0
Metric System
The metric system is an international basis of measurement based on a decimal system. It uses standard base units to name larger and smaller units.
2,771 Questions
It is 0.891 cubic centimeters [cc], and 1 cc equals a milliliter [mL]. So it is 0.891 mL.
1 cc equals 1 cm X 1 cm X 1 cm = 10 mm X 10 mm X 10 mm = 1000 mm3. To give some scale to this, there are 5 mL in 1 teaspoon; it is a little more than 1/6 of a teaspoon.
When you convert 1 daL to dL, the result is 100 dL. The abbreviation daL stands for dekaliter, and dL stands for deciliter.
What metric prefix is between deka and kilo?
Dekameter, one dekameter is equal to 100 meters.
Deca is the prefix for 10, one decametre is ten metres, one decalitre is ten litres. Having lived for over forty years in a metric country I have never seen it used in real life. Similarly deci for a tenth, and hecto for one hundred are never used. Centi for one hundredth is only used for centimetres, except for some wine bottles which use centilitres.
What describes the metric system units used in scientific data?
Currently it is the international system of units, or SI (from the French name).
There are numerous things used to define the units, such as a second being defined from the period of radiation between 2 hyperfine levels of a caesium isotope, and the meter being based off a second the speed of light.
How meany meters are in 6 foot 1 inch?
1.8542 m ;
1 foot = 30.48 cm, and 1 inch = 2.54 cm {these are good ones to have memorized}
So: 6 x (30.48 cm) + 1 x (2.54 cm) = 182.88 cm + 2.54 cm = 185.42 cm, then divide by 100 (cm/m) to get meters: 1.8542 m
Or the other way would be to convert 6'1" to 73 inches, then (73 in) x (2.54 cm/in) = 185.42 cm
Of course top answer is good too.1.825 without a calculator. It would be 6 1/12 / 3.2808399 which I actually cheated and used a calculator is 1.85. Also 1 in = 2.54 cm, 1 ft = 12 in, 1 m = 100cm. Easier to figure out that way. 2.54 x 12 x 6 + 2.54 = 185 ish / 100 = 1.85 rounded. My initial calculation without a calculator was with 2.5 instead of 2.54.
A hectare is a hundred metres times a hundred metres in measurement
So 100 x 100 = 10,000 square metres
How do you measure the thickness of a pencil lead?
To measure the thickness of a pencil lead, you can use a micrometer or caliper tool, which can provide a precise measurement in millimeters. Simply place the pencil lead between the jaws of the tool and gently close it to obtain the measurement.
What is the bass unit of mass in the metric system and what is it represented by?
Gram is bass unit
Tone = T
Kilogram = KG
Gram = G
milligram = mG
Basic Metric system
10^12 - Tera
10^9 - Giga
10^6 - Mega
10^3 - Kilo
10 - Unit
10^-1 - deci
10^-2 - centi
10^-3 - milli
10^-6 - micro
10^-9 - nano
10^-12 - pico
121 centimeters = about 47.6 inches. (47.6377953 inches)
How much does the average man weigh in metric units?
It really depends how tall he is. A man who is 1.78 metres tall should weigh around 80 kilograms.
What is the least accurate system for measuring medicine?
The least accurate system for measuring medicine is likely the household teaspoon or tablespoon. These are not standardized units of measurement, leading to variation in dosage. It is more reliable to use a calibrated measuring spoon or a syringe provided with the medication.
How many revolutions to roll a penny a kilometer?
A UK one pence coin has a diameter of 20.00m millimetres, which means its circumference will be 62.83 millimetres. So it takes 15.92 revolutions to cover one metre.
1 000mm/62.83mm
To cover one kilometre it will take 15.92 X 1 000 = 15 916 revolutions (15.92 was a rounded figure)
By unit of length and distance and conversion ,we can say that
1 ft = 0.3048 m
6 ft=1.828 m
No, as long as it does not last over 48 hours any fever between 39 and 39.4 is manageable at home. Above that is too high and you should call either a nurses advice line (here in Sweden it is 1177) or your doctor. If it lasts over 48 hours you need to see a doctor at once.
Can you use an axod metric in place of ax4d?
It is not recommended to replace an ax4d metric with an axod metric. Each metric has its own specific purpose and characteristics, and using the correct metric is important for accurate analysis and measurements in the given context. Make sure to use the appropriate metric for the particular application or analysis to ensure valid results.
What is the ratio of CGS unit to SI unit of energy?
The ratio of CGS unit to SI unit of energy is 1 CGS unit to 10^7 SI units. This means that 1 erg in CGS units is equivalent to 10^-7 joules in SI units when measuring energy.
What metric unit is used to find distance between towns?
The best unit of measurement for the measuring the distance between two towns would be miles. You could also use kilometers if you want, but anything smaller than miles or kilometers would make getting the correct measurement difficult.
What is one click in distance?
One click refers to a unit of measurement used in military jargon to indicate the distance of one kilometer, or approximately 0.62 miles. It is commonly used for quick and easy communication of distances during operations.
A tonne is metric, Ton is imperial.
One tonne is 1 000 kilograms.
There are two different "tons", in North America a ton is 907 kilograms, in the UK a ton is 1 016 kilograms.
This is why SI is always better, a tonne is the same wherever you are.
