Top front near center of engine,a bit on the driver's side, partly under the
intake manifold. only sensor in the area(wires connected to it)
It CAN be removed and replaced without removing intake manifold.
(a little filing and a little forcing)
It is bolted to the bell housing on the passenger side.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
Passneger side of the bell housing.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
It is on the front driver side of the timing cover.
Passenger side of the bell housing, behind the engine.
A 1995 Chrysler Concorde only has one oxygen sensor on each side. They are screwed into the exhaust manifolds.
on the intake manifold next to the prestone resevoir
The Crank position sensor is located on the right side behind the wheel about midway up the motor eaiseier to get to from the bottom with 10mm socket one bolt
Trouble code P0340 means:Camshaft position sensor circuit malfunction
The map sensor is screwed into the side of the upper intake manifold.
It is on the passenger side of the transmission bell housing, just behind the engine.