0
Metric System
The metric system is an international basis of measurement based on a decimal system. It uses standard base units to name larger and smaller units.
2,771 Questions
In the metric system how many millimeters does it take to make a meter?
1000. Milli means 1/1000.
1000. Milli means 1/1000.
1000. Milli means 1/1000.
1000. Milli means 1/1000.
Which metric unit would you use to measure the length of the tennis court?
Meters should be used to measure the length of a tennis court in metric units.
How do you Convert 24 hours in metric system?
You don't have to.
Time is measured in the same units in both the Metric and English systems.
No, Pascal is not an SI unit. Pascal (Pa) is the SI unit of pressure, defined as one newton per square meter. It is named after Blaise Pascal, a French mathematician, physicist, and philosopher.
What is the answer to g equals 4.6 kilogram?
4.6 kg = 4600 g
To convert from kg to g, multiply by 1000.
How do you convert 1 square decimeter to 6 meters?
To convert square decimeters to square meters, you need to divide by 100 (since 1 square meter = 100 square decimeters). Therefore, 1 square decimeter is equal to ( \frac{1}{100} ) square meters. In this case, 6 square meters would be equal to 600 square decimeters.
The SI unit of the drag force?
If you consider drag as a force, that would be Newtons.
If you consider drag as a force, that would be Newtons.
If you consider drag as a force, that would be Newtons.
If you consider drag as a force, that would be Newtons.
How do the US use the metric system?
The metric system is used in many scientific fields and industries in the US, such as in laboratories, engineering, and international trade. However, the US primarily uses the Imperial system for everyday measurements like distance, weight, and volume.
What does dal in the metric system stand for?
In the metric system, "dal" stands for decaliter, which is equal to 10 liters. It is used to measure volume.
How do you measure from a known point by English and metric system?
In the English (or imperial) system, distances are measured in inches, feet, yards, or miles, depending on what kind of distance you want to measure.
In the metric system, commonly used units are millimeters, centimeters, meters, kilometers - again, depending on how long the distance is, you would usually choose a shorter or a larger unit.
Ton is a weight and bar is a pressure. There is no conversion between the two.
What is the SI Unit for Frequency of light?
The SI unit for frequency of light is the hertz (Hz). It represents the number of cycles (or oscillations) of a wave per second.
What is the SI unit of energy please explain?
The SI unit of energy is the joule (J). One joule is equal to the work done by a force of one newton acting over a distance of one meter. Energy can be converted between different forms such as kinetic, potential, and thermal energy.
Why are conversions in the metric system easier than the US system of measurements?
The question can be reversed to why imperial conversion is so hard. The two unit systems are just completely incompatable with each other. For instance. In metric,the meter was invented when a certain stick was used to measure things and people started replicating this stick. This was the meter stick. Similarly,the foot was invented by taking the average length of a adult foot for measurement. Thus the two lengths only have a ratio to connect them in this case 1 : 0,3048.
What are linear measurements in the metric system based on?
Linear measurements in the metric system are based on the meter, which is the fundamental unit of length. Other units such as centimeters, millimeters, and kilometers are derived from the meter using prefixes.
Which countries use the non-metric system of measurement?
The three world leaders in international trade, commerce, and technology that have
not yet adopted the new-fangled metric system are the USA, Liberia, and Burma.
One fascinating factoid that may presage the ultimate demise of this fad is the fact
that none of these three countries has been around appreciably longer than the
metric system has.
SI unit of magnetic-induction?
Electromagnetic induction is the process of inducing electric current in a coil with the help of a magnet.
Whenever a conductor is moved through a magnetic field, or the magnetic field fluctuates in strength (as with an AC electromagnet), a current will be induced in that conductor. Induction cooktops work by passing a large AC current through a conductor under the cooktop, creating a fluctuating magnetic field which induces an electric current through the cookware - heating the cookware by electrical resistance.
The process by which a substance, such as iron or steel, becomes magnetized by a magnetic field. The induced magnetism is produced by the force of the field radiating from the poles of a magnet.
Comment
Further to the original answer, it is a voltage that is induced into a conductor, NOT a current.
The SI unit for mass is the what?
The SI unit of mass is the kilogram. However the prefixes are based on the gram.
