0
Volume
Questions about the various units and conversions of volume. This category is also home to questions which ask the volume of certain objects given length, width, and height.
26,790 Questions
How many SI calories does it take to raise one liter if water 6 degrees Celsius?
It takes 6 SI calories to raise one liter of water by 6 degrees Celsius.
Bottles of oil to produce bottle of water?
Producing one bottle of water requires about one-fourth the amount of oil needed to produce a plastic bottle. The oil is used in the production of the plastic bottle itself as well as in the transportation and energy required for the manufacturing process. Recycling plastic bottles can help reduce the amount of oil needed for new bottle production.
The US government regulated the price of gold at $35 an ounce from 1934 to 1971.
Convert 25000 metric tons of diesel into liters?
The exact volume of diesel is dependent on temperature and exact density. Assuming the weight of 1-liter (L) of diesel equals to be .84-kilograms (kg) gives a yield of 297,619,047-L. 25000-metric tons equals 250000000-kg. Dividing how many kilograms into .84 kg/L yields the answer.
How many 8 ounce portions are there in a ml bottle of Berringer Zinfidel?
There is no such thing as a milliliter bottle of wine. One milliliter is only 0.03381 fluid ounces. A 750 milliliter bottle of Beringer White Zinfandel is equal to 25.36 ounces. This would give a person three 8-ounce servings with a little left over.
How many teaspoon are in an ounce?
1 fluid ounce = 6 teaspoons
Note that this is for liquid ounces, not dry ounces.
* See the Related Questions to the left for some useful conversions between weight and volume.
A liquid ounce is a measure of volume, and a dry ounce is a measure of weight. A teaspoon is a measure of volume. You cannot go from teaspoons to dry ounces without knowing the density of the thing you are measuring.
Dry ounces are a measure of weight. Teaspoons are a measure of volume. A teaspoon of lead weighs a lot more than a teaspoon of water. Most liquids that we are going to measure using a teaspoon are going to be close enough to the ratio shown above to be OK, but don't confuse the two. Bakers routinely measure certain ingredients by weight to account for changes in moisture content.
The rate of flow is 50 gallons per minute. This is calculated by dividing the total gallons pumped (750 gallons) by the time taken to pump (15 minutes).
What is the Viscosity of 60 sugar and 40 water solution?
The viscosity of a 60% sugar and 40% water solution will depend on factors such as temperature and sugar concentration. Generally, increasing the sugar content will increase the viscosity due to the additional dissolved solids in the solution. It is recommended to use viscosity measurements to determine the exact viscosity of a specific solution.
A standard wine barrel typically holds around 225 liters, while a standard oil barrel holds around 159 liters.
How many gallons are there in 10.5 pints?
There are 8 pints in a gallon. Therefore, 10.5 pints is equal to 10.5/8 = 1.3125 gallons.
How many pounds in 208 ounces?
16 oz =1 lb so 16 divided into 208=13 13 is your answer yup i just checked on my phone=]
208 ounces = 13 pounds
7.5 feet by 4feet how meany liters?
7.5 feet x 4 feet gives you an area. Liter is a unit for volume. So you would need another dimension to calculate liters. E.g. 7.5 feet x 4 feet x 5 feet. If my memory is correct, I liter is equal to 1000 cubic centimeters. I feet equals 12 inches and 1 inch equals 2.54 cms. So do the conversion after you get the third dimension also. Hope this helps.
1.8 pints is equal to how many ounces?
28.8 ounces US.
In US measure, 1 pint = 2 cups And 1 cup = 0.5 pint.
There are 16 US fluid ounces, 2 cups in 1 US pint (473.2 ml).
Although there are 20 Imperial fluid ounces in 1 Imperial pint (568.3 ml), the Imperial system does not have cups, so it is best to use half pints.
To convert milliliters (ml) to decaliters (daL), you need to divide by 100. So, to convert 1 ml to daL, you would have 0.01 daL.
The Answers community requested more information for this question. Please edit your question to include more context and detail.
U.S. gallons are different from imperial gallons. 1 Imperial gallon is equal to 4.54609188 litres and 1 US gallon is equal to 3.78541178 litres. Liters on the other hand are the same everywhere. One liter equals 0.26 U.S. gallon or 0.219 Imperial gallon.
How many bullion cubes should you use to make a quart of broth?
Typically, you would use 4 bouillon cubes to make a quart (4 cups) of broth. This ratio provides enough flavor while ensuring the broth is not too salty. However, it's always best to follow the instructions on the bouillon cube packaging for the most accurate measurement.
To convert cubic feet to cubic yards, you need to divide the number of cubic feet by 27 since there are 27 cubic feet in a cubic yard. So, to convert cubic feet to cubic yards, divide the number of cubic feet by 27.
How do you convert liters into cubic meters?
To convert liters to cubic meters, divide the number of liters by 1000. This is because 1 cubic meter is equivalent to 1000 liters. So, if you have 2000 liters, you would have 2 cubic meters (2000/1000 = 2).
What is the formula to find volume of a hexagon?
The volume of a standard hexagon can be given by the product of 6 times the length of one side of the hexagon and the height. Note that for a hexagon to have volume, it must have another dimension that is height.
77 milliliters per second to 1 liter per hour?
To convert 77 milliliters per second to liters per hour, first convert milliliters per second to liters per hour. There are 3600 seconds in an hour. So, 77 milliliters per second is equal to 0.2772 liters per hour.
