0
Metric System
The metric system is an international basis of measurement based on a decimal system. It uses standard base units to name larger and smaller units.
2,771 Questions
How much does the average man weigh in metric units?
It really depends how tall he is. A man who is 1.78 metres tall should weigh around 80 kilograms.
What is the least accurate system for measuring medicine?
The least accurate system for measuring medicine is likely the household teaspoon or tablespoon. These are not standardized units of measurement, leading to variation in dosage. It is more reliable to use a calibrated measuring spoon or a syringe provided with the medication.
How many revolutions to roll a penny a kilometer?
A UK one pence coin has a diameter of 20.00m millimetres, which means its circumference will be 62.83 millimetres. So it takes 15.92 revolutions to cover one metre.
1 000mm/62.83mm
To cover one kilometre it will take 15.92 X 1 000 = 15 916 revolutions (15.92 was a rounded figure)
By unit of length and distance and conversion ,we can say that
1 ft = 0.3048 m
6 ft=1.828 m
No, as long as it does not last over 48 hours any fever between 39 and 39.4 is manageable at home. Above that is too high and you should call either a nurses advice line (here in Sweden it is 1177) or your doctor. If it lasts over 48 hours you need to see a doctor at once.
Can you use an axod metric in place of ax4d?
It is not recommended to replace an ax4d metric with an axod metric. Each metric has its own specific purpose and characteristics, and using the correct metric is important for accurate analysis and measurements in the given context. Make sure to use the appropriate metric for the particular application or analysis to ensure valid results.
What is the ratio of CGS unit to SI unit of energy?
The ratio of CGS unit to SI unit of energy is 1 CGS unit to 10^7 SI units. This means that 1 erg in CGS units is equivalent to 10^-7 joules in SI units when measuring energy.
What metric unit is used to find distance between towns?
The best unit of measurement for the measuring the distance between two towns would be miles. You could also use kilometers if you want, but anything smaller than miles or kilometers would make getting the correct measurement difficult.
What is one click in distance?
One click refers to a unit of measurement used in military jargon to indicate the distance of one kilometer, or approximately 0.62 miles. It is commonly used for quick and easy communication of distances during operations.
A tonne is metric, Ton is imperial.
One tonne is 1 000 kilograms.
There are two different "tons", in North America a ton is 907 kilograms, in the UK a ton is 1 016 kilograms.
This is why SI is always better, a tonne is the same wherever you are.
What measurement system often uses body parts for a substitute of measurements?
The cubit was the first documented record of a specified length, and was the length of an average forearm of a person. Joints of fingers gave "inch" its standard length, and the height of horses is still measured in "hands."
Measurement of lengths and heights arose from body parts, as these were standard things that people carried around with them. No set "system" in particular exists for the use of these standards, but many standards we have today were derived from them.
Which metric unit would most likely be to measure the medicine in a pill?
grams, milligrams, kilograms, all the gram things
You move it to the left. As the unit gets larger, the base number gets smaller. One gram would be .001 kilograms. A kilogram is much larger than a gram, so the base number would be smaller to make up for being represented by a larger unit.
What is bigger a 1.42 liter bottle or a 710 milliliter bottle?
One millilitre is 0.001 litre. So 710 millilitre is 0.710 litre. so a 1.42 litre bottle is bigger than a 0.71 litre bottle.
How do igrp and eigrp differ in their metric calculation?
IGRP uses a single composite metric based on bandwidth and delay, while EIGRP uses a composite metric including bandwidth, delay, reliability, load, and MTU. EIGRP also allows for variance in metric calculation to enable load balancing across unequal path costs.
What is the practical si unit of force?
In the SI, force is measured in newtons. For very large or very small forces, it is of course possible to use the standard SI prefixes, but quite often, the unit used is simply the Newton, without any prefixes.
Does Italy have a metric system?
Yes, Italy uses the metric system for measurements like distance (kilometers), weight (kilograms), and volume (liters). The metric system is widely used throughout Italy for consistency and ease of communication.
Similarities: converting between any two units (of the same dimension) simply requires a conversion factor. Example:
- 1 inch = 2.54 centimeters
- 1 meter = 100 centimeters
- 1 foot = 12 inches
To convert from inches to centimeters, simply multiply by 2.54. To convert from meters to centimeters, simply multiply by 100. Each unit has a conversion factor with centimeter. Similarly, any unit will have a conversion factor with another unit (of the same dimension).
Note that all of the units in the above example are length units. You cannot convert from volume to length, or mass to temperature, for example.
To convert the other way (from centimeters to inches), you need to divide both sides of the equation above by 2.54:
- 1/2.54 inch = 1 centimeter --> 0.39370 inch = 1 centimeter
so you can now either multiply by 0.39370 or divide by 2.54
So the main difference is that in the metric system, all of the conversion factors will be powers of ten, and you can derive what power of ten to use from the prefixes. Centi- is always 100 (a centi-something is always 1/100 of the base unit). So there are 100 centigrams in a gram, 100 centimeters in a meter, 100 centiliters in a liter.
In the customary system, you must know (or look up) the necessary conversion factor (12 inches in 1 foot, for example).
This is not a proper conversion. Cubic centimeters (cc) is a measure of volume. Grams (g), kilograms (kg) and milligrams (mg) are measures of weight or mass.
Why are there two different metric systems?
There are two main metric systems: the International System of Units (SI) and the older metric system known as the CGS system. The two systems differ in the choice of base units and their prefixes. The SI system is more modern and comprehensive, incorporating scientific advances and global standardization.
