To find out when your Remington 514 single shot 22 rifle was made look on the left side of the barrel near the receiver. There will be a manufacturerÕs code in that area which will indicate the month and year of production.
In the year 1890,as a model No.4 rolling block rifle.
Best to ask a gunsmith for help.
It's date code stamped on the barrel see related links for information on the Remington Society of America.
According to the Remington website, there are three possible years for the manufacture of your Remington UMC 380, with a serial number of PA 50795. Those years are 1995, 1968, or 1923.
Pretty darn new... Check related links for barrel code dating on the Remington Society of America.
The Remington model 510 Target Master was made from 1939-1962.
If you are asking about the Remington 6.5 rem.mag round,then this cartridge takes large rifle/or large rifle magnum primers.The .223 Remington cartridge takes the small rifle primer.Both of these center fire primers differ in size and cannot be interchanged.The .223 Rem cartridge requires small rifle primers.
Not much Remington pretends that model never existed, woefull trigger assembly. I would be happy getting anything near or over 100 bucks for a 525 . Based on my own experience. I never had a rifle literaly fall apart on me before , and I take good care of them.
These can range in price from 95-250 dollars depending on the exact model(Rem 510,510A,510c,510P,or 510 smooth bore).If your rifle shows between 60%-90% of it,s original finish and a good bore.
It's date code stamped on the barrel, see related links for information on the Remington Society of America.
All Remington model 870 shotguns were made in the Unites states.The Remington plant was located in Ilion,New York.
Sure. A Sportsman 78 is just an ugly 700 with a cheaper trigger. Any 700 part can be used on it.
See related links for information on the Remington Society of America, data code stamped on the barrel.
The Remington model 722 rifles were made from 1948-1962.To get the exact year of production,Remington used a barrel date letter code which can be found just ahead of the receiver on the barrel.This will be a 2,or 3 letter code.Then go to Remington,s web site and find the letter code system and date your rifle to the correct year.I have 2 Remington model 722 rifles,one in 300Savage caliber and the other in .244 Rem.caliber and would not sell either one.They are wonderful and accurate rifles.
See related links for the information on the Remington Society of America.
Check the date code on the barrel, see related links for the information on the Remington Society of America.
Check the date code on the barrel, see related links for the information on the Remington Society of America.
Between 100-400 dollars,depending on overall condition.
Tighten the screw in upper left corner on the left side of the receiver. Check all other screws while your at it.
Check the extractor pin that latches onto the rim of the shell to pull it out. I just was diagnosing mine and found the tip of it broke right off. It should be a fairly long little arm with a hook on the end attached to the action of the gun.
They are all date code stamped, see related links for information on the Remington Society of America.
I suggest that you procure a copy of the Gun Digest Assembly/Disassembly book for law enforcement weapons. The Thompson is included. Find it on Amazon.
Without seeing it, almost certainly not.