answersLogoWhite

0

🧩

Sears Roebuck Firearms

Sears Roebuck Firearms was the retailer of shotguns, rifles and pistols manufactured by Marlin, Winchester and Springfield. All firearms were labeled as “sporting goods” until the company stopped selling them in 1980.

2,663 Questions

Where can i purchase a hand grip for a J C Higgins Model 85 22 cal Pistol?

You can purchase a hand grip for a J.C. Higgins Model 85 .22 caliber pistol from various sources, including online retailers like eBay, GunBroker, or specialized firearm parts websites. Additionally, local gun shops or pawn shops that deal in vintage firearms may have the part or be able to order it for you. It's also worth checking forums and groups dedicated to vintage firearms for potential leads on parts.

Where can I buy a magazine hawthorne warrior M825 22lr rifle?

You can purchase a magazine for the Hawthorne Warrior M825 .22LR rifle from various online retailers specializing in firearm accessories, such as Brownells, MidwayUSA, or OpticsPlanet. Additionally, you may want to check with local gun shops or gun shows to see if they have the specific magazine in stock. Ensure you are compliant with all relevant firearm laws and regulations when purchasing firearm accessories.

Who made ranger 22 long rifle 103.13?

The Ranger 22 long rifle 103.13 was likely manufactured by Ranger Arms, a firearm manufacturer that produced firearms in the early to mid-20th century. Ranger Arms produced a variety of firearms, including rifles and shotguns, and were typically sold through retailers such as Sears, Roebuck & Co.

How do you break down a Higgins Model 30 22LR for cleaning?

These guns were made for Sears by High Standard and are not very user friendly in disassembly. Make sure the gun is unloaded and remove the inner magazine tube. Remove the large slotted crossbolt at the rear of the receiver that goes through both wooden forearm extensions. You should be able to remove the trigger group downward. Do not lose the disconnector from the side of the trigger housing. Do not attempt to disassemble the trigger housing. If you attempt to remove the bolt, have a bandaid ready. http://www.histandard.info/manuals/sears/rfrifles/index.html

What information is there on a Ranger 101.5 bolt action 410 shotgun purchased new around 1936?

The Ranger 101.5 bolt-action shotgun was manufactured by Stevens and sold through Sears. It features a 3-round capacity and a 24-inch barrel. Given its age and unique design, it may be of interest to collectors or firearm enthusiasts.

Are 22 s-l-lr bolts and magazines easy to come by?

22 S-L-LR bolts and magazines are relatively easy to come by, as they are common accessories for firearms chambered in .22 caliber. They are available through many gun shops, online retailers, and dedicated firearm accessory stores. It's always a good idea to check availability and pricing from various sources before making a purchase.

Where can you get a magazine for a 1966 or 67 Sears Model 42 bolt action rifle number 103.2840?

While searching around for the Sears Model 42 103.2840 I ran across a website that said this particular gun is a Marlin 80 and parts for this gun can be obtained from Numrich gun parts in NY. As of 2-10-07 the website shows they are out of stock on the magazine(Numrich item number 403090A for $8.40 each.) Will be calling Monday.

Where can you find a tube magazine for a 22 caliber Sears Model 5?

You can try looking for a tube magazine for a .22 caliber Sears Model 5 at gun shops, online gun parts stores, or through auction sites like eBay. It's important to ensure the magazine is compatible with your specific model to avoid any fitting issues.

Where can you find a magazine clip for a 30-06 JC Higgins Model 50?

I was looking for the same thing and this is what I found. I havn't tried it but it looks right. go togunpartscorp website, search under Savage/Stevens/Springfield.

hope that helps .

Hi,

I was looking for the same thing a magazine 22cal 84c. I found two types at

ammoclips website. the 5 round was 28.00 and the 10 round was 30.00.

I hope its what you need.

Kevin

Where can you find information about a Ranger 101 14 semi-automatic and where can you buy a magazine?

You can research information about the Ranger 101 14 semi-automatic rifle on gun forums, manufacturer websites, or firearm review sites. To buy a magazine for this rifle, you can check online retailers such as Brownells, MidwayUSA, or GunMagWarehouse. You may also visit local gun shops or gun shows to find magazines for the Ranger 101 14.

What is the age of a model 41-103.19771 sears 22 cal rifle?

Your rifle was made by Marlin (their Model 101) for Sears. First produced in 1951, it has been discontinued. If yours does not have a serial number, it was made prior to the 1968 Gun Control Act.

What is the value of a ruger mini 14 ranch rifle?

if it is in good condition you can get about 1000 for the ranch and the military one a bit more i believe in geat condition. i bought mine used for 350 because it had a big chip in the barrel from a heat shield

fixdeluxe1's Improvement:

You can pick up the civilian version in New Zealand for $1200.00 and the Hi-cap Military/Law enforcement for 1700 Euros in Germany.

If you are planning to sell a second-hand civilian hunting version then you could get around about $700.00-$1000.00 if in good working order.

<><><>

A check of US sales for used Mini 14s in March 2011 shows an average of $500-$700.

*****

They are legal in the Socialistic Countries while the State Senator of California are about to Ban them. I think they are currently around $700 USD on the auction sites.

I think the above quotes by the original poster are accurate!

Where can you find information about a 20 gauge Ted Williams Model 200 with 3'' chambers which was sold by Sears Roebuck Co?

The Sears 340 was made by Ithaca as the Model 49ss (for stainless steel). It was made from 1961-78, and is a Martini action single shot lever rifle. For more info, research under the Ithaca designation.

In my opiniont the above statement about ss meaning stainless steel is wrong. SS in this case probably means "single-shot." The Model 49 by Ithaca was a single-shot .22 rifle, a lever-action but with a Martini action. It was never made in stainless steel. It was made from 1961-78. As for the Sears Model 340 I do not know about that gun but one could look in the Standard Catalog of Firearms and find out or find one of many web sites that give crossover information on Department Store/Catalog House guns that had their brand name on but were made by some large gun company. One of Sears' brand names, for example, was J. C. Higgins.

I concur with the 2nd poster. SS means Single Shot. The Sears model 340.xxxxx is a clone of the Model 49 and made by Ithaca with the Ted Williams signature on the barrel. The only difference is the absence of the fake ammo tube and the Sears model has a heavy "bull" barrel. Despite what is stated about "house brands" not being collectible since I got interested in Ithaca's in 1993 I have only seen 3 of these rifles.

If it is in VG shape to ask $175 would not be unreasonable.

Where can you find information on the value of a 1913 J Stevens 12 gauge shotgun?

With that version of the Stevens name, it would have been made after 1920 when the company became a division of Savage Arms and 1948 when the name was changed to simply "Stevens". As you said, it is a good, dependable gun, but it is not a collectable, so the value lies in it's utility. In most parts of the country it would retail for about $250 in NRA Good to Very Good condition.

Does a Sears Ted Williams Model 34 semi auto 22 from the 50's have any value?

I don't know about dollar value but mini is known in my family as the gun that has killed more deer than any other. I put it as better than the new winchesters. I don't know about dollar value but mini is known in my family as the gun that has killed more deer than any other. I put it as better than the new winchesters.

What is the value of a 12 gauge Sears Ted Williams Model 200 shotgun with a 2 3-4 inch chamber?

These were versions of the Winchester 101 as made for Sears. The Sears version is going to sell about 25% under the Winchester version, and above and beyond that condition is everything. Used and abused will bring about $350-$450, truly excellent should bring $700-$850. We are always cash buyers. www.countrygunsmith.net

Trending Questions
What is a Ted Williams signed 30 30 Winchester worth with the box? What is the age of a Sears model 101 5350 D shotgun? Where can you get parts for a JC Higgins 22caliber pellet gun model number 1262831? Where can you find a parts breakdown and availability for a Sears mod 42-103-2840-22Cal rifle? Where can you buy parts for a Sears Roebuck JC Higgins Model 101.16 22 rifle? What is the value of a 1933 22 caliber Continental Arms Company rifle? Where can you find parts for a JC Higgins model 20 12 gauge? What year was the JC Higgins model 66 made? Where can a barrel for 410 gauge shotgun manufactured by eastern arms for sears roebuck be purchased? Looking for a bolt for sears 22 rifle model 1? Where can you find information about a JC Higgins Sears Roebuck slide action BB air rifle Model 126102940? How do you find information on High Standard shotguns? What is info on the model 583-1 Sears-Roebuck? What is the age of a 12 gauge JC Higgins Model 583.10 shotgun? Where can you get a owners manual for a old sears and roebuck scroll saw serial number 103.23151? What is the value of a sears 12 gauge ted Williams model 66 auto with a 2 34 chamber? What is a old 16 gauge sears and roebuck bolt action shotgun worth? What is the value of a Sears 20 gauge side-by-side Aya-Aguirre Aranzabal shotgun model 433 512381? How much is sears roebuck pot belly stove model 119 59 worth? What is value of Sam Holt Arms 10 GA double barrel with outside hammers Has dog on side Belgian laminated steel barrels Breech loaded also have original ammo for it?