John Deere

The serial number you provided, "moo111s302374," indicates that the John Deere 111 was manufactured in 1985. John Deere typically uses a coding system where the first few characters represent the model and the following numbers indicate the production sequence. In this case, "s302374" suggests it was built in that specific year.

For a John Deere 4410, a snow blower in the range of 47 to 54 inches is typically recommended. Make sure to choose a model that is compatible with the tractor's PTO and hydraulic system. Additionally, consider the typical snowfall amounts in your area to select an appropriate size for effective snow removal. Always refer to the owner's manual for specific compatibility and performance guidelines.

To determine the year of a John Deere 757 track mower with a specific serial number starting with "OTC," you would typically need to refer to John Deere's serial number lookup resources or contact a John Deere dealer. Serial numbers often contain information about the production year and model, but without the full serial number, it's not possible to pinpoint the exact year. Generally, John Deere equipment has a standard method for decoding the year from the serial number.

Yes, the gas cap on a John Deere SRX75 riding mower is vented. This venting allows air to enter the fuel tank as fuel is consumed, preventing a vacuum from forming that could hinder fuel flow. It's important to ensure that the vent is clean and functioning properly for optimal performance. If you suspect issues with the gas cap, consider checking it for clogs or damage.

The TD9 International dozer, equipped with a blade, typically weighs around 10,000 to 11,000 pounds (approximately 4,500 to 5,000 kilograms). This weight can vary slightly depending on the specific configuration and attachments of the machine. The TD9 is designed for efficient earthmoving and grading tasks, making it a versatile choice for construction and agricultural applications.

Yes, no ethanol gas is generally better for John Deere mowers. Ethanol can attract moisture and lead to fuel degradation, which can cause issues like clogged fuel lines and carburetors. Using no ethanol gas helps maintain engine performance and longevity by reducing these risks and ensuring cleaner combustion. Overall, it can lead to better reliability and less maintenance over time.

To fix the steering on your John Deere SST16, first inspect the steering components for any visible damage or wear, including the steering wheel, gear, and linkages. Ensure that bolts and connections are tight and that there is no debris obstructing movement. If the issue persists, consider adjusting the steering linkage or replacing worn parts. For specific repairs, consulting the owner’s manual or a professional mechanic may provide further guidance.

To calibrate the steering value on a John Deere 3010, first ensure the tractor is on a level surface with the steering wheel centered. Then, use the appropriate diagnostic tool or software to access the steering calibration settings. Follow the on-screen prompts to adjust the steering parameters, ensuring that the system recognizes the center position and any required end stops. Finally, test the steering to verify that it responds accurately before finalizing the calibration.

The serial number on a John Deere 4960 tractor is typically located on the left side of the tractor frame, just above the left rear axle. It can also be found on a metal tag attached to the engine block. For precise identification, refer to the owner's manual or check with a John Deere dealer.

To find a diagram or instructions for putting on a belt on a John Deere LT 190 riding mower, you can check the owner's manual, which often includes detailed diagrams. Alternatively, visit the John Deere website or search for repair manuals and instructional videos on platforms like YouTube. Many gardening or lawn care forums may also provide valuable resources and user experiences.

To add oil to the transmission of a John Deere L120, first ensure the mower is on a level surface and the engine is off. Locate the transmission dipstick or fill cap, usually found near the rear of the mower. Remove it, then use a funnel to add the appropriate type of transmission fluid until it reaches the recommended level on the dipstick. Finally, replace the dipstick or fill cap securely before starting the mower.

The John Deere 1130SE gas tank is vented through a vented fuel cap, which allows air to enter the tank as fuel is consumed. This venting prevents a vacuum from forming inside the tank, ensuring a steady flow of fuel to the engine. Proper venting is essential for optimal engine performance and to avoid fuel flow issues. Always ensure the vent is clear and functioning to maintain efficiency.

The Petro-Canada equivalent to John Deere Hy-Gard J20C fluid is Petro-Canada's "Hydraulic Fluid 32" or "Hydraulic Fluid 46," depending on the specific viscosity required. These hydraulic fluids are designed for use in agricultural and construction equipment, providing excellent lubrication and protection against wear. Always check equipment specifications to ensure compatibility with the intended application.

A John Deere 4050 tractor typically holds around 3 to 4 pounds of R-134a refrigerant (freon) in its air conditioning system. However, it's essential to consult the owner's manual or service guide for the specific model, as the amount can vary slightly based on the configuration and any modifications made. Always ensure proper handling and recovery of refrigerants when servicing the AC system.

Yes, Hy-Gard can be used in a Bobcat 751. Hy-Gard is a hydraulic and transmission fluid that meets the specifications required for Bobcat equipment. Always consult the Bobcat 751 owner's manual for specific fluid recommendations and capacities to ensure optimal performance and longevity of your machine.

To add oil in a John Deere 5200 tractor, locate the engine oil fill cap, which is typically found on the top of the engine. Remove the cap, and use a funnel to pour in the appropriate type and amount of oil as specified in the owner's manual. Always check the oil level with the dipstick to ensure it's within the recommended range. After adding oil, securely replace the fill cap before starting the tractor.

In Coin Dozer, players drop coins into a virtual machine to push other coins and prizes off the edge of a platform. To play, simply tap the screen to release a coin, aiming to strategically position it for maximum effect. Collect prizes and tokens as they fall, and use special items to enhance gameplay. The goal is to accumulate as many coins and rewards as possible while managing your limited coin supply.

To remove the mower deck from a John Deere 210, first ensure the engine is off and the key is removed. Next, raise the deck to its highest position, then disconnect the mower deck lift links and remove the belt from the engine pulley. Finally, detach any remaining connections, such as the anti-sway brackets, and carefully slide the deck out from under the tractor. Always consult the owner's manual for specific instructions related to your model.

The John Deere 5320 typically holds about 11.5 gallons (approximately 43.5 liters) of hydraulic fluid. However, it's essential to check the operator's manual for the most accurate specifications, as fluid capacity can vary based on specific configurations or attachments. Regular maintenance and monitoring of fluid levels are crucial for optimal performance.

To release the hydrostatic drive on a John Deere LX188, locate the hydrostatic release lever, which is typically found near the rear of the mower, near the transmission. Pull the lever outward or push it down to disengage the hydrostatic drive, allowing the mower to roll freely. Make sure to return the lever to its original position before operating the mower again to ensure normal driving functionality. Always refer to the operator's manual for specific instructions related to your model.

To remove the rear axle from a John Deere Gator, first lift the vehicle and secure it on jack stands for safety. Next, disconnect the rear wheels and any associated brake components, then remove the bolts securing the axle housing to the frame. Finally, slide the axle out of the housing, ensuring you support any additional components that may be connected. Always consult the specific service manual for your Gator model for detailed instructions and safety precautions.

The John Deere GT235 typically uses a 12-volt lead-acid battery. The recommended specifications are usually around 300-350 cold cranking amps (CCA) to ensure reliable starting in various conditions. It's important to check the owner's manual for the exact battery size and specifications for your specific model, as variations may exist. Always ensure proper installation and maintenance for optimal performance.

To unlock the steering on a John Deere LT 150 lawn tractor, first ensure the ignition is off and the key is removed. Locate the steering column and check for a locking mechanism, often a lever or pin that needs to be disengaged. If the steering is still locked, you may need to gently wiggle the steering wheel while attempting to unlock it. Once disengaged, the steering should operate normally.

To change the vane on a John Deere JS20, first ensure the mower is turned off and disconnected from the power source. Remove the screws or fasteners securing the cover or housing to access the vane assembly. Carefully detach the old vane and replace it with the new one, making sure it is properly aligned. Finally, reassemble the cover and securely fasten it before reconnecting the power and testing the mower.

The torque specifications for a John Deere exhaust manifold can vary depending on the specific model and engine type. Generally, the torque for exhaust manifold bolts ranges from 25 to 35 foot-pounds. It's essential to refer to the specific service manual for your John Deere model for the exact specifications and proper tightening sequence. Always ensure to follow manufacturer guidelines for optimal performance and to prevent damage.