Exactly where on the engine is the oil coming from? This would need to be identified before any suggestions could really be made as to why that would happen. Oil pan bolt not tight? A hose or something with a leak? Hole in engine block or plug in engine came out? This needs to be researched a little more before any further advice can be given. Jack the car up, use jackstands, block the rear tires, and have someone start the car and push on the gas or move the throttle cable in the engine compartment while you look to see exactly where this is coming from. Above all else use caution and make sure proper procedures are followed whenever lifting and working under the vehicle! -Shaun
The engine coolant drain plug in the 1996 Ford Probe 4-cylinder is located at the bottom end of the radiator. There is a coolant reservoir at the top of the engine as well.
The petcock should be along the bottom edge of the radiator facing the engine. It is probably close to the bottom hose connector.
its a Mazda engine . ( DOHC 4cyl. 16 valve 2.0l ) For the probe 1993
One day i would like to probe the bottom of the ocean!
Japanese Motor that is frequently engine swapped into a Ford Probe.
Ya check the bottom drawer@Probe =_= its not there.
The 1993 Ford Probe oil filter can be found on the left side of the engine. The oil filter will be near the oil pan. The oil filter is easily seen from the bottom of the engine looking up.
where are timing marks on 89 ford probe 4 cylinder I have the bottom not the top
no, the 89-92 engine/transmissions are different from the 93-97 ford probe.
stock enginestock engine in 1994 ford probe GT is a Mazda 2.5L 24 valve V6.
Yes , according to the Gates website the 2.0 liter 4 cylinder in a 1996 Ford Probe IS an interference engine
on a 2.0L engine. no