A 350 block with a 327 crank is called a 327. Bore it 60 over and it becomes a 337. Don't know what pop up heads are. Never heard of that.
350 and a 327
If you look at the rod bolt NUTS and if a 9/16 socket will fit it, Then it is a large journal. If they are a 1/2 inch, Then it is a small journal.
A small block 350 cc engine will not fit a 2005 Impala, but a 327 one will.
yes
A 350 is a small block and all the engine parts are small. The 454 is a big block and everything is big. Nothing will interchange.
The later 327's were exactly the same as the early 350's, so yes, a 350 crankshaft will fit a 327 block if it's a 1967 and up block.
Putting a 327 crank in a 350 makes it a 327. (3.25") You can't put a 327 crank into a 350 without changing the pistons. The piston would be 1/4" down in the hole, and would have very little compression.
The 305 shares stroke dimensions with the 350, so if you put a 327 crank in a 305, you'd have a de-stroked 305 with almost no compression. Displacement would be around 287 cid.
its s stroker crank that makes the 350 a 364
yes just get head gaskets for the 350 not the 327
It's a .060" over 350 with a 400 crank