The rocker arm torque specifications, for your 1990 4.3 liter Chevrolet engine, is 15 pounds per square inch. The rocker arm should be torqued in five pound intervals.
Chevrolet Cavalier there are more than 100 torque specifications for your 2003 Chevrolet Cavalier. You can get a complete list of torque specifications from most Chevrolet dealerships.
According to most Oldmobile torque specs, the correct torque for rocker arm bolts is 25 ft-lbs.
what are the torque specs on a 3.4 s.f.i
The 1997 Pontiac Transport 3400 rocker arm torque specifications are 18 pounds. The rocker arm should be torqued in six pound intervals.
For the 1989 Chevy S-10 with the 2.5 liter engine, the torque setting for the rocker arm bolt is 22 ft. lbs. The torque setting for the rocker arm cover is 75-inch lbs.
The torque specifications fourth the rocker arms, on your C 15 Caterpillar diesel engine, is 14 pounds per square inch. The rocker arm should be torqued at seven pound intervals.
22 foot/lbs
On a cast iron intake the torque is 30 lb/ft.
By removing the valve cover from the engine, then removing the rocker nut on the bad rocker. Refer to a technical manual for torque specifications, as this must be properly torqued!!!
There isn't a torque setting. You adjust the valves by tightening each rocker arm until there is no clatter and then tighten them 1/2 turn more.
All of the torque specifications for vehicles can be found in Haynes Repair Manuals available at most auto parts stores.