There is a separate flasher for the turn signals that looks the same as the 4 ways. Your's is probably bad. Check your owners manual or your Chrysler dealer for its location under the dash.
Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,Fuse, flasher, switch, bulbs, wires, ignition not on, dead battery,
check your fuses first, then check your bulbs and then your relay.
are you asking about the turn signal bulbs , the turn signal switch or turn signal flasher ?
If the bulbs and fuse are good, replace the turn signal Flasher Relay.
Try checking the turn signal flasher. Not to be confused with the hazard flasher.
Check: Fuse Turn signal flasher Switch at steering column Bulbs
The signals and the emergency flashers have separate circuits, separate fuses, separate flasher relays. Start with checking the fuses, the bulbs, the signal flasher relay and wiring and if it still doesn't work it may be the signal switch is bad.
Bad turn signal flasher? Bad turn signal switch? Blown fuse? Bulbs burnt out?
Turn signal flasher?
You will need to locate the turn signal flasher and replace it.
If the turn signal bulbs light but will not flash, the flasher relay is defective, replace it.
Turn signal flasher