Volume

A standard shot is 1.5 oz. Therefore, there are approximately 21 shots in a 750ml bottle (a fifth) of Captain Morgan. Since there are 128 fluid ounces in a gallon, you could get around 85 shots from a gallon of Captain Morgan.

100 milliliters is equal to 0.1 liters.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). These are the denominations you need to list when converting metric units. Milliliters are three places to the right of liters. So you have to move the decimal place three times to the right (same as multiplying by 1000). You will get .75 L = 750 mL.

There are approximately 0.17 fluid ounces in a teaspoon.

You can achieve this by first filling the 3-gallon container with oil, then pouring it into the 5-gallon container. Next, fill the 3-gallon container again and pour it into the 5-gallon container until it's full (leaving 1 gallon in the 3-gallon container).

I saw the same question on a bottlecap the other day, which said 1 gallon. But look up the inverse of this on the web - you'll find the answer to "How much water is in a cubic mile of fog" is around 56,000 gallons. So unless you can turn a gallon of water into 56,000 gallons of water but first turning it into fog - a trick that would put you near the top of the Forbes 400 list, one of the answers is wrong. And judging by how much rain falls on us with a decent cloudburst, I'm in the 56,000 gallon camp.

In the UK a half pint weighs 284 gm (or 284 ml by volume) of most liquids, water, milk etc.
This wont apply to thick liquid mixtures.

Not sure if they use pints in USA but their gallon is smaller so assuming the same number of pints per gallon a half pint would weigh 237 gm.

The typical calculation for finding how much meat a freezer will hole is: 35-40 Lbs. per Cubic Foot. So 10 Cubic Feet should hold between 350-400 Lbs. However, it depends on the type of meat being stored. For example fatty meats like beef do not shrink as much when frozzen as say Venison or another lean meat does. The fat content of your meat is only a slight factor however. If you are storing a fatty meat you can expect to only lose a pound or two per cubic foot. I usually average it out to 37 1/2 Lbs. per Cubic Foot. I hope that helps.

One mL is equal to approximately 0.0338 fluid ounces.

The lowest part. The highest part is hard to determine. At the bottom, ie the lowest point.

1000 millilitres = 1 litre so 44.2 millilitres = 44.2/1000 = 0.0442 litres. Simple!

You can buy gold bullion in a number of different sizes. So it isn't really how many ounces are in a gold bullion it is how much gold bullion would you like to buy.

If you need more information visit a website that i frequently look at

http://www.dgse.com

hope this helped!!

The best way is to hold the liquid temporarily in a transparent container with

volumes marked on it, such as a dropper, a pipette, a beaker, a graduated

cylinder, or a measuring cup.

The volume V can be calculated using the formula V = mass / density. Plugging in the values, V = 152.1 g / 2.165 g/cm^3 = 70.34 cm^3. Therefore, the volume of the substance is 70.34 cubic centimeters.

5.2349812365cm3

50 milliliters is equal to 0.05 liters.

A cc (cubic centimeter) and a mL (milliliter) are the same measure of volume.

That depends on the type material you are referring to. Also, these are two different types of measurements. Gallons is a measure of volume but the other is weight or mass. Please edit your question to include more context or details.

specific gravity means that the ratio between the density of pure water to the density of that material is -----

so the density of the water you are talking about is 1.0254966times the density of pure water which is one so the density of that type of water is 1.0254966

density = mass / volume 1.0254966 = mass / 28316.8

mass = 29038.78 gm

= 29.038 kg the weight = m g

= mass * 9.8

=284.58 N

To convert cubic centimeters to milligrams, you need to know the density of the substance in question. Multiplying the volume in cubic centimeters by the substance's density in milligrams per cubic centimeter will give you the mass in milligrams. The formula is: Mass (mg) = Volume (cm³) x Density (mg/cm³).

Conversions:

1 gram = 0.0022046226 lb (10 dp)

1 millilitre = 0.0000353147 ft^3 (10dp)

6.31g/mL = 6.31*(0.0022046226/0.0000353147) lb/(ft^3)

= 393.9 lb/(ft^3)

Answer:

393.9 lbs per cubic feet

750mL = 25.4 US fl oz

A tablespoon is 3 teaspoons. Therefore, half a tablespoon is one and a half teaspoons.

300 liters = 79.25 US gallons = 65.99 imperial gallons