4 GPS satellites anywhere on Earth to accurately calculate their position using trilateration.

What happen when two of four diode in a bridge rectifier is short circuit?

You will get reduced amperage (or output) from the alternator. A alternator rated at 80 amps would probably only produce 50-60 amps. If a diode in a rectifier is shorted, then the alternator output would be greatly reduced or possibly no output at all.

How many satellites does the receiver need to be fixed on in order to know it's position?

A GPS receiver typically needs signals from at least 3 satellites to calculate a 2D position (latitude and longitude) and 4 or more satellites for a 3D position (latitude, longitude, and altitude). The receiver uses the signals from multiple satellites to triangulate its position on Earth.

Who maintains GPS satellites?

The United States Space Force is responsible for maintaining and operating the GPS satellites. They ensure that the satellite constellation is functioning correctly and providing accurate navigation and timing signals to users worldwide.

Which is a positive effect of the technological advance of going from a compass to a GPS?

A positive effect of the technological advance from a compass to GPS is increased accuracy and precision in determining one's location and navigating to destinations. GPS provides real-time tracking and detailed mapping capabilities, making it easier and more efficient to navigate unfamiliar areas. Additionally, GPS allows for the input of specific destinations, which can help save time and prevent getting lost.

What coordinates does GPS use?

GPS uses a coordinate system called WGS84, which stands for World Geodetic System 1984. This system uses latitude and longitude coordinates to pinpoint locations on Earth with high accuracy.

How do I upgrade the map on a Jensen NVX200 GPS?

"The company that generated the original maps has gone out of business and we have not been able to obtain compatible mapping software from another source. As a result, we have had to discontinue this product line and there will be no map updates. Please accept our apologies for any disappointment this may have caused."