0
HDTV
HDTV (High-Definition Television) is a new type of television that offers better resolution than a standard analog television. The different types of HDTV displays include plasma, direct-view, front screen and rear screen projection.
3,605 Questions
Do you need 1080p for a 37 lcd inch screen?
Buy LCD TV at http://watchliveauctions.com/lcd_tv
No matter what anyone tells you, the human eye can only detect between 720 and 1080 on a 37" screen if you sit closer than about 6 feet from your TV. 1080 is needed for BIG TVs to really get the full advantage of 1080.
Set up procedure for Phillips universal remote sru 3040 11?
You mean a Philips universal remote control SRU 3040 II.
Here is the Philips support page for this remote (both 3040 and 3040 II):
http://www.p4c.Philips.com/cgi-bin/dcbint/cpindex.pl?ctn=SRU3040/10&scy=GB&slg=en
At the bottom, you can download the 5MB manual (many languages; it's actually only a few pages per language, plus a big table of codes in the back).
------The following doesn't work with the sru 3040, but maybe with other models:
I have a Phillips universal, but not sure if it's the same model you are mentioning; anyway, here's what I have to do.....
Code search: (with desired device "on")
Push & Hold "Code Search" (stays lit)
Press desired mode (TV, VCR, etc…)
Press "Channel Up" repeatedly (up to 300 times)
Until channel changes
Press & release "Mute" to lock in code
Code Id:
Push & Hold "Code Search" (stays lit)
Press desired mode (TV, VCR, etc…)
Press & Release "Code Search" button
Press numeric numbers (0-9) watching red indicator;
1st "Blink" is 1st number of code, continue pressing numeric numbers, 2nd "blink" is 2nd number of code, 3rd :blink" is the 3rd digit of code.
Reset v-chip on a Sampo LCD TV?
Master over ride is 8,4,8,4 then the 100 button. A total of five digits
Which 3D LED TVs have the 2D to 3D conversion?
LG and Samsung have this feature.
Be aware that converting 2D to 3D is not a perfect process and the 3D images may not be accurate or realistic. 3D televisions are designed to work with 3D content so any simulation of 3D from 2D content must be regarded as a bonus feature.
Why do you get crosstalks with 3D TV and how do you prevent it?
If you're getting crosstalks, you probably have an active 3D TV. Active 3D TVs use shutter glass technology. The images are sent to each lens of the 3D glasses one at a time. Only one of your eyes is supposed to see the image at a time but sometimes both of your eyes see the same image at the same time. This creates a duplicate of an image.
How do you repair a RCA d52w19 TV?
It all depends on whats wrong with. If it's complicated it's best to just take it to a certified repair-man. If you break it while trying to fix it it really your problem.
A few LOW POWER stations were allowed to stay analog for a while based on their power and economic condition.
Your Samsung 3600 blu ray stays on load and doesnt do anything?
Happened to me and Samsung support said I had to send it in to be serviced. I haven't even had the unit 4 months yes and it's already broke due to a firmware upgrade from Samsung.
Does a LCD TV have electromagnetic field?
Yes, any device that uses power will have a electromagnet field though it might be small.
Why is gems tv going off the air?
GEM TV was broadcasting on Galaxy 19 located at 97° West via RRsat Global Communications who leases and sells programming space on transponder frequency 12060MHz (TP# 20 Ku) on Galaxy 19.
GEM TV pays a monthly fee to RRsat to broadcast their signal on that transponder. Since GEM TV was not generating revenue, they stopped paying RRsat. After months of negotiations, and after RRsat was unable to collect anymore payments from GEM TV, RRsat was forced to stop the transmission of their signal on Galaxy 19.
Why are so many newer TVs without analog audio outputs or headphone jacks?
For the same reason that new TVs no longer use analog video signals. Everything is switching to digital.
How long does it take to burn an image into a rear projection TV screen?
Rear projection televisions use a variety of technologies. The latest technologies are LCD and DLP which do not suffer from image burn. The older technology uses CRTs (cathode ray tubes) that are high brightness television tubes. These tubes are driven very hard to produce high light outputs and as a result, static images have been known to leave a permanent shadow on the tubes after a relatively short period.
The time taken for the effect to be seen varies greatly. In some instances, a one week old projector has shown signs of previous static images. In other cases, where static images are used only for short periods of time and are relatively low contrast, the effect isn't visible after many years.
To prolong the life of CRT projection tubes, avoid displaying static images for long periods. Do not over drive the brightness of the projector. Do not use static high contrast images and avoid computer generated images where the same image is shown in the same place repeatedly.
How long does expedited shipping from Canada to the US take?
usally it takes around 3-5 business days during the holidays it takes much longer 5-7 days
How do you stop those horizonal lines scrolling up your tv?
The horizontal line scrolling is usually caused by interference from another source. Make sure all your connections are tight. If that does not work, you may have to disconnect all inputs from your TV, and reconnect them one at a time until you find the source of the interference.
Where do you need a surge protector with a coax protector?
They are used to help protect things that are connected to the coax. It should be noted there is no real proof that there can be any protection from nearby lighting strikes or great voltage surges.
What is the digital channel for channel 4?
If you are in the USA, go to tvfool.com and click "signal locator". I know this sounds line a joke but is is NOT!
How can you tell if a blu ray disc is region B?
It would say so on either the disc or the disc case or even both
