Tractors and Farm Equipment

The Kubota 15651 refers to the D905 engine model, which is commonly used in various Kubota machinery. This engine was introduced in the 1980s and has been a reliable choice for applications requiring compact and efficient diesel power. The specific year of the model can vary depending on the equipment it is used in, as Kubota has produced multiple versions and iterations over the years.

To replace a Kubota thermostat, first, ensure the engine is cool and disconnect the battery. Remove the radiator cap and drain the coolant. Then, locate the thermostat housing, typically near the engine block, and remove the housing bolts. Take out the old thermostat, clean the surface, install the new thermostat with the spring side facing the engine, reassemble the housing, and refill the coolant before reconnecting the battery.

The value of a 1970 White 2270 tractor can vary significantly based on its condition, hours of use, and specific features. Generally, prices can range from $3,000 to $10,000. For a more accurate estimate, consider checking local listings or auction sites for similar models. Consulting with a tractor dealer or appraiser may also provide additional insights into its current market value.

Tractor Supply typically does not sell NexGard, which is a prescription flea and tick medication for dogs. You can usually find NexGard at veterinary clinics, pet specialty stores, or through online retailers. It's best to consult your veterinarian for a prescription and guidance on where to purchase it.

The Kubota B7100 typically uses SAE 10W-30 or 15W-40 engine oil, depending on the temperature conditions in which it operates. It's essential to refer to the owner's manual for specific recommendations, as well as for the oil change intervals and capacity. Always ensure the oil meets API service classifications suitable for your engine. Regular oil changes will help maintain engine performance and longevity.

If your B8200 Kubota tractor's hydrostatic drive seems locked up despite the foot pedal pump functioning and lowering the motor, it could indicate a few potential issues. You might be facing a problem with the hydrostatic transmission itself, such as low fluid levels, contaminated fluid, or a malfunctioning pump or motor. Additionally, check for any obstructions or linkage issues with the drive system that may prevent it from engaging properly. It's advisable to consult the tractor's manual or a professional technician for a thorough diagnosis.

A spread axle refers to a trailer axle configuration where the axles are positioned further apart than the standard distance. This design enhances weight distribution across the axles, improves stability, and reduces the risk of overloading a single axle. Spread axles are commonly used in flatbed trailers and other heavy-load applications to comply with road weight regulations and improve maneuverability. This configuration can also help prevent tire wear and enhance overall handling.

Tractor rear tires are large to provide better traction and stability while operating on uneven and soft ground. The bigger size helps distribute the weight of the tractor over a larger surface area, reducing soil compaction and improving grip. Additionally, larger tires enable tractors to pull heavy loads more efficiently and navigate through various terrains. This design is essential for optimizing performance in agricultural tasks.

To set the ignition points on a Case 300 tractor, first, ensure the engine is off and cool. Remove the distributor cap to access the points, then rotate the engine until the points are fully open. Use a feeler gauge to measure the gap, which should typically be set to 0.020 inches; adjust the points as necessary. Finally, reassemble the components and double-check the gap before starting the engine.

The International 574 tractor is known for several common issues, including electrical problems such as faulty wiring and starter issues, which can affect its starting and operation. Additionally, some users report hydraulic system failures, leading to difficulties in lifting implements or maintaining proper fluid levels. Engine-related problems, such as overheating or oil leaks, may also occur, particularly in older models due to wear and tear. Regular maintenance and inspections can help mitigate these issues.

The Fram oil filter that fits a Kubota L3710 HST is typically the Fram PH6607. However, it's always best to verify compatibility with your specific equipment model and consult the owner's manual or a local dealer for confirmation. Additionally, consider checking other brands for equivalent filters, as there may be alternatives available that fit the same specifications.

I’m sorry, but I can’t provide specific email addresses for companies, including Kubota Tractor Corporation. However, you can typically find contact information, including email addresses, on the official Kubota website or by reaching out to their customer service directly.

The maximum weight a single axle tractor can haul generally depends on regulations set by the Department of Transportation (DOT) and varies by jurisdiction. In the United States, the typical maximum weight for a single axle is around 20,000 pounds. However, the total weight that a single axle tractor can haul also depends on factors like the trailer configuration and the number of axles involved in the overall vehicle combination. Always check local laws for specific limits.

The weight a single axle trailer can carry typically ranges from 1,500 to 7,000 pounds, depending on the trailer's design, materials, and axle rating. Most commonly, single axle trailers are rated for around 3,500 to 5,000 pounds. It's essential to check the manufacturer's specifications for the exact weight capacity and ensure that the load does not exceed this limit for safe towing. Additionally, consider the weight of the trailer itself when calculating total load capacity.

Before entering a trailer that is not attached to a tractor, ensure that the trailer is properly secured to prevent it from moving. Check that the trailer's landing gear is fully deployed and stable. Additionally, inspect the area for any hazards and ensure that the trailer's brakes are engaged. Always communicate with others in the vicinity to ensure safety during operations.

To replace the oil seal on the drive shaft of a Massey Ferguson GC2300 tractor, first, ensure the tractor is turned off and securely supported. Remove the drive shaft from the hydraulic transmission by unscrewing any retaining bolts and gently pulling it out. Once the shaft is removed, use a seal puller to extract the old oil seal from its housing, then clean the area thoroughly. Finally, install the new oil seal, ensuring it is seated properly, reassemble the drive shaft, and tighten all bolts to the manufacturer’s specifications.

If your 1528 Massey Ferguson tractor shuts off when engaging the turtle or rabbit gears, it could be due to a few issues. One possibility is that there is a problem with the transmission or linkage causing excessive load on the engine. Another reason might be an issue with the fuel system or a clogged filter, which could lead to insufficient fuel delivery under load. It's advisable to check the transmission fluid levels and inspect for any obstructions in the fuel system.

A 2016 Freightliner tractor typically weighs between 15,000 to 20,000 pounds (approximately 6,800 to 9,100 kg), depending on the specific model and configuration. This weight can vary based on factors such as the engine type, added features, and the presence of any additional equipment. Always check the manufacturer's specifications for precise weight details.

Used tractor cabs can be found at various places, including online marketplaces like eBay, Craigslist, and specialized agricultural equipment websites. Local farm equipment dealers and auctions often have used parts and cabs available as well. Additionally, salvage yards that deal with agricultural machinery might have what you need. It's also helpful to check farming community forums and social media groups for leads on used equipment.

A farm equipment that creates a long dirt mound is a plow, specifically a moldboard plow. This type of plow turns over the soil, creating furrows and ridges that can form long, raised mounds of earth. Other equipment, like a disc harrow, can also help shape the soil but is primarily used for tilling rather than creating distinct mounds.

To get your tractor out of the mud, first, try to gently rock it back and forth by shifting between forward and reverse gears. If that doesn't work, use a shovel to remove mud from around the wheels and tires to create space. Placing materials like plywood, gravel, or boards under the tires can provide traction. If the situation is severe, consider using a tow strap or asking for assistance from another vehicle.

The average operating temperature for a diesel tractor engine typically ranges between 180°F to 220°F (82°C to 104°C). Maintaining this temperature is crucial for optimal performance and efficiency, as it helps ensure proper combustion and reduces wear on engine components. If the temperature exceeds this range, it may indicate potential issues such as overheating, which can lead to engine damage. Regular maintenance, including cooling system checks, is essential to keep the engine within this temperature range.

The load capacity of a 28-foot semi trailer typically ranges from 10,000 to 26,000 pounds, depending on the trailer's design and the weight limits set by regulations. However, the maximum payload also depends on the type of cargo, weight distribution, and local laws regarding road weight limits. Always consult the manufacturer's specifications and local regulations to ensure compliance.

The Kubota GF1800 with a serial number of 10530 was manufactured in 2007. Kubota typically assigns serial numbers sequentially, and the GF1800 series was introduced in the mid-2000s. Therefore, based on the serial number provided, it can be determined that this specific unit is from that production year.

The weight of a box trailer can vary significantly based on its size and construction materials. On average, a small box trailer may weigh between 500 to 1,500 pounds (227 to 680 kg), while larger models can weigh anywhere from 2,000 to 3,500 pounds (900 to 1,600 kg) or more. Always check the manufacturer's specifications for precise weight information.