Hi, Not an easy question to answer or an easy job to do. You will require a service manual to do this. It will require removing the transmission,clutch and oil pan if it is a rear seal. Good luck
If im not mistaken its on the rear towards the right
You have to start by pulling out the transmission, this will give you access to the rear cover of the engine, and the rear crankshaft oil seal. You have to remove the rear engine cover once exposed, then you can pop out the old seal and press in the new one! And re-install transmission.
Front disc minimum is 1.118" Rear min is .724"
Begin by removing the rear engine cover from your 1997 Land Rover Discovery. Remove the crankshaft sensor wiring harness. Remove the crankshaft sensor retaining bolts. Reverse the process to install your new crankshaft sensor.
The crankshaft sensor, on an LDV Maxus can be changed by removing the rear engine cover. The sensor is attached to the crankshaft with 3 bolts. Remove the bolts and install the new sensor.
The rear crankshaft sensor is located on the back of the crankshaft. The rear engine cover will need to be removed in order for the sensor to be visible.
The 1998 Montero Sport crankshaft sensor will be located on the rear of the engine. The crankshaft sensor is on the inside of the rear engine cover.
The 2014 Mitsubishi Outlander has 37.3 in. of rear leg room.
The 2013 Mitsubishi Outlander has 56.1 in. of rear shoulder room.
The 2002 Mitsubishi Lancer has 36.6 in. of rear leg room.
The 2007 Mitsubishi Outlander has 38.3 in. of rear head room.
The 2008 Mitsubishi Lancer has 54.1 in. of rear hip room.