Volume

1600 liters is equivalent to approximately 422 gallons.

The pub in series 6 of Two Pints of Lager and a Packet of Crisps is called The Archer.

There are 1000 cubic centimeters (cc) in 1 liter.

No, that would be 25 ounces total (as there are 16 ounces in a pint in the US). 16.9 ounces is 1 pint and nine tenths of one an ounce, or in other words not quite 17 onces total.

There are approximately 0.65 cups in 5.2 oz.

It depends on the type of wheat used and where it is grown. The weight of one wheat grain varies with wheat variety, climate, season and a number of other environmental factors. The weight of the grains i usually measured in grams per 1000 grains (thousand-kernel-weight) or in grains per pound.

The example below is based on a table of thousand-kernel-weights or TKWs* for different types of wheat in Canada.

In 1 tonne of Canadian wheat you would get something like...

28,985,507.2 grains of Hard Red wheat at an average TKW of 34.5g

28,571,428.6 grains of Soft White wheat at an average TKW of 35g

23,809,523.8 grains of Extra Strong wheat at an average TKW of 43g

23,255,814.0 grains of Durum wheat at an average TKW of 44g

22,471,910.1 grains of Canada Prairie Spring wheat at an average TKW of 44.5g

* see here for a diagram of TKWs from Canada: http://www1.agric.gov.ab.ca/$department/deptdocs.nsf/all/agdex81

Oil is measured in barrels (drums), equating to 42 US gallons.

10 ml equal approximately 0.34 fluid ounces

1.75 L = about 61.59 Imperial fluid ounces.

590 mL equates to approximately 20 fluid ounces.

There are approximately 40 teaspoons in 200 milliliters.

The term is diluted. The sugar is still there, just 'spread out' into a larger volume along with all the other ingredients. It can be called a diluted solution.

1. 26 liquid pints = 12.3 L
2. 26 dry pints = 14.3 L

There is no sensible answer to this question. A square foot is a measure of area, with dimensions [L2]. A cubic foot is a measure of volume, with dimensions [L3]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.

Volume will determine how much water will be displaced. The volume of an object dictates how much space it occupies, which in turn determines the amount of water it displaces when submerged. Mass alone does not directly affect water displacement.

26 liters = 6.86847 US gallons = 5.719 imperial gallons

Rephrasing the question to: How much is 6 cl (Centiliters) in fluid Ounces. 6 cl is 0.06 Liters or 60cc (Cubic Centimeters) or 2.03 US Fluid Ounces. As this is a Cooking Question, the practical answer would be Two Ounces!

Propane has a density of about 4.2 pounds per gallon. So, 17 pounds of propane would be approximately 4.05 gallons. Since 1 gallon is equivalent to 0.133681 cubic feet, 17 pounds of propane would be roughly 0.54 cubic feet.

It takes about 4.18 Joules of energy to heat 1 gram of water by 1 degree Celsius. Therefore, to heat 1 liter (1000 grams) of water by 1 degree Celsius, it would require about 4180 Joules. Converting this to watts depends on the time taken to heat the water.

Cubic feet is a measure of volume and is calculated by multiplying the length, width, and height of an object or space. It is commonly used to measure the capacity of containers, rooms, or other three-dimensional objects. The formula for calculating cubic feet is length x width x height.

To convert milliliters to cubic meters, divide the volume in milliliters by 1,000,000 because there are 1,000,000 milliliters in a cubic meter. For example, 1 milliliter is equal to 1/1,000,000 cubic meters.

11 ml = 0.372 US fluid ounces.

Well, considering that you don't turn on the water while you're brushing, and only turn it on to fill your cup, and rinse your toothbrush, I would say probably 1-2 gallons wasted. Of course, this is only an estimate, and I can't back this up with statistics and such, but I'm sure this is somewhere close to a definite answer. :)

7