Temperature

A mercury thermometer, a digital thermometer, or a thermocouple thermometer would be suitable for measuring the boiling point of water, as they are capable of measuring temperatures accurately up to the boiling point of water, which is 100°C or 212°F.

There is no normal temperature, it varies from place to place depending on the climate.

Oh, dude, let me break out my calculator for this super urgent question. So, 5000 to 6000 degrees Celsius is like, around 9,032 to 10,832 degrees Fahrenheit. But seriously, who needs to know that unless you're planning a vacation to the sun or something?

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32
In this case, the answer is about -31 degrees Fahrenheit.

Oh, dude, water boils at 100 degrees Celsius at sea level, but in Johannesburg, which is at a higher altitude, water boils at around 95 degrees Celsius because the air pressure is lower. So, like, if you're planning a tea party in Johannesburg, make sure to adjust your boiling time accordingly.

The element with the lowest melting and boiling point is helium. Helium is a noble gas with an atomic number of 2 and a very low atomic mass, which contributes to its low melting and boiling points. At standard pressure, helium has a melting point of -272.2 degrees Celsius and a boiling point of -268.9 degrees Celsius.

Well, if the temperature rose 23 degrees to reach 71 degrees Fahrenheit at 4 PM, then it must have been 48 degrees Fahrenheit at 6 AM. To create an addition pattern, you can add 23 degrees to the previous temperature at each hour. So, starting from 6 AM at 48 degrees, add 23 degrees to get 71 degrees at 4 PM.

To convert degrees Fahrenheit to degrees Celsius, subtract 32, multiply by 5, and divide by 9. In this instance, 70 - 32 = 38 x 5 = 190 / 9 = 21.2 recurring (that is, 21.2222...) degrees Celsius.

False. A boiling point is a physical property of a substance, not a chemical property. Chemical properties describe how a substance interacts with other substances to form new substances, while physical properties are characteristics that can be observed or measured without changing the substance's chemical composition. Boiling point is the temperature at which a substance changes from a liquid to a gas at a given pressure, which is a physical characteristic.

Cold and hot are relative terms. You need to state a base reference for comparison.

A little chilly, but perfect temp.

350 °F in celsius is 176 °C. Here's the formula to figure out how to convert fahrenheit to celsius:

Solution:

1.) Subtract 32 from 350 °F.

350 - 32 = 318

2.) Multiply 318 by 5.

318 x 5 = 1,590

3.) Divide 1,590 by 9.

1,590 / 9 = 176.6

So... (350 °F - 32) x 5 / 9 = 176.6 °C

Hope this helped! :D

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32
In this case, the answer is -4 degrees Fahrenheit.

One degree Fahrenheit is equal to 0.5556 degrees Celsius. To convert this temperature change to energy in joules, you would need to know the specific heat capacity of the substance in question. The formula to calculate the energy change in joules is Q = mcΔT, where Q is the energy change, m is the mass of the substance, c is the specific heat capacity, and ΔT is the temperature change in degrees Celsius.

Flour does not melt. It is an organic material that will char and burn as the temperature increases. The flour is mainly carbohydrate that will burn to produce carbon dioxide and water but due to the high carbon content it could just slowly turn into charcoal if there is no air constantly mixed in.

Oh, dude, 370 degrees Fahrenheit is like around 187 degrees Celsius. So, if you're baking cookies and need to convert the temperature, just remember it's like 187 degrees Celsius. But hey, who really cares about the exact number, right? Just don't burn those cookies!

Well, honey, the graph at the melting and freezing points of water is flat as a pancake. This shape tells you that the temperature remains constant during these phase changes. So, don't expect any temperature changes while water is busy melting or freezing, darling.

Oh, dude, like totally! 30 degrees Celsius is like, 20 degrees warmer than 10 degrees Celsius. It's like comparing a mild day to a scorching hot one. So yeah, it's definitely warmer, like no doubt.

Mildly hot it is good weather to b outside

Alright, buckle up, honey. 450 Kelvin is 176.85 degrees Celsius. And if you're feeling a little American today, that's 350.33 degrees Fahrenheit. So whether you like your temperature in Celsius or Fahrenheit, 450 Kelvin has got you covered.

-16 Celsius is colder than -15 Celsius. The temperature scale is based on the freezing and boiling points of water, with 0 degrees Celsius being the freezing point and 100 degrees Celsius being the boiling point. Therefore, the closer the temperature is to 0 degrees Celsius, the colder it is.

Celsius X 1.8 + 32 = Fahrenheit ex: (40C X 1.8) = 72 + (32) = 104 degrees F

F to C: Deduct 32, then multiply by 5, then divide by 9

C to F: Multiply by 9, then divide by 5, then add 32

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32
In this case, the answer is about 87.8 degrees Fahrenheit.

Boiling point is the temperature(at a particular pressure) of a pure substance at which it boils . e.g water at 1 atm will boil at 100 degreeC. If u start heating water

its temperature will rise from ambient to 100 degC only until it totally boils to steam.

For a mixture of two components there will not be a single b.p. During boiling its temp will rise so the mixture will have an initial b.p and a final b.p.

For a pure component you only have boiling point, if u cool steam from say 120 degC, water will condense out at 100 degC.

If you cool air which contains water which we call water vap or moisture, the water will condense at a particular temp which we call as dew point. This temp will depend on the amount of water vap in the air.