My first guess would be to check the fuse box under the hood on the drivers side. There is a diagran under the lid which shows what fuse to look for My first guess would be to check the fuse box under the hood on the drivers side. There is a diagran under the lid which shows what fuse to look for
No brake lights but turn signals work? Turn signal switch brakes route through it.
The breake lights on a 2003 Chevy suburban come on when the car is not being uesed, becausethat is the way thay are made?
If a 95 Chevy Suburban's brake lights do not work but everything else does, it may be the link that connects to the pedal that has a problem. If the pedal has been adjusted or disconnected, it may also be a reason for the issue.
Bad switch.
turn signal switch needs replaced!
yes just push the emergance brake one click.
burned out bulb, blown fuse, wiring
either dimmer switch or blown fuse If you are saying that the tail brake lights are working but the third brake light is not....It may be a defective turn signal switch in the steering column.
my 98 suburban did the same thing. when i changed my headlight switch that turns them off and on, they started working again.
It depends on the exact problem. If it's that both brake lights in the back do not work and the middle one works, it could be your turn signal switch.
Headlights? Brake lights? Tail lights? Signal lights? Courtesy lights? Dash lights? Check engine lights? Need more info please.
The hazard switch and the turn signal and brake lights are all incorparated, chances are the 3-1 switch is broke internally check all fuses