Volume

1litre is 1000ml.

therefore...40,000ml is 40litres.

One teaspoon equals 5 mL, so half of a teaspoon is 2.5 mL.
That is approximately 2.5 ml of water.

In the US it is sold by the US gallon, in the rest of the world by the liter. US gallon = 3.8 liters. Both are volumes.

You can measure the volume of gum by displacing water in a graduated cylinder. Drop the gum in water and record the volume before and after. The difference will give you the volume of the gum.

The question cannot be answered since there is no such unit as a killilitre!

There are 240,000,000,000 milliliters in 240,000 cubic meters. This conversion is done by multiplying the volume in cubic meters by 1,000,000, which is the conversion factor from cubic meters to milliliters.

No, 1.25 ml is less than half a teaspoon. One teaspoon is approximately 5 ml, so half a teaspoon would be around 2.5 ml.

A pot is a container used for cooking and does not have a standard volume measurement. The volume of a pot can vary widely depending on its size and shape. Kiloliters is a unit of measurement used for volume equal to 1,000 liters.

1 liter = 2.11 pints

1 pint = 0.47 liter

1816 quarts, or

3632 pints, or

5262 cups

2.5 cubic meters of space is the same thing as 2,500 liters of space.

how many tablespoons of butter is equal to 175gm

There are around 14.5833 troy ounces in 16 avoirdupois ounces.

15 ml = 0.51 US fluid ounces.

One tablespoon of sugar is equivalent to about 12.5 grams.

0.26 gal. U.S. gallons are different from imperial gallons. 1 Imperial gallon is equal to 4.54609188 litres and 1 US gallon is equal to 3.78541178 litres. Liters on the other hand are the same everywhere. One liter equals 0.26 U.S. gallon or 0.219 Imperial gallon.

You look up the definition of a "barrel", for example the Wikipedia article on "barrel (unit)", decide which definition you want to use (there are several), check how many liters your chosen "barrel" has, then divide the 12 liters by this number.

The gallon and quart sizes are traditional units of measurement in the United States, while the liter size is more common in Europe and other parts of the world. The decision to sell soda in one and two liter containers is likely due to the metric system being widely used for measuring liquids in the beverage industry. Additionally, a one-liter bottle of soda is equivalent to approximately 33.8 ounces, which is close to the standard 12-ounce serving size of canned soda.

Cubic centimetres and millilitres are equal measurements for volume. Therefore, no real conversion is necessary; all you have to do is change the unit:

1 cm3 = 1 mL

563 cm3 = 563 mL

Weight of broken limestone=1554 kilograms per cubic meter. One tonne=1,000 kilograms. One tonne broken limestone=.64 cubic meters.

There are approximately 1 ounce in 0.029 liters.

Glad that you asked. (I just read a book about measuring units.) There are 1,000,000,000,000 picoliters in one liter. A feptoliter, attoliter, zeptoliter, and yoctoliter are all smaller than a picoliter. These units are so darn small that it is hard to find out the answer.

4th grader,

Lillian Nguyen

The weight of a cubic foot of rock will depend on the specific gravity and proportion of the minerals that compose the rock.

All depends on what you are trying to measure. Could be as simple as a tape measure/ruler where you measure 3 along 3 axes (sides) for a simple shape to a sophisticaled, calibrated laser surveying. Which ever way, it is achieved in the same way(mostly), which is measuring lengths of the object (along certain axes(as in the plural of axis, wiki cartesian coordinates if you are interested to give you some insight). Afte the lengths have been found a volume can be found. For complicated shape this has to be broken up in to smaller achievable pieces, (even most of the very sophisicated technology does this)

Alternatively if if it is to find the defining equation of the planes, it is possible to derive the volume of the object using calculus.

another option is if you are measuring a fluid you can drop something of known volume and measure the displace,ment of the fluid and that would allow you to calculate the volume

another option is ultrasonics for instance ultrasonic electromagnetic readiation is basically bounced through a material (for example a metal) and you measure the time it takes to propogate through the material,and if you know the density of the material and the length that is basically enough to be able to calculate volume also.

either way it really depends on what you are trying to measure.