If the squeaking sound is heard only when the ac is on, the ac pulley may need a little bit of WD-40 sprayed on it.
The belt is loose and needs adjusting, or it is worn out and needs replacing.
Check the alignment of belt in relationship to all pulleys. Check the condition of the pulleys. Also make sure the belt being replace is the recommended size. Auto shops have belt measuring tools to check the size of the belt before installing into your vehicle. You may have had a belt installed that was too large in the first place. The squeaks are a sign of a loose belt or a belt not recommended for your vehicle.
Replace or tighten the A/C belt. If equipped with a serpentine belt, replace it.
The ac belt has a tensioner that is accessed from below, and takes a tensioner tool to loosen. Remove the serpentine belt, release tension on the ac belt then the belt can come off for replacement.
The AC Belt connects to the crankshaft pully outer pully the one in front of the crankshaft belt
The ac belt will need to have the tensioner to take the belt off. The serpentine belt is in front of the compressor belt and will have to be removed first.
Belt about 20 bucks unless AC run by a "serpentine belt" (all one belt runs everything) then belt cost $ 80. and labor for serpentine $ 75. labor for just AC non serpentine belt $ 30
it's not really mileage that matters. it's the condition of the belt. symptoms of a bad belt are uneven wear, cracks the ribs, or if it squeaks. if the problem(s) persist with new belt check the condition of the pulleys and their alignment. it's not really mileage that matters. it's the condition of the belt. symptoms of a bad belt are uneven wear, cracks the ribs, or if it squeaks. if the problem(s) persist with new belt check the condition of the pulleys and their alignment.
????? The belt only drives the AC so all you have is the tensioner, AC and main pully!
ac belt replacement kia spectra 2005
It could be a worn or slightly loose fan belt. Check condition of fan belt, replace or re tension
You have to remove the ac belt first then the v belt. Once you get them off you need to replace the v belt and ensure it is tight enough. then the ac belt.