Drill it out and when replacing use a screw.
how do you install spring on interior door handle of a 98 chevy pickup
You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.
It is not too hard. You will have to remove the door panel, then you will see how the interior handle is riveted to the metal door frame work. You will need to drill these rivets out and install the new handle with either rivets or screws.
== == == ==
Remove the inside door panel of your 1994 Chevy Lumina. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
Under the dash, drivers side, close to the e-brake assembly.
There should be two bolts on each side of each handle. Get a screw and as carefully as you can unscrew them and tack the handle off.
There is a spring clip on the back of the handle that you have to get off before the handle will pull off, go to the parts store and get the special window crank removal tool to get it off.
Should be able to access after removing interior door panel
Take the interior door panel off, maybe a screw behind the inside door handle and armrest; window crank clip; carefully pry the rest. Then 3 nuts hold the mirror on.
in the bottom of the washer fluid reservoir over the battery on the drivers side near the headlight assembly
remove interior panel and unscrew large black plastic nuts, remove light assembly