0
Volume
Questions about the various units and conversions of volume. This category is also home to questions which ask the volume of certain objects given length, width, and height.
26,790 Questions
How many cubic feet is 200 cubic meters?
20 cubic meters are 706.29333443 cubic feet. A volume converter: Scroll down to related links and look at "Conversions of volume and capacity units".
This would depend upon the density of the powder or other substance.
238 grams is mass, and dry cups are a measure of volume. The answer would be different for various types of powder.
What is 0.35 liters need answer for millilters?
One of the delights of the metric system, it it's simplicity in converting between different values.
0.35 litres is 350 millilitre's.
How many Km can you travel on i liter of petrol?
It depends on how efficient sed transportation device is
What is the cost for 2 1 liter sprite bottles?
It depends on where you live and what kind of soda you want. The ranges would be from $0.89 - $3.50 US funds.
Generally, name brand soda is more expensive unless offered on sale.
How do you convert gallons to cubit feet?
None, since there can be no conversion.
A cubit foot = 1.5 square feet is a measure of area in 2-dimensional space whereas a gallon is a measure of volumein 3-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
How many gallons are there in a 37 inch tall 21 inch diameter cylinder?
Assuming the dimensions given are inside dimensions, the cylinder will hold 55.75 gallons - less if the dimensions given are outside dimensions.
How much sodium in one teaspoon salt?
One level U.S. teaspoonful of granulated evaporated salt contains approximately 6,200 mg sodium chloride, or approximately 2,400 mg sodium. The density of granulated evaporated salt varies depending on crystal size, structure, gradation, and degree of compaction. The reported range of densities is 1,200-1,300 g/L. Michaels (1991)[i] uses 1,300-1,315 g/L for Hygrade and Fine salt from Sifto's Goderich evap plant. Niman (1979)[ii], and Bandy (1989)[iii] use 1,250 g/L for granulated evaporated salt (loose bulk density = 800 cc/1,000 g). Niman (1979) gives the density of Alberger as 624 - 750 g/L depending on gradation. Akzo Salt Inc. (1992)[iv] gives the density of General Purpose granulated evaporated salt as 77 lbs/ft3 (1,233 g/L), and of Granulated Iodized as 75 lb/ft3 (1,201 g/L). Akzo Salt Inc. gives densities for Alberger Natural Flake Salt as 39-60 lb/ft3 (625-960 g/L), and Tru-Flake Compacted Flake Salt as 59-70 lb/ft3 (945-1,121 g/L) depending on gradation. The coarse products are generally of lower density. Assuming evaporated granulated salt with a density of 1,250 g/L and 1 U.S. teaspoon = 4/93 mL (1 metric teaspoon = 5.0 mL): Salt (NaCl): 1,250 g/L = 1,250 mg/mL x 4.93 mL/U.S. tsp. = 6,162 mg/U.S. tsp.
Sodium: 6,162 mg/U.S. tsp. x 0.39337% Na = 2,424 mg/U.S. tsp. A simple summary is that about six grams of salt makes a level teaspoonful and just under 2.4 grams is sodium. This is exactly correct for salt with a density of 1,217 g/L. Based on a salt density of 1,250 g/L, one level teaspoon contains approximately 6,200 mg NaCl and approximately 2,400 mg sodium.
When did Canada change to liters from gallons?
Canada's conversion to the metric system began in 1970 and continued into the 1980s. Metric volumes and weights have been required on prepackaged food products since 1976. For gasoline and diesel fuel, the switch was in 1981.
There are 1000 millilitres in one litre. Therefore, 18000 millilitres is equal to 18000 / 1000 = 18 litres.
What is 19 pounds converted to cubic feet?
You can't to do that.
Cubic foot is the measurement unit of volume and a pound is the measurement unit of weight.
For the correct convertion of that kind you must to know the density of a target material (water, iron, sand, wood and so on)
V = W / D
V - volume
W - weight
D - density
