Volume

0.37 gal

1 gallon = 4 quarts

1 quart = 0.25 gallon

.4375 gallons

4 quarts = 1 gallon

.25 quarts = .0625 gallons

2 quarts = .5 gallons

1.75 quarts = .4375 gallons

1 metre = 1000 millimetres

2.2 liters is equivalent to 74.4 fluid ounces.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Milliliters are three places to the right of liters. So you have to move the decimal place three times to the right. You will get 5 L = 5,000 mL.

0.94 oz

1 ounce = 29.57 ml

1 ml = 0.03 ounce

Roughly .27 1 gallon of milk is 8lbs and at the going rate of 3.60/gal. tahe 3.60/8=.27 Roughly .27 1 gallon of milk is 8lbs and at the going rate of 3.60/gal. tahe 3.60/8=.27

58.38 pounds per 7 gallons of plain water.

I cu yd = 27 cu ft

you cannot get square feet from cubic yards as square feet is area and yards volume - you need to know how deep the 400 sq feet is - in other words, volume.

For example 400 sq feet that is 1 feet deep is 400 cubic feet; then divide by 27 to get cubic yards

To fill half of a cylinder, you would need to calculate the volume of the cylinder and then divide it by 2. The formula for the volume of a cylinder is πr^2h, where r is the radius and h is the height. Once you have the volume, you can convert it to cubic yards by using the appropriate conversion factor.

To convert kilograms to gallons, you need to know the density of the substance being measured. Once you have the density, you can use the formula: volume (gallons) = mass (kg) / density (kg/gallon). Without the density of the substance, it is not possible to provide an accurate answer.

To convert from kiloliters to dekaliters, you would multiply the number of kiloliters by 10. This is because there are 10 dekaliters in 1 kiloliter. For example, if you have 3 kiloliters, you would have 30 dekaliters (3 x 10 = 30).

A pound is a unit of mass. A gallon is a unit of capacity. Without some unit of density to compare, the two units are incompatible.

In a liquid, the particles are close together and have strong intermolecular forces that hold them in fixed positions, allowing the liquid to retain its volume. In a gas, the particles are far apart and have weak intermolecular forces, causing them to move freely and fill the entire container, resulting in no definite volume.

It is 5.897 litres.

Certainly! Liters (L) and milliliters (mL) are units of volume. 1 liter is equal to 1000 milliliters. When measuring larger volumes, such as fluids in a container, liters are typically used. For smaller amounts, such as a single dosage of medication, milliliters are more appropriate.

It depends on what you have 12.5 gallons of. Water weighs 8.34 pounds per gallon. so 12.5 gallons x 8.34 pounds per gallon =104.25 pounrds. Gasoline weighs only about 6.2 pounds per gallon. 12.5 gallons x 6.2 pounds per gallon = 77.5 pounds.

To convert fluid ounces to liters use this conversion: fl. oz x 0.0296 = liters

Weight of 1 US Gallon of water = approx. 8.35 lb x 55 gallons = 459.25 lb

The volume of a cube is given by the formula V = s^3, where s is the length of the edge. In this case, with edges measuring 4.3 ft, the volume would be 4.3^3 = 79.507 ft^3.

The volume of a rectangular bed can be calculated by multiplying its length, width, and height. If the bed has a height of 1 foot, then the volume would be 6 feet (length) * 5 feet (width) * 1 foot (height) = 30 cubic feet.

1 gallon = 4 quarts

1 quart = 0.25 gallon

800 liters = 211.338 US gallons = 175.975 imperial gallons

There are four (4) US quarts in one US gallon and there are 3.33 Imperial quarts in one US gallon.

Remember K H D | d c m. Litres is three places to the left of millilitres. So you have to move the decimal place three times to the left. So in this case the answer is 0.001 litres.