A load line is used in graphical analysis of nonlinear electronic circuits, representing the constraint other parts of the circuit place on a non-linear device, like a diode or transistor. It is usually drawn on a graph of the current vs the voltage in the nonlinear device, called the device's characteristic curve. A load line, usually a straight line, represents the response of a linear circuit connected to the nonlinear device in question. The operating point(s) of the circuit are the points where the characteristic curve and the load line intersect; at these points the current and voltage parameters of both parts of the circuit match
A dc load line is formed by joining the 2 points wherin the slope is equal to the inverse of the load resistance.. whereas the ac load lin has a different slope... and it intersects the dc load line at the quiescent point.
The cut-off point is the exact point where the load line crosses with the vector axis. The saturation point is the point where the load line intersects with the collector current axis.
A: A transistor has voltage gain as base current is allow to flow. If the load is constant then a DC mirror azimuth path can be plotted as a function of base current and collector current and that is the load line
cutoff and saturation
The term, 'unbalanced system' refers to an unbalanced load. Under normal circumstances, an unbalanced load leads to unbalanced line currents. The line voltages are determined by the supply and remain symmetrical, even when the load is unbalanced. As your question refers to a 'line to neutral' voltage (i.e. a phase voltage), you must be referring to a star (wye) connected load, in which case the phase voltage (line to neutral voltage) is 0.577 (the reciprocal of the square-root of 3) times the line voltage (line to line voltage).
line and staff concept concept of line and staff organization
what is load line of transistor what is load line of transistor
well the difference mainly exists in the method of finding them , these are :-1. in finding DC load line :-open all AC sourcesopen all the capacitors2. for AC load line:-open all the Dc sourcesshort all the capacitors.
The line wire will be hot and carrying power when the breaker is on. The load wire will not be hot and will have no voltage on it until it is connected with the line wire.
no load voltage - full load voltage by full load voltage
when the dc supply given, dc load line lies in the Ic and Vcc. when the AC supply given, AC load line lies in the Ic and Vcc.
A dc load line is formed by joining the 2 points wherin the slope is equal to the inverse of the load resistance.. whereas the ac load lin has a different slope... and it intersects the dc load line at the quiescent point.
The dc load resistance is Rc but the AC Load resistance is (RcRl). If a load line is drawn the slope of which is -1(Rc Rl) . Then it is called an AC load line and it is to be used when the transistor is operating as an amplifier.
Frequency is set by the supply, not by the load.
A: Vce is the voltage that will follow a particular load line. It is linear by itself but not related to the base drive.
The cut-off point is the exact point where the load line crosses with the vector axis. The saturation point is the point where the load line intersects with the collector current axis.
A double number line is a standard concept in math and arithmetic. This concept is usually taught in algebra courses.