http://z.about.com/d/autorepair/1/0/e/K/42276556.gif
Or go to AutoZone.com and follow the prompts they have complete schematics for most makes and models
What do you mean... A Dynasty has several Relays... they are located on the driver side of the car, on the inner fender.
The 1991 Dodge Dynasty starter relay switch can be found in the fuse box. The starter relay switch will be in the third column, third from the top.
on the 89 dynasty, it is located right next to the thermostat
on the 89 dynasty, it is located right next to the thermostat
It is inside the ECM Module
Ign relay at main ign switch behind the steer.
Could be relay or the fan sensor itself that goes on the side in the back of the water pump housing... the fan is surpost to kick on when the engine reaches 192 Degrees.
Dodge doesn't use an inertia switch. It controls the fuel pump via a pcm actuated relay.
there is no relay for this. you just need to replace the switch. I had this happen to me, took me three days to figure it out.
The ASD is a relay controlled by the PCM and does not have a reset.The ASD is a relay controlled by the PCM and does not have a reset.
The coolant temperature switch and the cooling fan relay (same thing) is usually located in the water outlet housing. It will be the bigger sensor, the smaller is the temperature gauge sensor.
under hood a outboard fuse and relay box next to air intake hose pop off lid violia there it is hope that helps