Yes. Or the key. A locksmith could help diagnose this problem for you.
You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.
The ignition cylinder on a 2002 Hyundai is a quick repair. First the lower steering column will need to be removed so the lock cylinder can be accessed. Once off, loosen the mounting screws for the cylinder. Insert the key and push the tab in while turn the key slightly so the cylinder can be unlocked from the housing.
1988 gmc safari Steering column switches and ignition key lock cylinder replacement?
The ignition lock switch is found under the steering column on a 2004 Honda Civic. Remove the steering column and ignition switch. Loosen the mounting screws that hold the cylinder in place. Pull and replace the lock cylinder.
how do you get ignition switch out of steering column in 2000 catera?
Usually you have replace the ignition key cylinder.
remove steering wheel with a puller, remove turn signal switch, remove tilt steering spring by pushing down and turning slightly counter clockwise, this should give you access to the torx screw . remove this screw and slide ignition lock cylinder out
Maybe your steering wheel it's keeping the ignition cylinder to turn, so move the steering wheel and at the same time try to turn the key. Maybe you need to replace the ignition cylinder key lock
the steering wheel will lock and the key will come out, unless of course the ignition cylinder is broken
Ignition switch and lock cylinder removal 1988 Dodge Ram 50.Disconnect the negative battery cable from the battery.Remove the steering column cover to gain access to the ignition switch/lock cylinder.Using wire cutters, remove the cable band.Remove the bolts that hold the ignition switch/lock cylinder to the steering column.Unbolt and remove the key reminder switch and remove the switch lock cylinder from the steering column.
Remove steering wheel and signal switch
you will need to pull the steering wheel and column cover then it will be simpl to pull out cylinder and replace it.