Volume

The volume of water in the rectangular swimming pool can be calculated using the formula for the volume of a rectangular prism, which is length x width x height. In this case, the volume would be 18m x 10m x 2.5m = 450 cubic meters.

If you remember the following facts,

you'll never go wrong:

==> 1 cubic foot = 1,728 cubic inches

==> 231 cubic inches = 1 gallon

The number of milliliters in 113 grams depends on the density of the substance. If you know the density, you can use the formula: volume (in milliliters) = mass (in grams) / density (in g/ml). If you don't know the density, you cannot accurately convert grams to milliliters without additional information.

0.264 gallons is 33.792 fluid ounces. (US)

An 8 x 8 Pyrex baking dish typically holds about 2 quarts.

1 acre-inch equates to 102.8 meters cubed.

Micron to millimetre is /1000. micron cubed to mm cubed is / a billion. Therefore this is 1mm3. 1mm3 is 2.64172x10-7 US gallons

1 pound is a unit of mass, while cubic feet is a unit of volume. The conversion between mass and volume depends on the density of the material. So, 1 pound can be converted to cubic feet only if the density of the substance is known.

0.50dL converts to 50mL (there are 100mL per deciliter).

There are approximately 14.79 milliliters in 1 tablespoon (tbsp).

You can use a stacked area chart to show how individual volume changes over time in relation to total volume. This type of chart allows you to see both the individual component volumes and how they contribute to the total volume over the selected time period.

do you mean cubit feet?

***Except for the answer, the below was copied and pasted.***

To answer conversion questions like this go to Google.com and in the search window, type in your question like this..

24 cups in gallons

or this

4000 square feet in acres

or this

45 inches^3 in liters

and it will give you a direct answer.

It is great for this.

In your case type in

??????????????

Note, you can also use the Google search window as a calculator. You might type in

23.5 x 54^2 x sqrt 5 =

If this is a homework question, the below is a very powerful and easy method to convert numbers from one unit to another.

Let us take an easy example.

Say you have 2.7 meters and you want to convert it to centimeters.

You know that 1m = 100 cm

Think about how we can take the equation 1m = 100 cm and divide both side by "1m" and get 1= 100 cm/m. (We have "re-arranged" the equation.)

Now think about how it is that if you multiply 2.7m by the number 1 you simply get 2.7m again.

Now think about how since "100 cm/m" equals 1 because 1= 100 cm/m you can multiply 2.7 m by "100 cm/m" and you will have the same distance. The only difference is that after you cancel out the meters the distance will be expressed in different units.

Here it is expresses mathematically...

2.7m = 2.7m X 1 = 2.7m X 100 cm/m = 270 cm. Notice how the meters cancel each other out and you are left with centimeters.

This always works

Here is a harder example.

Convert the speed 8,100 m/s to the units of km/hr

As discussed above since 1000m = 1 km, we will in this case divide both sides of the equation by "1000m" and get 1=(1/1000)km/m.

when we multiply by that and cancel out the meters, we get 8,100 m/s = 8.1 km/s.

(Note that we could have taken the equation 1000m = 1 km and divided both sides by "1km" to get 1 =1000m/km and then DIVIDED by 1000km/m and the meters would have still canceled out. Here is the math 8,100m/s = 8,100m/s / 1 = 8,100m/s / 1000m/km = 8.1 km/s )

Now to convert the seconds to hours we first convert the seconds to minutes by taking the equation 1min = 60s and dividing both sides by "1min" to get the equation 1 = 60s/min

When we multiply 8.1 km/s by the above we get 480 km/min

We do the same thing with the equation 1hr = 60 min to get 1 = 60 min/hr and when we multiply, we get 28,800 km/hr which is in the correct units.

For some reason it is not the law for physic teachers to tell their students about this method.

Here is website that goes into it in more detail.

http://oakroadsystems.com/math/convert.htm#Intro

No. you are 16 ounces short of a half gallon.

1 quart is 32 ounces

1/2 gallon is 64 ounces

1 quart(32 ounces) plus 16 ounces(one pint) is 48 ounces.

It takes around 8 pool tabs to equal 1 gallon of household bleach. Pool tabs are typically more concentrated than liquid bleach, so you need fewer tabs to achieve the same cleaning effect.

13.525 US fluid ounces is equal to about 400mL

There are approximately 5.07 fluid ounces in 150ml.

there is no liquid in coke its just liam in a school in trafford coz santa looks like an ice cube and chocolate is not a tower is a pornstar coz jack is sat on the left of me nd connor is on the right coz im the middle man and the middle man has a bigger bag

When you sneeze, the amount of water released from your mouth can vary depending on factors like the force of the sneeze, the amount of mucus present, and individual differences. On average, a sneeze can expel droplets containing anywhere from 10,000 to 100,000 bacterial cells, but not necessarily a specific volume of water.

27 cubic feet = 1 cubic yard

54 cubic feet = 2 cubic yards

.

.

108 cubic feet = 4 cubic yards

You would need to drink approximately two 16.9 ounce bottles of water to get one liter, as one liter is equivalent to about 33.8 ounces.

To convert tons to cubic meters, you need to know the density of the substance in question. The conversion factor will vary depending on the specific material. If it's water, 1 ton is approximately equal to 1 cubic meter. For other materials, you'll need to find their density and use that to calculate the conversion.

850 US gallons is ~3.22 cubic meters.

A large load of laundry typically uses about 40-45 gallons of water. This can vary depending on the size and type of washing machine, as well as the water efficiency of the appliance. It's generally recommended to use high-efficiency machines to save water and energy.