0
What else can I help you with?
What setting should filter be on when adding chemicals?
The filter should be set to the "circulate" or "backwash" position when adding chemicals to the pool. This will help distribute the chemicals evenly throughout the pool water. Make sure to follow the specific instructions provided on the chemical packaging for best results.
How do you maintain a small intex pool?
To maintain a small Intex pool you will need a filter, pool vacuum, pool test kit, net, and chemicals. Keep the filter running to clean the water, test the water daily. Adjust chemicals for chlorine, and PH. Use the net to scoop out leaves and debris as needed, vacuum the pool as needed as well.
Does pool filer sand filter out chemicals?
No.
Can you put chemicals in the pool while the vacuum is in?
It is generally safe to add pool chemicals while the vacuum is operating as long as you follow the manufacturer's instructions for both the pool chemicals and the vacuum. However, it may be more effective to add chemicals when the vacuum is not running to allow the chemicals to distribute evenly throughout the water before the vacuum starts circulating.
What do I do is my pool remains green and cloudy even after running the pump for 5 days straight?
Try to get it all into a filter while at the same time keeping the pool moving (the water moving) and putting chemicals in twice a week. If your pool is green with algae, that means that the water has been sitting still for awhile, the filter hasn't been working, and that there aren't any bacteria-killing chemicals in it.
Do you backwash your pool before you put chemicals in?
No you only backwash your pool when your filter pressure on your filter is high 30psi and above on most pools. If you backwash your pool be sure to add two scoops of de to your skimmer. If the presure is still high the u need to clean the filter
Will a filter be enough for a small pool or do you need to add chemicals?
Filters and chemicals work differently. You'll need both. The filter removes particulate from the water, which makes it clear (which makes you happy). The chemicals act by reducing the amount of microorganisms growing in the water. The chemicals work first and the filter sweeps up after them. For a private pool you can use less of the chemicals than are usually used in public pools.
Do you recirculate or filter after placing chemicals in pool?
Filter it, you need something to catch all the organisms your killing. The filter pump will still recirculate.
Pool pump sounds like it is running hard?
check the filter
When inground pool is running on filter is the drain open or closed?
Closed
Is getting in the pool with the filter running dangerous?
No,unless you can fit into the filter which is impossible,so yes,its safe.
When adding aluminum sulphate to swimming pool should the filter be running?
Add the aluminum sulphate to the pool. Run the filter for two hours. Wait overnight to vacuum the bottom of the pool.
