If you're talking about paying someone to do it.....it can be costly. It's a difficult and time consuming job. Just depends on what area you're in, who you have do it...etc.
You cannot replace just the bushings. You have to replace the whole control arm.
I am having my strut bushings and sway bar links replaced for $330 in northern IL. NOT at the dealer. They wanted $800.
I paid $425 at Gary Blake. 2001 9-5 Wagon 2.3t
I paid $900 for shocks/struts and bushings. I was told that was the "brother in law" discount.
how do i replace the front end bushings on 1997 Tahoe
I just got mine done today. The dealer wanted 300 dollars. I took it to a friend's garage and it was 150.00
How much does it cost to replace the upper and lower control arm bushings on a 1998 Chevrolet S-10? Upper control arm bushings are quoted at about 1.9 hours fro each side. However, if both are done then 3.5 hours total. Lower control arm bushings are 1.9 hours for one side and 3.4 hours for both sides. Just apply your shop's labor rate to the above hours. Note: Not all mechanics use the same book to estimate time for reapirs. This data is provided by Alldata. Mitchell Brothers could be different, as could the other services. Note 2: Upper control arm bushings are far easier to replace than lower control arm bushings because they are far more readily accessibly.
Need to know which bushings, there are many bushings in a vehicle.
Its the bushings on your suspension, It will cost $200 dollars to replace at a shop.
You may replace the bushings by pressing them out or replace the knuckle assembly. Pressing out the old bushings and replacing them is the least expensive option. After market replacement
Have to remove the door, then remove pins and bushings
You may replace the bushings by pressing them out or replace the knuckle assembly. Pressing out the old bushings and replacing them is the least expensive option.