0
Ithaca Firearms
Ithaca Firearms (Ithaca Gun Company) is a manufacturer of shotguns, rifles, and pistols since 1880. The original factory was located in New York but recently moved to Ohio. Their product lines catered law enforcement, military, and for sporting use.
1,406 Questions
There is a long list of shotguns that are marked Royal, but I cannot find the United Arms part of your marking in my lists. All that I do find are attributed to Anciens Etablissments Pieper in Leige, Belgium, so I would bet on that being the source of yours, too. Since this version of the company name was first used in 1905 and the export of civilian firearms from Belgium ended when the Germans invaded in 1914, that would make your gun right around 100 years old.
Where can you find a forend for an Ithaca 300 semi-auto shotgun?
Try any local gunsmith or contact the company Ithaca Gun Company, LLC 901 Route 34B Kings Ferry, NY Website Ebay. All kinds of gun parts. or go to Numrich gun parts on the web.
What is the value of an Ithaca 22 calliber single shot lever action?
According to the Blue Book of Gun Values, assuming that is in working condition and has not been altered from its factory configuration, the Model 49 Saddle Gun is valued at $40 if it retains 60% or less of the original finish and $145 in 100% original condition. Add 20% to the value for a Deluxe Model. There was also a Presentation model with a gold plated trigger and hammer, engraved receiver, and fancy walnut stocks that is valued at about 2 1/2 times the basic model and a St. Louis Bicentennial model (a deluxe model with this name inscribed) which sold for $35 new in 1964 and is now valued at $325 in 100% condition.
Where can you find the serial number on an Ithaca Shotgun?
If it is a Side by Side like my Western Long Range Gun, pop off the forearm - mine is marked in three places: the wood of the forearm, the metal of the forearm, and on the action. My Model 37 has the serial number stamped on the front of the reciever, opposite the slide for the pump. It is in the area between the magazine tube and the barrell.
What is the value of a 12 gauge model 37 Deerslayer?
The Deerslayer (not a Deluxe and without a Roman numeral suffix), in perfect 100% condition, has a book value of $300.
What is the age and value of an Ithaca model 37 16-gauge pump shotgun serial 621040?
1956.....#'s 602,000-652,000 were produced in 1956.
Where can you get a replacement sight for Ithaca model 37 rifle barrel?
Sir Go to ithacagunsusa.com and ask Nick stump, He should beable to help you. Sarge
Western Arms Company was a division of Ithaca that made inexpensive shotguns that appear identical to the Ithaca made Lefever Nitro Special from 1929 to 1946. Yours was made in 1932. Only 400 guns Western Arms Long Range Guns were produced that year, the worst of the Depression.
Single trigger versions range fro $150 to $400 in useable to excellent condition.
What is an Ithaca model 200E side by side 3 inch 20 gauge worth?
The little shot gun is worth Appx. 500 dollars You know, when you offer a price range on a gun, it should always be stated that the value also depends on how much an individual wants the piece. I would give a considerable amount more than $500.00 if I found the right model 200E in really great condition. I would hate to talk someone out of a piece because "someone" said it was only worth ????whatever? Remember to consider how much you want the piece. If it's the piece you've been looking for, be careful not to let $50.00 or $100.00 dollars stand between you and what you want. Those "little" guns are great for long walks in the field and have a rep. of being tough and dependable. I have one and wouldn't even think of letting it go for less than $900.00
Crescent manufactured shotguns from 1888 to 1940. They sold a million utility shotguns that were "branded" by hardware stores and the like.
Typical value is $85 to $150.
I'm not aware of any resource for looking up the serial numbers.
Regards, Jay Gentry Shotgunworld.com
Made between 1893 and 1930. With a more complete description I may be able to narrow that down a little, but cannot give a definite year of manufacture. Value will be less than $200 unless it is a like-new example of the early (pre-WWI) model.
Hibbard, Spencer, Bartlett & Co, Chicago (1882-1962), retailed the Victor shotguns which were manufactured by Crescent Arms, Norwich, CT (1893-1930). Can't determine the date any closer than that, but if it has fluid steel barrels it was made sometime after 1900. Value will be in the range of $75 or less.
What is the value of a Western Arms Branch Ithaca Gun Co shotgun?
A 20 guage double in useable condition should be worth $150-$250. +++ I just gave $300 for a pretty nice 12ga double "Long Range Gun" - not "new in box", just enough wear and tear to add character. See also article in "Guns and Ammo" Dec 2004 issue. +++
Your shotgun would have been manufactured in Liege, Belgium, by Anciens Etablissment Pieper and sold by A. Baldwin & Co, New Orleans, about 1893-1914.
I would not fire a damascus-barreled gun without having it checked and approved by a competent gunsmith (NOT the guy with a key to the gun case at WalMart!). It is possible that a gun of this age would have been proofed for smokeless powder and have 2 3/4" chambers, but it is more likely to be made for 2 1/2" black powder shells. Of course, you can have barrels custom-made, but why would you want to spend a couple thousand dollars on a gun worth $200 or less?
AnswerJust about every state requires perspective hunters to attend firearm safety training of some sort before a hunting permit is to be issued. In these courses the safety of firing damascus barreled shotguns is often a part of the presentation by the course instructor complete with examples of delaminated barrels. Having seen such things I can only tell you that if you really feel a need to fire one of these old timers your best bet will be to wire it to a tree, tie a string to the trigger, and pay that string out as far as you can befire pulling it. DO NOT, take any chance whatsoever or you just may end up blind!I DO NOT recommend that you fire this weapon.Your Baldwin & Co 12ga shotgun is not designed to use the moder powder types/charges used in 12GA rounds,modern shells will cause the barrel to expand,this weapon would be more valuable as a collectors item because of its age,,I have a Mears Arms Co. 12ga double barrel with belgium Damascus/Laminated barrels made in 1938.I reload my own shells so I am able to change the powder type from Pyrodex to black powder and change the charge so as to not stress the barrels...you can do this as well,but i would not recomend it for your model unless you speak with a licensed gun smith..
about $100 if with hammers and $200 if a hammerless model
You should be able to find your gun listed in The Blue Book of Gun Values, The Standard Catalog of Firearms, or Gun Trader's Guide. Your local library should have a copy, or you can just browse through one at Barnes & Noble. I imagine the value of your shotgun would depend entirely on an independent appraisal to determine NRA grade. Look near the serial number stamping on the barrel-side surface of the forearm - is there an "F" stamped nearby? If so, I believe you have an Ithaca Flues-model double like mine, manufactured around 1910 and originally selling for about $37 (1910 dollars). I've never had mine appraised but would not sell it anyway, just because it's a hoot to shoot and stays tight with their automatic play-in-the-action-takeup thingamabob. It wouldn't be worth quite as much as the Ithaca New Model doubles that followed the Flues but should be in the ballpark, and there are a lot more New Models out there for reference. As long as you have the serial number, I should mention that information on individual guns was available from Ithaca, but that was back in 1971. Good luck, and if you keep it, good hunting! Here's something I just found that might help you - this gun may be similar to yours: http://www.dixiegunworks.com/product_info.php?cPath=21_24_66&products_id=622
According to my copy ofStandard Catalog of Firearms, it should be worth $250 if in NRA Very Good condition.
Who made a 16 gauge Eastern Arms shotgun and when?
Eastern Arms was a trade name of Sears Roebuck. From about 1905 - 1915 it would probably have been made by Meriden Firearms, a company owned by Sears. Later guns were probably made by J. Stevens Arms. But since the low bid got the contract, some were made by Crescent, Iver Johnson, and others.
Sears sold guns under the Eastern Arms name after WWII as well. Eastern Arms guns made by Stevens were marked 101.7. Any guns sold by Sears that were made by Marlin were marked 103.xx with numbers after the decimal indicating a specific model.
How much is a hanover arms double barrel shotgun worth?
Hanover Arms was a trade name distributed by H&D Folsom. Actual manufacturer was probably either Crescent Arms or one of several Belgian firms. Date would be the very late 1800s to around 1930. Value will depend on it's condition but in "average" functioning condition around $150.
No one can tell you if a gun is safe to use over the internet. If the firing pin is the only thing needing repair, any competent gunsmith should be able to fix it for less than $50 I'd guess. He should also be able to tell you if the gun appears to be safe and what ammunition is suitable. Since you said firing "pin" and not "pins" I will guess that you have a single shot, so the top value would be about $75. If this particular gun has a sentimental value, you may wish to have it repaired, but if you just want a useable single barrel shotgun, your 'smith might take yours in trade as a parts gun for a newer utility gun at about the same difference as repairing yours.
What are facts about Utica Firearms Co shotguns?
Utica Firearms Company guns were manufactured by Crescent Arms, Norwich, Ct, for the Simmons Hardware Company of St. Louis, Missouri c. 1900-1920. If functional, it should be worth about $150. If not useable, but looks good over the fireplace, it is worth about the same as a decorator.
What is the value of a 20 gauge Ithaca shotgun?
It depends.But if it is a model XL 900, probably $500.If it has neve been fired around$600
AnswerDepends on age, condition, choke, stock, and what a shooter likes. In my opinion, the bottom eject, solid steel receiver the Ithaca is the best pump shotgun available. It is light, strong, smooth and made in the USA.I have heard that for every ten 12 gauge guns, Ithaca made one 20 gauge. The 16 gauge was popular, was discontinued, and is back now.
One drawback is that the newer guns lack some of the appeal of the older models in finish and stock design, but that's opinion talking. The newest guns rival the older ones in bluing and stock quality.
The newer guns have screw-in chokes, a plus, and the older ones may need factory-fitted barrels. Depending on all that, $150-$400. They're good guns.
AnswerNot enough info provided. What model is it? AnswerI bought my 20 gauge featherweight about 15 yrs ago new for 400.00, added a recoil pad, swivles and strap. I would be curious too at the value of it today but would never sell it....love that gun! New AnswerIf it is the Featherweight, it is still probably worth about $350 - $400. The Ultrafeatherweight (4 3/4 pounds) is bringing more like $500+What is the value of an Ithaca 16 gauge shotgun?
Depends on what it is and condition(Pump action 1970-1980 around $300 +/-) Breech Loaders 1960-1975 $150 - $300 Auto loader 1950- 1980 $300-$500 maybe higher depends on specifics of Gun
What is the value of a Ithaca Gun Co shotgun?
There are just too many variables to Ithaca shotguns to be able to give you a estimated value. If you go to the shotgun message board at Antique Guns you can find some true Ithaca experts. Be prepared to tell them EVERYTHING that is marked on the gun and WHERE it is marked. You will need to remove the forestock and barrels to find marks on the flats of the receiver and bottom of the barrel. Also, give the condition as a percent of ORIGINAL finish remaining, and either fully describe the engraving or give a link to photos.
What is the value of a Nitro Special 12 gauge?
John - The Nitro Special name was used by J. Stevens Arms & Tool Co. You didn't tell us what kind of a shotgun it is, but I suspect it is a break-open breech single shot or double barrel. It may have side-hammers, or a boxlock with rear hammers or a hammerless boxlock and the barrel(s) may be either laminated or fluid steel. All those things and the condition of the gun will affect the value. It MIGHT be worth $250 if it is a good to very good boxlock with fluid steel barrels or less than $10 for any variation in broken/worn out/rusted condition.
What is the value of an Ithaca Featherweight 12ga?
Google "Ithaca Featherweight". You'll see them for sale ranging from $150 in good condition to $300 and up in excellent condition. You would never get mine, I wouldn't sell it - my favorite shotgun. I would want about$250 for mine, if it were for sale. But it's not. I shot quail and pheasant in south Georgia with my Dad when I was 12 years old. I believe the place was called Pulaski Game Reserve. Anyway, we filled the bag and rode back to Atlanta. The gun has been cleaned after each use, and you can still barely see the etched hunting scene on the side of the breech. The action is still smooth, and I am popular in the duck blind, since the bottom eject doesn't throw hulls at my friends. Alan According to the blue book it's $125-$250.
Why would a shotgun not eject the fired shell?
Mary Ann, I assume the shotgun you are refering to is a of the semi-auto flavor. If so your problem could be anything from just needing a good cleanig, to a pitted chamber or ammo that is to low powered. You could try detail stripping the gun for a serious cleaning or if this is beyond your skill level I would recommend taking it to a good gunsmith or armorer.
Dave
Mike, it is possible that you have a broken or missing extractor.
Dave
Mary Ann - Check the yellow pages for a gunsmith. He can tell you what parts you need and get them.
I have the same problem with my Remington 870 lefty. Although, my shells wouldn't eject when the gun was brand new and out of the box. When my barrel was machined at the factory, grooves were left in the first inch of the chamber. When the shell was fired the brass casing would expand and grab onto these grooves. I would tug so hard on the pump handle to eject the fired shell that ejector pin would rip the rim off of it.
An entire afternoon with 220 grit sand paper will fix the problem.
What is history on the C Parker damascus double barrel shotgun?
C. Parker & Co shotguns were imported by H&D Folsom, New York, around 1900. There were millions of similar shotguns under hundreds of different names and you are right, most collectors refer to them as JABC's (Just Another Belgian Clunker). The manufacturer, importer, and retailer each made a profit and the government collected a 65% import tarrif on these guns which sold for less than 10 dollars, so you can guess that they were not high quality. A few people still shoot these old guns, but they hand-load the appropriate black powder shells. They are also bought by yuppies wanting something to hang over their mantle. And many are priceless family heirlooms.
AnswerWould these guns still be useful to fire blank powder blank loads through them?? Being an old west re-enactor a side by side with hammers is a good find at the usual $125.00 you have priced before. I am not talking super loads, But running about 60 gr of 4f black powder through a 12 g. I understand the barerls should be checked by a gunsmith for damage prior to shooting, but if the barrels are found to be clean, would this be a hazard with a nearly 100 year old gun??
AnswerLots of CAS and re-enactors use the old guns with their own black powder handloads. If you find one in good condition and it gets your gunsmith's blessing, I'd say it would be fine to use it. Problem is, many of these old guns had hard use and/or poor maintenance over the last century. Those with twist or damascus barrels may have internal rust that will not be apparent on a visual examination. You may buy 3 or 4 $125 guns and pay the 'smith $50 or more to check them each out before you find one that is really a shooter.
Who made Eastern Arms shotguns?
Eastern Arms was a Sears Roebuck trade name. Manufacturers included Meriden Firearms, Iver Johnson A&C, Stevens/Savage Arms, and Crescent Firearms.
