Percussion Instruments

there are a lot of ways to stay on time. here are some:

• Learn to count. Practicing counting and when you perform count verbally or mentally.
• Use a Metronome. Using a metronome is the best way to be in tempo. It may take time to get used to it but once you get the hang of it, it'll be very useful.
• Learn to count by heart. This sounds weird but through out my career I've personally met drummers and percussionists who count using their heart. Some say they use their heart beat as a metronome and some say they just learn to count by heart and they can sense if they are speeding up or slow down.

Even if you learn to count there will always be no "perfect beat" there are times that youll hit a bit too early or a bit too late, there are times that your volume would increase or decrease, but thats what makes it "human-like" the tiny imperfections on our beats and hits.

Music instruments, mechanisms that produce sounds, have been used for various purposes. In earlier times they were also used as an adjunct to dance or to labor. In later civilizations, instrumental music was used for entertainment. Present day musicological studies, following the Hornbostel-Sachs classification, divide instruments into the following categories: idiophones, aerophones, chordophones, and membranophones.

Idiophones

Instruments that produce sound from the substance of the instrument itself (wood or metal) are classified as idiophones. They are further subdivided into those that are struck, scraped, plucked, shaken, or rubbed. In the Philippines there are metal and wooden (principally bamboo) idiophones.

Metal idiophonse are of two categories: flat gongs and bossed gongs. Flat gongs made of bronze, brass, or iron, are found principally in the north among the Isneg, Tingguian, Kalinga, Bontok, Ibaloi, Kankanai, Gaddang, Ifugao, and Ilonggot. They are most commonly referred to as gangsa. The gongs vary in sized, the average are struck with wooden sticks, padded wooden sticks, or slapped with the palm of the hand. Gong playing among the Cordillera highlanders is an integral part of peace pact gatherings, marriages, prestige ceremonies, feasts, or rituals.

In southern Philippines, gongs have a central profusion or knot, hence the term bossed gongs. They are three of types: (1) sets of graduated gongs laid in a row called the kulintang; (2) larger, deep-rimmed gongs with sides that are turned in calledagung, and (3) gongs with narrower rims and less prominent bosses calledgandingan. These gongs may be played alone but are often combined with other instruments to form various types of ensembles.

Bamboo idiophones abound in the Philippines-xylophones, drums, quill-shaped tubes, stamping tubes, scrapers, buzzers, and clappers.

The bamboo xylophone, gabbang, is found in southern Philippines among the Yakan, Sama, Tausug, and Palawan. It consists of bamboo keys of graduated lengths mounted on a trapezoidal box. The number of keys varies among the different tribes, ranging from 3 to 22. In northern Luzon, among the Kalinga, individual xylophone-like blades called patatag are struck with bamboo sticks.

The bamboo slit drum, such as the Bukidnon bantula is fashioned out of a bamboo tube closed at both ends with anode with a slit cut out of the tube. Found among different groups of people, its main use is to announce important events.

The struck quill-shaped bamboo tubes with notches etched on the tube, are found only in southern Philippines such as the Maranao tagutok and the Maguindanaokagul. The player scrapes the notches with a bamboo stick.

Among the Cordillera highlanders, bamboo buzzers are widespread. They are made from a length of bamboo closed with a node at the bottom, with its top half shaped so that two tongues face each other. The top half is struck against the palm of the hand. They are known by different names such asbalingbing, pew-pew,pakkung, bilbil, bungkaka by the various groups.

The Ifugao have a bamboo clapper, hanger, fashioned from a tubular section of bamboo, split from one end to approximately half of the tube. Each half of the split portion is shaped to make it narrower in the middle, thus making it more flexible when the halves are made to flap against each other.

Wooden idiophones include sticks, suspended logs, and log drums. The Hanunuokalutangconsists of pair of sticks cut from forest trees. These are struck against each other and played while hiking through forest and mountain trails.

The Ifugao pattung is a percussion yoke bar made from a tapered piece of wood and struck with a stick. It is used in a ceremonies for the sick, at rites which entail the offering of sacrificial pigs, or at death rituals.

Suspended logs are widespread in southern Philippines where they are known by different tribes. The Maguindanao luntang consists of several logs of varying lengths hung in order from longest to shortest. The pointed playing ends of each log is struck by one performer creating a melody against which another performer beats drone rhythm on one of the logs.

The Tagakaolo edel is a sounding board with resonator played during wedding celebrations together with a drum or gong to accompany dancers. The Bagobo and Bilaan have similar drums.

Jews harps are bound all over the Philippines. They are principally made from bamboo although in Philippines some are made of metal. It is a type of mouth resonated instrument consisting of a flexible tongue fixed at one end to a surrounding frame. The player places the free end of the instrument with the hand, or in some other types by pulling a string attached to the blade. The instruments have different manes among the various tribes. In the south the most common term is kubing, in the northulibaw.

Aerophones

Philippine bamboo aerophones include various types of flutes, pan-pipes, and reed pipes. The most widespread and numerous are the flutes which are mostly end-blown with the air stream directed into the open end of the tube.

The lip valley notch flute, so called because of its mouthpiece which is obliquely cut and curved at a slant to follow the contour of the player's lips, is found in northernand southern Philippines. They are known by different names among the different linguistic groups, such as the paldong in the south and thepalendagin the north. They are instruments of leisure, used for serenading, courting, or merely to pass the time away.

The nose flute, another type of end-blown flute, is found mostly in northernPhilippines where the Kalinga call it tongali, the Bontok kaleleng, and the Ifugaoungiung. It is found sporadically in some areas of the south among the Hanunuo(lantuy), the Batak (lantoy), and the Bukidnon (bulaktob). The Cuyunin of Palawan have gigantic nose flutes with tubes much larger in diameter than those found in Luzon.

Less common flutes are the ring type called suling in southern Philippines; the whistle type calledthumpong(Subanun); and the reed called saunay (Tausug).

Stopped pipes found in northern Philippines are the saggeypo (Kalinga) and thesagay-op(Bontok). The bamboo pipe is closed on one end by a node with the open end held against the lower lip of the player as he blows directly across the top. The pipe can be played individually by one person or in ensembles of three or more.

Rarely used today is the bamboo panpipes called diwas, diwdiwas, or dew-dew. These consist of a number of bamboo pipes (5-8)strung together.

Most Philippine transverse flutes are adaptations or imitation of European versions evident in the borrowed names such as flauta (Ilonggo, Sebuano, Bicol); plawta(Manobo) and palawta (Hanunuo, Waray). The Cuyunin use a transverse flute calledtipanuwhich is also found among the Batak of Palawan.

Other blown instruments are those made from shell or carabao horn. These are used for calling people or sending messages over wide distances. Shell trumpets include the budyong, lungga, taburi. Carabao horns are the tambuli (Tagalog) andkogao(Ifugao).

Chordophones

These are bamboo or wood stringed instruments that may be struck, plucked, or bowed. They included zithers, lutes, and bowed strings.

Philippine zithers have resonating bodies that are made from bamboo tubes or half tubes with strings that run parallel to the length of the tube. Tube zithers are found in northern Luzon, Mindanao, and Palawan. They are of two types: polychordal zithers with several strings that run around the tube, and parallel stringed zithers which have two strings on one side of the tube.

Polychordal tube zithers found in the Cordilleras, Mindanao and Palawan have strings that are etched out of the bamboo body, remaining attached at both ends. Small wooden frets are inserted beneath the string near the ends. The number of strings varies from 5 to 8 or 9 and occasionally even 11. Some names by which this zither is called are:kolitong, kollessing, kulibet, saluray, sigitan, takul, tangke, togo, and pagang.

northern Luzon, Mindoro, Mindanao, and Palawan where they are known by such names as tambi,bamban, tabengbeng, kudling, tabobo,thambabok, takumbo, and patigunggung.

Lutes are found only in the south, in Mindanao and Palawan. They are of the long neck variety, with two stings that run from the neck to the base of the resonating chamber. One sting plays a drone, the other a melody. Though all the lutes are fretted, the location and number of frets vary between groups. The frets of the Maranao and Maguindanao kudyapi are glued to the body of the resonating chamber, while the frets of the Bilaanfuglung, the Mansaka and Mandaya kudlong and the Palawan kusyapiare located on the neck of the instrument.

One stringed bowed lutes (fiddles) of the long neck variety are found in Mindanao. They have a sounding box made from a coconut half shell covered with a leaf, or a piece of bark or animal skin. The string is make of abaca fibers, horse hair, and more recently, wire. In is called duwagey by the Manobo and Bilaan.

The rondalla ensemble consists of plucked string instruments: thebandurria, the laud, the octavina, the six stringed gitara and the bajo de unas or bass guitar.

In the parallel stringed tube zithers, two bamboo strands, about 5 cm. apart, are etched out to the tube to serve as strings. At mid-point of the tube, below the strings, a small sound hole is bored and covered by a small bamboo plate clipped to the strings. When played, the strings are struck by a bamboo stick or plucked. The instrument, with slight variations, is found in

In the later period of the Spanish regime, a favorite string ensemble calledcumparsaemerged. It was anadaptation of similar instrumental groups in Mexico (murzaor murga) and Spain (estudiantina). During the early years of the American regime, the cumparsa was superceded by the rondalla.

The bandurria is pear shaped, with a rounded back, a round sound hole and a fretted neck. It serves as the melody instrument of the ensemble. The octavina andbandurriaare tuned an octave below the laud. They furnish the inner harmonies and contrapuntal elaboration to the melody. The gitara's main function is to supply the arpeggiated or chordal underpinnings of the ensemble. The bajo de unas is tuned like the contra-bass.

Membranophones

Single and double headed drums are found throughout the Philippines. They are variously shaped--conical, cylindrical, goblet shaped, barrel shaped. Animal skins (snake, deer, or goat) is used as head/heads of the drum. They may be beaten with sticks or by the palm portion of bare hands. Drums are seldom used alone except to announce tidings over long distances. Usually they are played with other instruments, particularly gongs, to form different kinds of ensembles.

The sulibao and kimbal of the Bontok and Ibaloi are longitudinal slightly barrel shaped hollowed out logs with deer skin heads on one end. The taller drum (ca. 80 cm) is called the kimbal; the shorter (ca. 75 cm) is called the sulibaw. The drum dead is small measuring about 6 cm. in diameter. They are played with palms of two hands. The drums are combined with gongs and other instruments to form different types of ensembles.

The Ifugao libbit, ludag is a conical drum with a deer or goat skin head. It is played with a gong during harvest time under the rice granary.

The dabakan is a large goblet shaped drum used by the Maranao and Maguindanao in their kulintang ensembles.

The forgoing listing of Philippine musical instruments has been based primarily on holding of the archives at the U.P. Center for Ethnomusicology.

Pictures can be found at Palawan's musical instruments (copy into address bar).

The answer to this question is slightly different if it is aimed at naming the group or naming music for the group.

In general, chamber groups of instruments have a term indicating the number of players, starting with solo (one instrument), duet (two), trio (three). From four instruments up, the ensemble can be called by latin number roots with '-et' suffix:

Quartet (4)

Quintet (5)

Sextet (6)

Septet (7)

Octet (8)

Nonet (9)

etc.

The next in line would be 'Dectet' for 10 instrumentalists. 11 would be 'UnDectet', essentially read as 'one-and-ten'.

If the number 10 refers to the actual number of instruments, and they can be managed by fewer players, Dectet would not work as well. Depending on the percussion instruments and their employment, they can be managed by as few as one player! In such a case, there's little reason to name the grouping anything beyond "percussion instruments", or "10 percussion instruments", and the group playing them can be named for the quantity of instrumentalists.

Another possibility, never to be overlooked (especially if you are the typesetter and are paid by the character) is to name the instrumentation explicitly. This will help to differentiate your group, overcome confusion over whether to number the instruments or musicians, and will help the stage manager to be sure that all the required instruments make it to the stage. In such a case, similar instruments can be grouped, but similar instruments with slight, but important differences must be spelled out:

Cassation for Snare Drum, Tenor Drum, Bass Drum, Crash and Ride cymbals, Guerrero, Claves, Cajone, Chimes and Orchestra Bells

probably is more helpful than

Cassation for drums, cymbals, bells and hand-percussion

or

Really loud Cassation

although the last might be the sort of name that catches on.

Past about 8 players, the term "ensemble" becomes a reasonable title, so "Percussion Ensemble" covers a multitude of groups and groupings, without being picayune. In such a case, identifying modifiers can be added to differentiate your Percussion Ensemble from their Percussion Ensemble, and in many cases, reference to the instrumentation can be dispensed with entirely for some other naming, such as a name associating them with location, period, or sponsor. No one really worries about how many boys sing in the Brooklyn Boys Choir.

Naming pieces can use the Latinate numbering (Piece for Percussion Dectet), but there are other approaches that can be used.

The European early-music numbering system for ensembles is still in use, as well, generally using the French 'á' followed by a number, in your case, á 10 as in "Piece for Percussion á 10".

For titles of music, often a name more descriptive of the music itself, whether based on form, metaphore, simile, or reference is appropriate i.e., Suite, Ponderance, Battery, or Wellington's Victory, is more effective than yet another "Dectet".

Your purposes may fall within the answer above, or may require further clarification or consideration. Particularly, the question of "10 instruments or 10 players" needs to be answered, as does differentiation from all the other 10-instrument percussion ensembles in the universe.

The Piano was first made in 1157. WHERE the piano WAS made..... i have no clue! but you can find this piece of information on ask.com

Thank you for coming on WikiAnswers for this information! :)