Volume

About 110 liters.

1.5 pint

1 pint = 16 ounces

1 ounce = 0.06 pint

Roll the plasticine into a sphere and measure the diameter and use the formula for the volume of a sphere V=pi r^2, then weight the sphere to get the mass and use Density = Volume upon Mass.

Alternatively, use Archimedes' principle: 1) Weigh a piece of plasticine to get its mass. Very carefully fill a glass with water so full that it cannot contain one more drop of water. Immerse the plasticine in the glass, collecting the water that has run out of the full glass. The volume of the water is equal to the volume of the plasticine. Determine the volume of the water by either weighing it (density of pure water is 1 g per mL) or by accurately measuring the volume. Density = mass (g)/ volume (mL)

2) If you have a balance that can determine mass of an hanging object, first weigh your plasticine to determine its mass. Then attach it to string and take its mass hanging (the string also has mass). Then take its mass while the plasticine is just submersed in water. It will weigh less when submersed in water. The loss of mass when submersed is equal to the mass of water that has the same volume as the plasticine. (density of water is 1 g per mL) Now you can determine the volume of the plasticine since the mass lost in g equals the volume of water in mL. Density is the original mass divided by the volume.

There are 1,000 liters of water that can fit in 1 cubic meter. For water, 1 milliliter is equivalent to 1 cubic centimeter.

22.5 L = 4.95 UK gallons or 5.94 US gallons.

: 72) The area of the base is 4 m^2 so 4/3*4.5=6The volume is 6 cubic meters. 73) 6^3/2=108 108/3 * 5 = 36 * 5 = 180

1 quart = .25 gallons.

1 gallon=4 quarts

5 gallons= 20 quarts.

There are 0.764555 meters in one cubic yard. To convert cubic yards to meters, you can multiply the number of cubic yards by this conversion factor:

26.94 cubic yards * 0.764555 meters/cubic yard ≈ 20.61 meters

So, 26.94 cubic yards is approximately equal to 20.61 meters.

The weight of river sand can vary depending on its moisture content, but on average, river sand weighs about 2,600 pounds per cubic yard. So, for 100 cubic feet, you would be looking at approximately 3,704 pounds of river sand.

Square feet are used to measure the surface area of an object e.g. the surface of a table that is 3 feet wide and 4 feet long has a surface area of 4 x 3 = 12 square feet. Cubic feet are used to measure the volume an object takes up e.g. the volume of a chest freezer that is 4 feet long, 3 feet high and 2 feet deep is 4 x 3 x 2 = 24 cubic feet.

There are 128 fluid ounces in a gallon. So, 16 oz is 16/128 = 0.125 gallons.

Yes, a cubic meter is a unit of volume that can represent any shape as long as the space enclosed has dimensions of 1 meter by 1 meter by 1 meter, regardless of the shape of the object.

There are 85902 buy the butt. 898 have fun! help me..

100mL equals 1 deciliter @0.01dl per mL

There are approximately 59.43 fluid ounces in 92 cubic inches, assuming we are talking about water. This conversion is based on the standard conversion of 1 cubic inch being equal to 0.554 fluid ounces.

5000 liters = 1320.86 US gallons = 1099.85 imperial gallons

To convert 5 grams per milliliter to kilograms per cubic meter, you need to multiply by 1000 (since 1 gram = 0.001 kg and 1 milliliter = 0.000001 cubic meters). Therefore, 5 grams per milliliter is equal to 5000 kilograms per cubic meter.

17 Litres = about 4.490 US gallons.

It depends upon the shape of the wooden block. For example, assume that the block has a simple cuboid shape. To find the volume, multiply the length by width and by the height. This can be done using a ruler or a metre stick; it depends upon the dimensions and size of the object. After all, you wouldn't use a ruler to measure a block with a height in metres, would you?

For kitchen and other practical purposes a cc. is equal to an ml.

There are 7.48 gallons in 1 cubic foot. So, 100 cubic feet is equal to 748 gallons.

0.66 cubic meters is equal to 174.10 gallons.