the new one has a aeriator that's working right
cold water tub facuet is corroded bye hard water builtup and needs to be replaced. Hot water is okay. Its the right one with the cold water coming out
No conversion, it would need to be replaced with a single handle faucet.
I have never seen a faucet that has a nut on the line coming out of it. Usually it is a male connection and the nut is on the supply line between the faucet and the house supply. Anyway, if the line coming out of the faucet is messed up, you could probably cut it and use a compression fitting to go between the faucet and the supply line to the house line.
Seperate valve for outside faucet turned off, broken valve stem inside of outside faucet or handle stripped at faucet.
If you have bubbles coming out of your kitchen faucet, you have a venting problem. It has nothing to do with soap in your faucet.
Change the faucet, either one will mount on the sink.
it depends on Where it is leaking from and who the manufacturer is. Moen will replace your cartridge and or faucet for free as they have a lifetime warranty. if it dripping Under the sink you could have a bad valve which means that the entire faucet will need replaced. if it is dripping from the spout it is most likely the cartridge which can be repaired or replaced without having to remove the entire faucet. contact the manufacturer.
Most small problems can be fixed on most faucets. However it is easier in general to simply replace the whole faucet.
form_title= Delta Faucet form_header= Install a Delta faucet in your kitchen. What size Delta faucet do you need?*= _ [50] Do you have double sinks?*= () Yes () No Do you want to add a purifier?*= () Yes () No
form_title=Kitchen Faucets form_header=Install style in your home with a new kitchen faucet! When were the kitchen faucets last replaced?=_ Do you have a specific design of kitchen faucets you would like?= () Yes () No () Not Sure What kind of kitchen faucet do you currently have?=_
The glacier bay double handle faucet doesn't need to be soldered, but does require a bit of drilling.
The system may need a rebuild. depending on the brand, the faucet can have the internal ball and gaskets replaced to stop the leak.