If you don't have the manual, and something tells me you don't, you might need to experiment a litte. Holding down buttons for longer than two seconds works on some, and pushing two butons simultaneously works for others. Try the far right buttons that control the CD player, or if the tuning knob can be pushed, do that, until the clock digits start blinking. That's the key; you need to get the numbers to blink. Look for the small writing on the face of the radio around the knobs and buttons. Once you have some sort of menu, the tuning knob can be turned to scroll through to the clock sometimes. Every clock is different it seems, so get in there and try different things. Sorry if this doesn't help. but I've seen a few and they are a real challenge sometimes. There might be a little hole to poke a pen through, too. I find that the last two buttons on the right do the trick a lot of times.
The details I have give the following instructions
INSP- Inspection Service
Press & hold the button located under the speedo
Switch Ign on
Keep the button pressed untill"---" appears in the display
Release the button
Switch Ign off
If required clear the Oil indicator by using the same method
best wishes
Fandango - ticket service - was created in 2000.
By the year 2000, Escotel started its mobile service in Kerala.
Check all the 20A fuses, and you probably have a coin in your cigarette lighter. If the under dash lights flicker when you push the horn button, and the radio resets it's clock every time you open the door, it is almost definitely just a fuse issue. (this wouldn't have anything to do with the poor starting.)
Pandora's Clock - 1996 TV was released on: Canada: 10 November 1996 USA: 10 November 1996 UK: 21 March 1997 Japan: 29 August 1997 (video premiere) Germany: 23 November 1997 Portugal: 15 January 1998 Sweden: 7 November 1999 Hong Kong: 18 January 2000
Sydney 2000 Games of the XXVII Olympiad - 2000 2000-09-25 was released on: USA: 25 September 2000
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
Reset time on the clock is 1 PM. Just disconnect and reconnect the batttery at 1 PM.
On my 1998 SLK 230, at 2000 miles before the next service is due, a wrench appears in the screen below the trip odometer at the bottom of the speedometer when the igniton is turned on. When you go past 2000 miles without servicing and reseting the maintenance service reminder, it will start counting the miles past due. -400 means you are 400 miles past due for service, most likely an oil change. When the service reminder is reset, it resets to 7500 miles until it reminds you again for the next service. If you change the oil yourself as I do, I can reset the service reminder in my 1998 by: Turn the key in steering lock to position 1 Press the trip odometer reset button and hold Turn key in steering lock to position 2 After about 10 seconds, you will hear a chime and the display will show 7500 miles Release the trip odometer reset button
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
Push and hold the HR or the MIN buttons
Your owners manual will have all the info you need to do that.
no reset switch in this system
In order to reset the service light on a 2000 reg Megan you\'ll need to start by turning the ignition switch to the "On" position without starting the engine. Once the service light appears on the dashboard you can reset it by following these steps: Press and hold the odometer reset button Turn the ignition switch to the "Off" position Release the odometer reset button Turn the ignition switch back to the "On" positionAfter following these steps the service light should reset and no longer appear on the dashboard.
In order to get your SRS Service Airbag light reset, You have to go to the Volvo dealership.
2000 F150 Harley-Davidson
vehicles on fixed interval servicing can be reset as followsPress and hold button "A" (positioned right of trip recorder display)Switch ignition ONThe word "SERVICE" will appear in the trip recorder displayRelease button "A"Turn button "B" (positioned left of trip recorder display) to the right to reset the displaySwitch ignition OFFThis applies to fixed service intervals only appearentlyButton "A" is the trip resetButton "B" is the clock set