Volume

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Deciliters are one place to the right of liters. So you have to move the decimal place once to the right. You will get 3 L = 30 dl.

33.81 ounces per liter

2 liters = 67.62 ounces

Algebraic Steps / Dimensional Analysis Formula2 l*33.814 fl.oz.

1 l=67.6280454 fl.oz.

Liters to US gallons: liters x 0.264 = US gallons

It depends on how you acquire it.

If you put a barrel at the bottom end of a downspout on the corner of your house and let it fill with rain, its FREE.

If you buy it from the city and it comes through a water meter at your house, its probably about $5.00 per HCF (hundred cubic feet). There are 35.314 cubic feet in a cubic meter, so if you buy it from a public utility, a cubic meter would cost about $0.35. (assuming your utility charges about what Akron, Ohio's does) Oh, and they include the cost of a sewer fee in this price, whether you use it or not.

If you buy bottled water in 500ml single serving clear plastic containers at a dollar a bottle, a cubic meter of water would cost $2000.00. Now that they've made the bottles thinner and you always squish the bottle a bit trying to open it and often end up spilling some on your clothes, this method of buying water has lost some appeal, but its still popular. Go figure.

To defrost 1 gallon of frozen orange juice in the refrigerator, it usually takes about 24 hours. You can also defrost it more quickly by placing the container in cold water, changing the water every 30 minutes to maintain safe temperatures. It is not recommended to defrost orange juice at room temperature as it can encourage bacterial growth.

None.

A metre is a measure of length or distance while a cubic metre is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.

A litre is 1.057 quarts and a cup is 1/4 quart and a ml is 1/1000 litre

100/1000 x 1.057 x 4 = 0.42 cups

OR

1 cup = 250ml

100ml/250ml = 0.4 cup

There are 1,000,000 micro-liters in one liter. This conversion is based on the prefix "micro-" which denotes one millionth of the base unit.

Easy to do. Multiply cubic yards by 27 to get cubic feet.

Specific weight is the weight per unit volume. To calculate specific weight in lb/ft^3, divide the total weight by the volume. First, convert 50 gallons to ft^3 (1 gallon = 0.133681 ft^3) = 6.68405 ft^3. Specific weight = 372 lb / 6.68405 ft^3 ≈ 55.61 lb/ft^3.

A volume of 1 milliliter equals 0.001 liter.

To convert milliliters to liters, multiply the number of milliliters by 0.001 liters.

45 milliliters equal 0.045 liters (45 x 0.001 liters = 0.045 liters).

128 Fluid Ounces make one US (Imperial) Gallon. It is important to note that "ounce" can also refer to a unit of measure for mass, and in some cases you may need to specify which you are referring to.

17

Square meters and cubic meters are different units of measure, where square meters measure area and cubic meters measure volume. To convert square meters to cubic meters, you need to know the height or thickness of the substance you are measuring. Without this information, it is not possible to directly convert 15.35 square meters to cubic meters.

1.05 pint

1 liter = 2.11 pints

1 pint = 0.47 liter

Using the direct variation formula, time = quantity/rate, we can plug in the values: time = 60 gallons / 5 gallons/minute = 12 minutes. It will take 12 minutes for the pump to remove 60 gallons of water.

There are 16 weight ounces in one weight pound.

The oil pressure sensor for an 8.1 liter engine is typically located near the oil filter housing. It may be on the engine block or the cylinder head. Consult the vehicle's service manual for the exact location.

1 jigger (or shot) is 1.5 US fluid ounces.

2.25 gal

1 gallon = 4 quarts

1 quart = 0.25 gallon

370 mL is approximately equivalent to 12.5 ounces.

One cubic meter is 1.31 cubic yards. So, 10 cubic meters = 10 x 1.31 = 13.1 cubic yards