I'm not sure if this is the right answer but to remove the screen over the speaker is relatively simple. Just pry around the edges with a screw driver until it pops off. If you are trying to remove the speaker or get to its connections, well that's another story.
Begin by removing the rear speaker covers in your 1996 Chevy Lumina. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install your new speakers.
How to remove steering wheel on Chevy lumina 2000
Sorry But You Will Have To Remove The Fuel Tank
The 1993 Chevy Lumina 3.1 liter engine timing belt can be found on the front of the engine. You will need to remove the front engine cover in order to access the timing belt.
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
The Chevy Lumina dashboard is held in place with retaining bolts and retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
You will need to remove the retaining ring at the top of your 1998 Chevy Lumina ignition switch. Slide the ignition switch out. Remove the wiring harness.
Drain the oil from your 1996 Chevy Lumina oil pan. Remove the oil pan retaining bolts. The oil pan will come off.
Begin by removing the tire and wheel from your 2000 Chevy Lumina. Remove the brake spring and the break caliper. The rear brakes will come off.
The intermittent power window module for your 1996 Chevy Lumina can be found inside of the driver door. You will need to remove the door panel in order to access the power window module.
Remove the positive cable from your 1992 Chevy Lumina battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the cylinder head from your 1992 Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.