0
Do you want to know how much torque the powertrain for this vehicle puts out or the torque spec for a certain bolt. If its a bolt you need to let us know what you are trying to tighten.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What are the head bolt torque specifications for a 1995 Chevy S10 2.2?
The cylinder head bolt torque specs for a 1995 Chevy S10 2.2L are as follows: 1st: Torque the long bolts to 46 ft lbs, short bolts to 43 ft lbs 2nd: Turn all bolts an additional 90 degrees
Dodge 4.7 water pump Torque Specs?
43 from dodge
Head gasket torque specs for a 2000 Pontiac sunfire 2.2L?
The short bolt torque specs for the head gasket of a 2000 Pontiac Sunfire is 43 foot pounds. The torque specs for long bolts is 46 foot pounds.
What is code 43 1992 Chevy S10 blazer?
knock sensor
What are the torque specs for the main caps and the rods caps on a 71-73 Pontiac 400?
Torque specs for 71-73 Pontiac 400 main cap bolts 100 ft-lbs, rear mains 120 ft-lbs. Rod bolt specs 43 ft-lbs respectively.
1998 Chevy s10 2.3 cylinder head bolt torque?
46 ft/lbs for long bolts and 43 ft/lbs for short bolts also rocker arm bolts need to be torqued at 19-22 ft/lbs
What are the torque specs for the main bolts on the water pump of a 1993 Jeep Cherokee Sport 4.0 liter 6-cylinder?
They are 43 Ft. lbs
Where can you find a schematic for the ignition control module of a 43 vortec engine in a 1994 Chevy Blazer S10?
Owners manual, positive.
What is the torquing specs for the bolts on a 1999 blazer 43 intake manifold The book gives 132 pounds but this seems too much?
I FOUND THIS AT WWW.AUTOZONE.COM, CLICK ON VEHICLE SPECS . For your 1999 CHEVROLET TRUCK BLAZER 2WD: INTAKE BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE LOWER MANIFOLD BOLTS TO 27 IN/LBS TORQUE LOWER BOLTS TO 9 FT/LBS TORQUE LOWER BOLTS TO 11 FT/LBS TORQUE UPPER MANIFOLD BOLTS TO 44 IN/LBS TORQUE UPPER MANIFOLD BOLTS TO 7 FT/LBS (TO TORQUE BOLTS & NUTS, START IN CENTER USING CRISSCROSS PATTERN)
What are the cylinder head torque specs for a 97 Dodge Ram 2500 V10 8L?
Step 1 - 43 ft lbs Step 2 - 105 ft lbs Step 3 - 105 ft lbs.
What are the cylinder head torque specs and torque sequence on a 01 s10 2.2l?
Tighten the long bolts to 46 ft/lbs. Tighten the short bolts to 43 ft/lbs. #1 is between cyl 2 and 3 (middle bolt, long), pushrod side. 46 ft/lbs #2 is middle short bolt. 43 ft/lbs #3 is short bolt between cyl 1 & 2 43 ft/lbs #4 is long bolt between cyl 1 & 2 46 ft/lbs #5 is long bolt between 3 & 4 46 ft/lbs #6 is short bolt between 3 & 4 43 ft/lbs #7 is short bolt at front 43 ft/lbs #8 is long bolt at front 46 ft/lbs #9 is long bolt at rear 46 ft/lbs #10 is short bolt at rear 43 ft/lbs "After this, (using torque angle meter) tighten in same sequence another 90 degrees."
What are the torque specs for the head bolts on a 1999 cavalier with a 2.2L engine?
for a 2.2 ohv engine step 1 is 43 in/lbs for short bolts and 46 in/lbs for long bolts. step 2 is tighten an additional 90 degrees.
