The MAF and the MAP sensor both are obviously electronic and you can not tell by looking at them if they are good or bad
One reason that a 2000 GMC Jimmy engine stalls while driving could be your filter needing to be changed. The problem could also be a bad sensor.
Stalling when stopping can be a sign of a bad lock-up torque converter solenoid. But if it stalls while in park, it may also be a very bad vacuum leak, especially if it idles rough. I am assuming it has good plugs and plug wires.
Why engine stalls on 1993 Chrysler Intrepid while driving and sometimes at stops?
The engine stops.
vacuum leak
Check for vacuum leaks.
The light comes on when the car stalls because the engine is not running and the pump therefore is not pumping. The pressure will always be 0 when the engine stalls and the light is directly related to pressure. This is normal, you have no problem, other than the engine stalling.
The idle speed needs adjusted upward if an engine stalls when you take your foot off the accelerator while stopping or turning.
If a car engine stalls when turning, there could be a problem with the power steering pump. There could also be an issue with an emissions control device.
i have a 2000 dodge work van 318 engine when i start in the morning it stalls several times until it warms up then ok
take it to a mechanic
clutch switch is bad