0
How do you change the belt tensioner pulley on a 1998 ford contour?
Wiki User
∙ 18y ago
what engine??
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
How do you change the serpentine belt on a 1998 Chevy 1500 5.7?
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
How do you put a pulley on a tensioner in a 1998 dodge caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
How do you change the belt on a 1998 Chevy Prizm?
Begin by loosening the tensioner pulley. Slide the tensioner pulley to the right and the belt will become loose. Remove the old belt and put the new belt on. Tighten the new belt by sliding the tensioner pulley to the left.
Where is the idler tensioner pulley on a 98 dodge Dakota?
The 1998 Dodge Dakota tensioner pulley will be the top pulley on the left-hand side of the engine. The tensioner pulley will be able to slide back and forth.
Why does your serpentine belt squeak when you turn your 1998 Dodge avenger on?
The Serpentine Belt needs to be tightend with the tensioner pulley (Idler Pulley)
How do you remove the crankshaft pulley from a 1998 ford contour 2.0 4 cylinder?
Use a chain wrench around the pulley and a breaker bar on the bolt.
How do you adjust the power steering belt on a 1998 Nissan frontier?
Using a 14 mm wrench, loosen the bolt in the center of the tensioner pulley, then tighten the tensioner bolt with the same wrench. Then re-tighten the bolt in the center of the tensioner pulley when the belt is tightened to your liking.
Has there been a recall on the tensioner pulley water pump or anything else on the 1998 Catera?
Yes. on the pulley for sure. Maybe the pump too. preasure the dealer.
What belts and hoses should be replaced when changing the water pump in a 1998 Audi A4 V6?
All these here should be replaced as per post somewhere else: timing belt, water pump, tensioner, tensioner pulley, and idler pulley
How do you change a crankshaft pulley on 1998 Dodge Grand Caravan 3.3 L?
Disconnect the battery. Using a metric socket and a breaker bar turn the tensioner clockwise and release the belt. Using a metric socket take off the bolt in the middle of the pulley. Use a pulley puller and pull it off.
How do you repair the tensioner pulley on a 1998 GXE?
See if your local library has a professional shop manual to look at for free... dave
What does the alternator belt on a 1998 ford contour look like?
Well, its black and wraps itself around the smallest pulley on the alternator.
